Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Pompano Beach
Electric gate repair in Pompano Beach usually comes down to three things: a motor that won’t run, a board that’s corroded, or a hinge that’s seized solid. Most calls we take from Pompano Beach homeowners are scheduled the same day, and our technicians arrive with the parts needed to fix LiftMaster, Linear, Viking, Ghost Controls, and DoorKing operators on the first visit. If your gate won’t open, won’t close, or makes a grinding sound instead of moving, call (626) 649-4572 and a live person will pick up, day or night.
We know Pompano Beach gates differently than a general repair outfit would. The salt air off the Atlantic, combined with the brackish water along the Intracoastal and the canal-finger streets east of Federal Highway, corrodes gate components faster here than almost anywhere else in Broward County. That’s not a guess. It’s what we see every week, from the 33060 zip code near the beach to the HOA communities along Sample Road and Copans Road. Our Electric Gate Repair team is trained specifically for this environment, and for the older gates that dominate Pompano Beach’s housing stock.
Why Latch & Post Gate Repair Is Pompano Beach’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family, and we’ve been fixing gates since 2009. Our reputation in Pompano Beach is built on a simple routine that most gate companies never offer: a written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before the technician leaves. Those aren’t add-ons. They’re the Cedarwell C.A.R.E. values, and they matter to families with kids crawling on the floor and dogs running through the yard.
Our technicians are background-checked, uniformed, and factory-trained on the gate operators that Pompano Beach homes actually use. Whether it’s a residential Linear swing-gate opener in a canal-front yard or a DoorKing commercial operator at an HOA entrance off Copans Road, the right person shows up with the right parts. Cody Beckman leads our team, and every technician follows the same standard: explain the price before touching anything, ask before moving anything, and leave the work area cleaner than we found it. That’s the standard Pompano Beach homeowners tell their neighbors about.
Commercial Gate Operator in Pompano Beach
Commercial Gate Operator service in Pompano Beach typically covers the motor, control board, and drive assembly on shared entry gates at condominium communities, HOAs, and business properties along the Sample Road and Copans Road corridors. These systems, often running DoorKing or LiftMaster commercial operators, take a beating from daily traffic and direct salt-air exposure. When a commercial operator fails, the whole community is affected. Pompano Beach HOAs need a repair team that can diagnose the problem fast and explain clearly whether a board swap will fix it or whether the operator is too far gone to justify another repair.
Salt Air and Control Board Failures
Commercial gate boards in Pompano Beach fail earlier than manufacturers expect because of the corrosive film that settles on circuit contacts. We see blown relays, oxidized terminals, and dead display boards on operators that are only four or five years old. The fix is usually a board replacement, which on a commercial DoorKing runs between $600 and $1,800 depending on the model. We carry common boards locally, so most commercial calls in Pompano Beach don’t wait on a part to ship.
HOA and Property Manager Coordination
Property managers don’t need another vendor to chase. We coordinate directly with HOA boards and management companies in Pompano Beach, provide a written price before work begins, and document the repair so the board can approve the expense without confusion. Our 365-Day Done Right Promise covers commercial work the same as residential. If it’s not right, we make it right.
Gate Opener Repair in Pompano Beach
Gate Opener Repair in Pompano Beach is the most common call we take from homeowners, and it usually starts with a gate that hums but won’t move, or one that stopped responding to remotes and keypads. The opener is the motor and gearbox that does the physical work of swinging or sliding the gate. On older Pompano Beach properties, especially the 1950s-1970s canal-front homes east of Federal Highway, we’re often working on openers that have been exposed to salt air for a decade or more. A standard gate opener repair on a residential property in Pompano Beach runs between $180 and $450, including parts and labor.
Legacy Openers and Retrofit Decisions
Most gates in Pompano Beach were hung years ago, and the openers bolted to them are often obsolete. We look at three things before recommending a repair: the condition of the control board, the gear train, and the hinge posts. If the board is scorched from salt air and the gears are worn, a retrofit often costs more than a replacement opener. We’ll give you an honest comparison and a written price for either path.
Post-Storm Opener Strain
During hurricane season, from June through November, swing-gate arms torque and slide-gate wheels derail under sustained tropical-storm-force gusts. Openers that were already marginal fail under that stress. After a bad storm, we prioritize Pompano Beach calls where a gate won’t secure, because a gate stuck open is a real problem for kids and pets. Our crews are familiar with the post-storm surge pattern and stock up on the motors and gear assemblies that fail most.
Trusted Brands We Service in Pompano Beach
We service the gate operators that Pompano Beach families and businesses actually use. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That includes residential swing and slide gate openers, commercial operators, keypads, remote controls, safety sensors, and control boards. Because we work on these brands every day and maintain local parts stock for Pompano Beach customers, we don’t have to guess at diagnostics or order generic parts that don’t fit. The right fix happens on the first visit.
Common Electric Gate Repair Problems We See in Pompano Beach Homes
- Corroded control boards from dual salt-air exposure. Gates between the Intracoastal and Federal Highway face salt air from both the Atlantic and the brackish canals. Circuit boards oxidize years ahead of manufacturer service intervals, causing dead remotes, unresponsive keypads, and motors that won’t start.
- Seized bottom hinge pins in canal-side concrete pads. On the canal-finger streets, the bottom hinge pins sit in concrete that stays damp from canal splash and irrigation overspray. The pins rust solid within two to four years, and the gate stops moving even when the motor runs fine.
- Worn hinge posts on original wrought-iron gates. The 1950s-1970s concrete-block homes east of Federal Highway often still have their original wrought-iron driveway gates. After decades of salt air, the hinge posts shift and the gate sags, dragging on the ground and overloading the opener.
- Post-storm damage from hurricane-season gusts. Tropical-storm-force winds torque swing-gate arms, derail slide-gate wheels, and buckle aluminum panels. Gates that barely worked before June are often completely down by November.
On Pompano Beach’s canal-finger streets east of Federal Highway, the bottom hinge pins of driveway and pool-cage gates are set into concrete pads that stay permanently damp from canal splash and irrigation overspray, so they seize solid in two to four years. That’s a specific corrosion pattern and failure timeline that doesn’t occur at the same rate on gates in inland Broward cities like Coconut Creek or Margate. Our technicians carry oversized pin-extraction kits as standard equipment for these streets.
We were called out to a canal-front home off the 33062 stretch near the Intracoastal where the original wrought-iron driveway swing gate hadn’t budged in months. The bottom hinge pin was rusted into its concrete footing, the LiftMaster operator had a scorched control board from salt-air exposure, and the hinge post had shifted just enough to misalign the gate arm. We used our oversized pin-extraction kit to free the hinge, replaced the board, reset the post footing, and the gate swung clean again. That’s a classic Pompano corrosion trifecta we see weekly on these canal streets.
Pricing for Electric Gate Repair in Pompano Beach, FL
Every repair starts with a written price before we touch a single bolt. You’ll see the exact number, not a range, and you decide before work begins. That’s non-negotiable for us. Most residential gate opener repairs in Pompano Beach run between $180 and $450, depending on whether we’re replacing a control board, a gear assembly, or a hinge pin. Commercial operator repairs typically run from $600 to $1,800. A complete residential operator replacement, when the old unit is too far gone, usually lands between $950 and $2,400 for parts and labor. The final price is always quoted and agreed before any work starts. Call (626) 649-4572 for a free estimate on your Pompano Beach gate.
We Also Serve Cities Near Pompano Beach
Our Pompano Beach crews also cover Coconut Creek, Margate, Deerfield Beach, and Fort Lauderdale. If you’re in any of those cities and dealing with a gate that won’t open or an operator that’s failed, the same care routine applies: written price first, shoe covers and drop cloths on every visit, and a live person on the phone every time. You can learn more about our Electric Gate Repair in Pompano Beach service area and schedule directly.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pompano Beach
Gates in Pompano Beach fail faster because they’re exposed to salt air from the Atlantic on one side and warm, brackish water from the Intracoastal and canals on the other. That dual-exposure environment corrodes control boards, motor housings, wiring contacts, and steel hinge pins much faster than inland installations. It’s common to see a gate operator in Pompano Beach need meaningful repair or replacement after four to six years, when the same unit would last eight to ten years in Coconut Creek or Margate. Call (626) 649-4572 if your gate is aging faster than you’d expect, and we’ll tell you exactly what’s going on.
Sometimes, and it depends on the board. If the board’s outputs and motor voltage match a current replacement, a retrofit is straightforward and cheap, often $180 to $400. If the board is scorched from salt air and the geartrain is worn, we’ll recommend replacing the whole operator instead, which usually runs $950 to $2,400 for a residential unit. The decision is always made with you, in writing, before work starts. You’ll never be told a retrofit is possible when it isn’t.
Usually the gate, specifically the hinge side. On Pompano Beach’s older homes, the hinge post shifts over time, and the gate leans, dragging on the driveway and overloading the opener. The fix involves freeing the bottom hinge pin, resetting or replacing the hinge post footing, and realigning the gate. It’s a common repair in the 33060 and 33062 zip codes. We’ll diagnose the sag before we touch the operator, because fixing the opener while the post still leans is wasted money.
Hurricane season, from June through November, brings a predictable spike in gate failures. Sustained tropical-storm-force gusts torque swing-gate arms, derail slide-gate wheels, and buckle aluminum panels. Older operators with worn gears and weak hinge posts fail first. After a bad storm, we prioritize calls where a gate is stuck open, because a gate that won’t close leaves kids, pets, and the house exposed. We recommend checking your gate before the season peaks, not after the first warning.
Yes. We service commercial gate operators in Pompano Beach HOA and condominium communities, including the DoorKing and LiftMaster systems common along Sample Road and Copans Road. That includes control board replacement, motor repair, keypad and remote programming, and safety sensor work. We work directly with property managers and HOA boards, provide written pricing before any work starts, and back everything with the 365-Day Done Right Promise. For a commercial operator that’s down, call (626) 649-4572 and a live person will take the call.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Pompano Beach since 2009.