Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Richardson
Electric gate repair in Richardson usually means one of three things: an operator motor that’s burned out, a control board that no longer talks to the keypad, or a gate that drags because the Blackland Prairie clay under the posts moved again. Most repairs run $180 to $640 depending on which part failed, and our crews serve Richardson every weekday with same-week scheduling for non-emergency calls. If your gate won’t open at all, call (626) 649-4572 and a live person answers, day or night.
We’re Latch & Post Gate Repair, part of the Cedarwell family of independently owned and operated gate specialists. We work on the equipment Richardson homeowners and businesses actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Electric Gate Repair technicians are background-checked, uniformed, and trained to leave your driveway and home exactly as they found them.
Why Latch & Post Gate Repair Is Richardson’s Preferred Electric Gate Repair Company
Richardson is a specific kind of place for gate work. You have the Telecom Corridor along US-75 with its corporate campuses and automated access systems, and then south of Belt Line you have brick ranch homes from the 1960s and 70s, many still on their original wrought-iron swing gates. That’s the work we know. When we pull up to a house near Arapaho or Campbell Road, we’re not seeing it for the first time. We’ve been on similar blocks, with similar soil, and the same 40-year-old steel posts.
What Richardson homeowners tell us they value isn’t just the fix. It’s the written price before anything starts, the shoe covers and drop cloths inside the house, and the cleanup photo before the technician leaves. C.A.R.E. isn’t a slogan here. It’s a routine. Cody Beckman, who leads Latch & Post, built the company in 2009 around a single observation: every gate comes down to two parts, the latch that holds it and the post that carries it. Focus there, and everything else follows. That’s why we carry a 365-Day Done Right Promise on every repair and installation. If it isn’t right, we make it right. No argument, no fine print.
Every call to (626) 649-4572 is answered by a live person, 24 hours a day, 7 days a week. Nights, weekends, and holidays included. No voicemail, no callback queue.
Commercial Gate Operator in Richardson
Commercial gate operator service in Richardson centers on the Telecom Corridor, where gates on corporate campuses along US-75 and north of Campbell Road run dozens of cycles a day and can’t afford a failure at 7 a.m. The job involves diagnosing the operator motor, drive train, safety loops, and control board, then repairing or replacing the component that failed. For a commercial slide gate operator in Richardson, expect to pay $680 to $1,950 depending on the operator type and whether it needs a new control board or full replacement. You’ll see the exact number in writing before we touch a thing.
Operator Motor Failure
Commercial operators in Richardson fail most often at the motor mount and the drive gear, especially where gates were installed on pads that have shifted with the clay. We inspect the motor, the gearbox, the chain or rack, and the safety loops in one visit. If the motor is saveable, we rebuild it. If it’s cooked, we quote a replacement that matches the existing access control setup.
Telecom Corridor Access Systems
Campuses near Samsung, Ericsson, and the other corporate offices along US-75 often run legacy DoorKing and FAAC operators tied to HOA or security keypad systems. We coordinate with property managers to keep the gate live during business hours, and we schedule after-hours work when a full operator swap would block traffic. Quiet tools matter on these jobs because offices are still occupied while we work.
Gate Opener Repair in Richardson
Gate opener repair in Richardson is the most common service call we handle for residential swing and slide gates, and it usually starts with a homeowner noticing the gate hums but doesn’t move, moves halfway and reverses, or the remote stopped working entirely. Most Richardson gate opener repairs run $180 to $520, with the most common culprits being stripped gears, failed capacitors, dead receiver boards, and motors burned out from dragging against a heaved post. A written price comes before any work begins.
Opener Gears and Motors
On LiftMaster and Linear swing gate openers, the plastic drive gear is often the first part to strip, especially when the gate drags for months before anyone calls. We replace the gear, check the motor windings, and adjust the travel limits so the opener isn’t fighting the post. If the motor itself has failed, we explain whether a motor-only replacement or a full operator swap is the cheaper answer.
Remote, Keypad, and Receiver Issues
When a Richardson homeowner says the remote stopped working, we test the remote battery, the receiver board, and the keypad wiring before replacing anything. Many older LiftMaster receivers in south Richardson don’t accept newer rolling-code remotes, which means a receiver board upgrade, not just a new remote. We stock those boards locally so the fix happens on the first visit.
Trusted Brands We Service in Richardson
Our Richardson technicians are factory-trained on LiftMaster, FAAC, and Linear operators, plus BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a FAAC hydraulic operator from a Telecom Corridor slide gate shares almost nothing with a residential LiftMaster swing opener beyond the name “gate.” We keep common LiftMaster gears, FAAC control boards, and Linear receiver boards on our trucks, which means a faster turnaround for Richardson customers and fewer return trips to the parts house. If the brand on your gate is one we don’t service, we’ll tell you honestly and point you in the right direction. We’d rather lose a call than waste your afternoon.
Common Electric Gate Repair Problems We See in Richardson Homes
- Blackland Prairie clay heave. The soil under south Richardson homes swells after spring rain and shrinks in summer drought, shifting gate posts 1 to 3 inches a year. When the post moves, the gate drags on the concrete, and the opener motor burns out trying to push it. This is the single most common reason Richardson gates fail, and it’s rare in sandier-soil suburbs like Frisco or McKinney.
- Obsolete control boards. Many 1980s and 1990s-era LiftMaster and Linear boards in Richardson won’t accept modern safety photocells or rolling-code keypads. Homeowners either run the gate without safe reversing protection or upgrade the board. We walk through both options honestly.
- Worn hinge posts on original wrought-iron gates. The 1960s and 70s ranch blocks around 75080 and 75081 have dozens of swing gates still hanging on their original steel posts. After 40 to 60 years, the post fatigues at the weld or the hinge pin wallows out. We often correct the post alignment and rebuild the hinge rather than replacing the whole gate.
- Ice storm lockup on rack and pinion drives. North Texas ice storms seize slide gate drives that were never lubricated for cold weather. We see this most on commercial slide gates in the Telecom Corridor that run daily and fail without warning on the coldest morning of the year.
Pricing for Electric Gate Repair in Richardson, TX
Here’s what Richardson homeowners and businesses can expect for common electric gate repairs: a gate opener repair with parts runs $180 to $520, a control board replacement $240 to $480, a safety sensor or photo eye replacement $140 to $260, and a full operator replacement (including labor and most residential operators) $640 to $1,450. Commercial slide gate operators range higher, from $680 to $1,950. The exact price for your gate is quoted in writing before any work starts. We don’t leave an invoice bigger than the quote, period. If you’re budgeting a repair, call (626) 649-4572 and ask for a free estimate. A live person will answer.
We Also Serve Cities Near Richardson
While Latch & Post Gate Repair focuses on Electric Gate Repair in Richardson, our crews also serve Addison, Plano, Garland, and Carrollton. The same written pricing, shoe covers, and 365-Day Done Right Promise apply in every one of those cities. If you live just over the line in Addison or Garland, you will get the same Richardson-grade service.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Richardson
Most of the time, yes, it can be retrofitted. The gate panel itself is usually still sound; what fails is the post, the hinges, or the operator. If the post hasn’t cracked at the base, we can straighten it, pour a deeper footing, and hang the existing gate on new heavy-duty hinges with a modern LiftMaster operator. If the post has sheared or the gate panel is rusted through, replacement is cheaper than chasing welds. We’ll show you the numbers for both options before you decide. Call (626) 649-4572 and ask us to look at your gate in person.
That’s the Blackland Prairie clay cycle. Spring rains swell the clay and lift the gate posts 1 to 3 inches, so the gate drags on the concrete and the opener strains. Summer drought shrinks the clay and the posts drop back, leaving a gap at the latch side and sometimes a gate that won’t close far enough to engage the lock. Richardson sits directly on this soil, which is why a twice-yearly seasonal adjustment plan is standard practice here and almost unheard of in Plano’s sandier north sections. We can set that schedule up for you.
Your two options are a compatibility retrofit or a full operator replacement. Some older LiftMaster and Linear boards can accept a modern receiver module and photo eyes with a wiring jumper, which runs $240 to $480. Other boards are too old to retrofit safely, and you’re better off replacing the operator entirely for $640 to $1,450. We’ll test your board and show you both prices in writing. Call (626) 649-4572 to schedule a free estimate.
Yes. A commercial slide gate on a US-75 campus runs dozens of cycles a day against safety loops, vehicle detectors, and access keypads, so the operator and drive train wear at a different rate than a residential swing gate that cycles a few times a day. Commercial work also usually has to happen around business hours or after the campus clears. Our technicians carry the FAAC, DoorKing, and BFT parts that Telecom Corridor properties run, and we coordinate scheduling with your property manager.
Yes. If your gate has an opener, it should have working safety photocells. A gate that reverses on contact is the bare minimum; one that stops before it touches a kid on a bike or a dog slipping through is what actually protects your family. Richardson’s older gates often lost their photo eyes to lightning strikes or wiring damage years ago and never got them replaced. We can add a working set to almost any gate we service, usually for $140 to $260. Ask us to check yours on the next visit.
If your gate isn’t opening, dragging, or shutting down in Richardson, call (626) 649-4572 and a live person will take the call. A written estimate is free, and the technician will leave your driveway cleaner than he found it. That’s the Latch & Post standard, every visit, no exceptions.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Richardson since 2009.