Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Rohnert Park
Electric gate repair in Rohnert Park typically runs $185-$520 depending on whether we’re replacing a control board, rebuilding a rotted post base, or retrofitting entrapment protection onto an older operator. Most calls are completed the same day or next morning. If your gate is stuck open, reversing on its own, or the keypad stopped talking to the motor, call us at (626) 649-4572 and a live person will answer, day or night.
Here’s what matters most in Rohnert Park: the city’s numbered sections were built in uniform waves from the late 1950s through the 1980s. That means the gate at the end of your driveway was likely installed the same year as your neighbor’s, by the same builder, with the same posts and hardware-part of the same wave of Gate Installation - Rohnert Park projects that defined each numbered section. When one fails, the whole block is usually right behind it. We know this pattern well, and we stock the parts to fix it before your gate leaves you stuck.
Every job includes a written price before we touch anything, shoe covers and drop cloths on every visit, and a cleanup photo before we leave. We also back every repair and installation with our 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print.
Why Latch & Post Gate Repair Is Rohnert Park’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family, operating since 2009 as an independently owned and operated gate specialist. We focus on three things: gate repair, gate installation, and Electric Gate Repair. That focus matters when an older Viking or DoorKing operator in Rohnert Park has a control board that’s no longer manufactured. We don’t guess. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Scheduling and dispatch are coordinated from our San Francisco Bay Area office, with crews serving Rohnert Park locally. That means a uniformed, background-checked technician shows up on time, tells you the price before any work begins, and treats your driveway and entryway the way we’d want ours treated. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean, and we can schedule around nap time if quiet matters.
The work we do is backed by the 365-Day Done Right Promise. If a hinge we re-hung starts to sag or a board we replaced fails within a year, we come back and make it right. That’s not a warranty buried in fine print. That’s the standard we’ve held since day one.
Gate Access Control in Rohnert Park
Gate Access Control in Rohnert Park means the full system that lets the right people in and keeps everyone else out: keypads, remotes, intercoms, loop detectors, phone-entry systems, and the safety sensors that keep the gate from closing on a car, a kid, or a dog. In Rohnert Park, we see a lot of access control retrofits on gates that were originally built with nothing more than a garage-door opener bolted to a post. Those systems weren’t designed for daily vehicle traffic on a windy plain, and they fail accordingly.
Keypad and Remote Replacement
A dead keypad on a windy afternoon is usually a corroded wire connection or a worn membrane, not a full system failure. In Rohnert Park’s damp winter fog, copper terminals oxidize faster than inland. We test the wiring before recommending a keypad swap. New wireless keypads for Ghost Controls or LiftMaster systems typically run $120-$260 installed in Rohnert Park, and we can program them to match your existing remotes on the same visit.
When we finish, we test the full sequence: gate opens, entrapment sensors clear, gate closes, safety edge trips correctly. Your family gets a gate that works, and we leave the keypad cover closed and latched so the morning fog doesn’t creep in.
Intercom and Phone-Entry Integration
Homes on larger Rohnert Park lots, especially in the Section 8 and Section 10 areas, often have an intercom or phone-entry panel at the driveway. These systems age poorly in coastal marine air, and the wiring connectors tend to corrode at the exact point where the cable enters the post. We can rebuild the connection, replace the panel, or upgrade to a cellular phone-entry unit that sends the gate signal to your phone instead of a hardwired handset. A phone-entry retrofit on an existing gate in Rohnert Park generally runs $350-$780 including labor, and you’ll see the exact number in writing before we start.
Commercial Gate Operator in Rohnert Park
Commercial Gate Operator work in Rohnert Park covers the heavier operators that run apartment complex gates, business park entrances, and the occasional small industrial yard off Commerce Boulevard or Redwood Drive. These are not the same units as residential openers. A DoorKing or Elite slide gate operator moves a gate that can weigh 800 pounds or more, and it’s in service dozens or hundreds of cycles a day. When it fails, it fails under load, and the gate usually ends up stuck wherever it stopped.
Slide Gate Operator Repair
We open the operator cabinet, test the limit switches and gear train, and check the chain or rack for slack. On Rohnert Park commercial properties exposed to the Petaluma Gap winds, chain stretch is common within a few years of installation. A too-loose chain can jump the sprocket and leave a 20-foot gate jammed half-open. We re-tension the chain, set the limits, and verify the safety loop detectors see a vehicle before the gate starts closing. A typical slide gate operator repair runs $290-$640 in Rohnert Park depending on the failure, and a full operator replacement is usually $1,800-$3,400 installed.
Swing Gate Operator Retrofits
For commercial swing gates with aging operators, the question is often whether the operator itself failed or the post it’s mounted to gave way first. In Rohnert Park’s older commercial strips, we regularly find the original 6×6 post rotted below grade from years of winter moisture and fog. No operator can work well on a moving post. We can set a new post in concrete, remount the operator, and then set the open and close limits correctly. The written price covers the whole repair, so you’re not surprised by a second invoice for the post work.
Trusted Brands We Service in Rohnert Park
We work on the brands Rohnert Park homes and businesses actually have: Viking, Ghost Controls, DoorKing, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because our technicians are factory-trained on these systems, the right fix usually happens on the first visit. We keep common control boards, safety photocells, remote transmitters, and limit switches stocked on our local trucks, so a Rohnert Park call doesn’t wait on a parts order from a warehouse three states away. If your operator is older and the board is obsolete, we’ll tell you plainly, and we’ll quote you a retrofit option that keeps your existing gate and posts where possible.
Common Electric Gate Repair Problems We See in Rohnert Park Homes
- Rotted 4×4 redwood posts set directly in soil. In Rohnert Park’s original sections, most side-yard and backyard swing gates were hung on 4×4 redwood or cedar posts set bare in the dirt. After 40 to 60 years of winter fog and seasonal moisture, the wood fails at the soil line. The gate sags, the latch misses the strike, and the operator strains against a post that’s rotted below grade. We dig out the old post, set a new one in concrete, and re-hang the gate with sag correction.
- Obsolete operator control boards and limit switches. Many Rohnert Park gates still run on operators installed in the 1990s or early 2000s, and the control boards for those units are no longer manufactured. When the board can’t hold its open and close limits, the gate reverses on its own or slams at the end of travel. We can often retrofit a current UL 325-compliant board into the existing operator enclosure, which is usually cheaper than replacing the whole unit.
- Petaluma Gap wind load on hinges and frames. The same afternoon winds that make Rohnert Park feel cooler than Santa Rosa also push steadily against every swing gate in town. Over a decade, that constant pressure pulls hinges out of alignment, stretches hinge bolts, and causes chronic sag. We correct the alignment and install heavier hinges on the windward side where the original hardware was undersized.
- Missing or dead entrapment protection on pre-UL 325 operators. Gates installed before the UL 325 standard took effect often lack working safety photocells or edge sensors. That’s an entrapment hazard, especially on a gate that weighs several hundred pounds. We test the sensors on every visit. If they’re missing or dead, we add current-compliant protection as part of the repair.
Pricing for Electric Gate Repair in Rohnert Park, CA
Here are real numbers for Rohnert Park’s market. A hinge replacement with sag correction runs $185-$320. A post reset in concrete, including a new 4×4 post and re-hanging the gate, runs $280-$520 depending on whether the operator needs to be remounted. Control board replacement on a LiftMaster, Ghost Controls, or Viking operator runs $260-$540 installed. Safety photocell or edge sensor replacement runs $160-$310. A full operator retrofit, including a new board and entrapment protection on an existing gate, runs $850-$1,700. Every price is written and agreed before we start, so the number you approve is the number you pay.
For an exact quote on your gate, call (626) 649-4572. Estimates are free, and there’s no pressure to accept.
We Also Serve Cities Near Rohnert Park
Our crews cover Cotati, Petaluma, Santa Rosa, and Sebastopol in addition to Rohnert Park. If you’re on the east side of town or just over the line in Cotati, we can still get to you. Check our full Rohnert Park service area or call us directly at (626) 649-4572 to confirm coverage for your street.
Serving Rohnert Park, CA - Our Local Coverage Area
We’re based in the Rohnert Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Rohnert Park
In Rohnert Park, it’s usually both, but the root cause is almost always the gate itself. A rotted post in the soil or a hinge that’s pulled out of alignment forces the operator to work against extra friction every single cycle. The operator isn’t failing; it’s being asked to do a job the gate can’t help with. We correct the hinge geometry and post footing first, then re-test the operator under its normal load. That sequence usually saves you the cost of replacing an operator that wasn’t actually broken. Call (626) 649-4572 for an exact diagnosis and a written quote, free.
In most cases we can retrofit a current control board into an older operator’s existing enclosure, as long as the motor and gearbox are sound. We’ve done this many times on LiftMaster and DoorKing units in Rohnert Park where the original board was discontinued decades ago. If the motor is also failing, replacement makes more sense than a retrofit. Either way, you get a written price for both options, and you choose. A retrofit is typically $260-$540 on residential systems.
Probably not, unless it was installed or updated after entrapment protection became mandatory under UL 325. Most gates in Rohnert Park’s original sections went in before that standard applied, and many still lack working safety photocells or edge sensors. We test the entrapment protection on every visit. If it’s missing or dead, we add current-compliant sensors or a safety edge as part of the repair so the gate stops and reverses when it meets resistance. That protects your kids, your pets, and your visitors. Call (626) 649-4572 and we’ll test yours.
Wind. Santa Rosa sits in a more sheltered bowl, but Rohnert Park sits directly on the Santa Rosa Plain in the path of the strong afternoon winds that funnel through the Petaluma Gap in the coastal range. Those winds push constantly against swing gate frames and hinges, creating fatigue wear that shows up as chronic sag and latch misalignment. In Rohnert Park we install heavier hinges on the windward side and check hinge bolts for stretch on every visit. It’s a local condition, and it’s predictable once you know what to look for.
Yes. We service both swing gates and slide gates, residential and commercial. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the vast majority of gates in Rohnert Park, from the ranch-style homes in Sections 1 through 10 to the commercial gates off Commerce Boulevard. Call (626) 649-4572 with your gate’s brand and symptom, and we’ll tell you honestly what it will take to fix it.
Call Latch & Post Gate Repair for Electric Gate Repair in Rohnert Park
If your gate is stuck, reversing, sagging, or just making a sound it didn’t make last month, call us at (626) 649-4572. A live person answers around the clock, seven days a week, nights and holidays included. We’ll schedule a visit, show up on time, give you a written price before any work starts, and leave your property as clean as we found it. All work is covered by our 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Rohnert Park and the surrounding Sonoma County communities since 2009.