Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Inglewood, CA
Gate work in Inglewood follows the city’s own rhythm. Most of the homes here were built between the 1940s and 1960s, which means the wrought iron gates and driveway swing gates we’re called out for are often 50 to 70 years old, with rust in the hinges and posts that have shifted in the clay-heavy soil. The marine layer that sits over the city most mornings adds salt-laden humidity, so hardware corrodes faster than it does a few miles inland. When a gate won’t latch or a slide gate grinds to a stop, the cause is usually a combination of age and that coastal air. If you need a gate looked at in Inglewood, call (626) 649-4572 and a live person will answer.
Why Inglewood Homes Are Different
Inglewood’s housing stock tells the story. The post-WWII bungalows and small stucco duplexes that dominate neighborhoods like Morningside Park and North Inglewood were built with ornamental wrought iron pedestrian gates, and after six or seven decades under the marine layer, those gates are heavily oxidized. Sliding tube-steel driveway gates on 1970s and 80s apartment buildings often still run their original loop-detector or keypad operators, which are well past any reasonable service life.
The entertainment district around SoFi Stadium and the Kia Forum has changed the calculus for property owners. Landlords who deferred maintenance for years are now renovating to match rising property values and tenant expectations. We regularly see gates that haven’t moved in a decade called in as a simple tune-up, but the posts are seized and the operator is dead. That’s an Inglewood-specific pattern. A gate that sat fine through years of neglect becomes a priority when a renovated property needs to rent at a higher rate.
The salt-laden morning humidity means powder-coat and paint failure on wrought iron is chronic here. It’s not a one-time fix. We address the corrosion at the hinge and latch points, not just the visible surface rust.
Our Main Inglewood Services
Most Inglewood calls fall into one of three buckets: a gate that won’t close, a gate that was never automated but should be, or an electric operator that stopped responding. Each has its own page with the full details.
Gate Repair in Inglewood
When an Inglewood gate sags, sticks, or won’t latch, the fix usually starts at the hinges and the post. We pull the gate back into alignment, replace rusted hinges and latch hardware, and repair or re-anchor posts that have shifted. If a wrought iron gate has cracked at a weld, we grind it clean and re-weld before repainting the affected section. We lay drop cloths and wear shoe covers whenever the work takes us inside, and we can schedule around nap time if there are young kids at home. You’ll get a written price before any work begins. See the full breakdown on our Gate Repair in Inglewood page.
Gate Installation in Inglewood
A new gate in Inglewood has to work with the house it’s protecting, not against it. We install wood, wrought iron, and tube-steel gates sized and hung for the existing posts or new posts we set. On properties near the SoFi corridor, many owners are choosing modern automatic operators in place of the old manual gates that came with the 1950s bungalows. We measure, quote, and schedule the work deliberately, and every install includes the same written price and cleanup routine as a repair. Details are on our Gate Installation in Inglewood page.
Electric Gate Repair in Inglewood
Electric gate operators in Inglewood fail in predictable ways: the marine air corrodes control board contacts, loop detectors stop sensing vehicles, and remote receivers lose range. We service the brands most common in the city, including FAAC, BFT, Linear, and Viking, and we stock the boards, arms, and safety edges that keep a driveway gate operating. We test safety edges and photocells on every electric repair, not just the reason you called. We’ll explain what failed and what it costs before touching anything. Read more at Electric Gate Repair in Inglewood.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Inglewood
We’re factory-trained on the operators Inglewood homeowners and property managers actually have: FAAC, BFT, Linear, and Viking among them. We keep common boards, remotes, and safety edges in our Los Angeles parts stock, which keeps most Inglewood repairs to a single visit. See the full list on our brands page.
Pricing for Gate Company in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Gate latch replacement | $45 - $120 |
| Gate hinge replacement (pair) | $90 - $190 |
| Sagging gate realignment | $90 - $180 |
| Weld repair on wrought iron gate | $110 - $225 |
| Post reinforcement or re-anchor | $135 - $320 |
| Gate wheel or roller replacement | $75 - $165 |
| Standard automatic operator (belt or chain drive) | $650 - $1,100 |
| Piston-arm gate opener | $600 - $950 |
| Slide gate opener | $800 - $1,400 |
Corrosion from the marine layer is the biggest price driver in Inglewood. A hinge that looks simple often has rust inside the post, and that adds a weld or an anchor repair to the job. Whatever the final scope, the price is written down and agreed before we start, and it’s the price you pay.
Neighborhoods We Serve in Inglewood
We work across the entire city, from the tree-lined streets of Morningside Park to the apartment-heavy blocks near downtown and the single-family homes close to the Forum.
- Morningside Park
- North Inglewood
- Downtown Inglewood
- Hollywood Park / SoFi corridor
- Century Heights
Because we coordinate dispatch from our Los Angeles office, most Inglewood calls can be scheduled within a day or two. Emergency gate failures near the stadium corridor are typically addressed same-day when the job allows.
Service Area – Cities Near Inglewood
While this page covers Inglewood, our crews also work along the surrounding South Bay and Westside corridors. If you’re across the boundary, you can see the local detail on our pages for Hawthorne, CA, Culver City, CA, El Segundo, CA, and Lawndale, CA.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Inglewood
For emergency gate failures, we often can. A gate stuck open or a broken spring that leaves a driveway unsecured is a priority call, and we coordinate Inglewood dispatch from our Los Angeles office. Call (626) 649-4572 and a live person will tell you the earliest opening.
Most like-for-like gate repairs and replacements don’t require a permit in Inglewood, but new automatic operators or new posts may fall under city review depending on the scope. We’ll check the current requirements for your address and let you know before any work is scheduled.
Yes. Many of Inglewood’s 1970s and 80s apartment buildings have slide gates running original operators, and we repair and replace those systems regularly. We can work with property managers on tenant access, keypads, and safety edge compliance, with a written quote before anything starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco