Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Mountain View
When an electric gate stops opening in Mountain View, it’s rarely the motor. More often it’s the clay soil beneath the post, a safety sensor knocked out of alignment, or a control board confused by constant cycling. We fix those problems the same day we see them. Latch & Post Gate Repair has specialized in gates since 2009, which means we service exactly three things: the gate itself, the operator that moves it, and the access control that tells it when. We also handle Gate Installation in Mountain View when a repair isn’t the right fix. Call (626) 649-4572 and a live person answers, day or night.
Mountain View’s retrofit gates live on shallow footings in soil that moves. That’s the call pattern here, and we’re used to it. Whether you’re off Cuesta Drive with a sagging swing gate or in a complex along El Camino Real with a slide gate that runs 100 cycles a day, we know the fix before we arrive. Written price first. Shoe covers on. Cleanup photo before we leave.
Why Latch & Post Gate Repair Is Mountain View’s Preferred Electric Gate Repair Company
Mountain View homeowners call us because we treat a gate repair like work inside the house. Our uniformed techs put shoe covers on before stepping onto your property. Drop cloths go down if we’re working near a finished floor or a garage interior. We use quiet tools when kids are asleep and pet-safe lubricants where there’s a choice. That’s the Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before moving anything, Respect quiet hours, Explain the price before the work.
Every repair and installation is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print. We’ve earned our reputation in Monta Loma, Cuesta Park, and Rex Manor one gate at a time, and our Mountain View customers tend to call us back when the next rainy season shifts a post. That’s a good sign.
Mountain View response is coordinated from our San Francisco Bay Area office, with crews dispatched locally. We’re familiar with the narrow driveways, shared rights of way, and tight working spaces that define this city’s older residential blocks. It’s not another job for us; it’s a property we know how to work around.
Electric Gate Motor in Mountain View
An Electric Gate Motor in Mountain View has to handle two things this city throws at it: heavy clay soil shifting the gate it drives, and cycles counts that would embarrass a motor in most suburbs. In a typical Mountain View ranch home, a standard motor replacement runs $450-$850 depending on brand and duty rating. Most of our calls here don’t actually need a motor replacement. They need the post reset and the rack re-aligned so the motor stops fighting the gate. We’ll tell you that honestly, before we sell you anything.
Motor replacement vs. realignment
When a motor burns out, it’s usually because it’s been dragging a gate that no longer sits level. Replacing the motor without fixing the post just moves the problem six months down the road. We always check the footing first, then quote the motor only if it’s genuinely dead.
Duty-cycle matters here
On El Camino Real corridor properties with slide gates running 80-100 cycles a day, a residential-grade motor will not last. We spec duty-cycle-correct operators for that load, and we’ll explain the difference in plain terms. The right motor for a shared complex gate is not the same as the right motor for a single-family driveway in Cuesta Park.
Gate Access Control in Mountain View
Gate Access Control in Mountain View fails most often at keypads and loop detectors – especially at apartment and townhome complexes where stop-and-go traffic beats up the system daily. A keypad replacement typically runs $250-$450. Loop detector repair lands between $300-$600 depending on saw-cutting and pavement work. Homeowners in retrofit situations usually need simpler work: a keypad, a remote, or a pair of safety photocells realigned after a post moved. See our full Electric Gate Repair scope for what we handle.
Keypads and remotes
We replace worn keypads, reprogram remotes, and clean corroded contacts. If the keypad still looks fine but stopped working, we check the wire run first; many Mountain View failures are cuts from landscape work or water intrusion after winter rains.
Loop detectors and photocells
Constant traffic plus clay movement means loop detectors fail faster here than in Los Altos or Cupertino. A gate that won’t close on a car, or won’t reopen when someone walks through, usually traces back to a dead loop or a photocell knocked out of alignment by a post that moved.
Trusted Brands We Service in Mountain View
We’re factory-trained on the equipment Mountain View families and complexes actually run: LiftMaster, FAAC, BFT, and Linear, plus Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a LiftMaster slide operator in a Monta Loma retrofit and a DoorKing system at an El Camino Real apartment building have different control boards, different limits, different failure codes. We stock common parts locally, which means faster turnaround on most repairs in Mountain View – often same visit, not a week waiting for a board.
Common Electric Gate Repair Problems We See in Mountain View Homes
- Sagging swing gates at the hinge post. Older ranch-home driveways have posts set in clay that heaves every winter and settles every summer. The panel itself is usually fine; the post underneath is what failed, and we reset and re-anchor rather than replacing the whole gate.
- Slide gates dragging and jamming mid-travel. On tight lots and shared driveways where a swing gate won’t fit, slide gates are common. Seasonal soil movement tilts the post, the rack and pinion bind, and the motor draws high amps until it trips or burns.
- Motors burning out on high-cycle El Camino Real complexes. Dense renter populations with irregular shifts mean gates cycle 80-100 times daily, roughly four to five times the load of a typical suburb. We install duty-cycle-correct motors and reinforced tracks for exactly this pattern.
- Access control faults at dense complexes. Keypads and loop detectors see constant stop-and-go traffic, and photocells get knocked out of plumb by posts that shift with the soil. Our Electric Gate Repair in Mountain View service covers all of it.
Pricing for Electric Gate Repair in Mountain View, CA
Every job here starts with a written price before any work begins. You’ll see the number on paper, agree to it, and we do not start until you’re comfortable. Our Mountain View pricing: gate motor replacement $450-$850, keypad replacement $250-$450, loop detector repair $300-$600, safety sensor (photocell) replacement or realignment $150-$300, control board repair $250-$550, and post-resetting with re-anchoring $400-$900 depending on footing depth and concrete work. A site visit and estimate are free. Call (626) 649-4572 and we’ll give you exact numbers for your gate, not a vague range.
We Also Serve Cities Near Mountain View
Our Mountain View crews regularly work in Los Altos, Sunnyvale, Stanford, and Cupertino. If you’re in a neighboring city with a gate that stopped behaving, the same written-price promise, cleanup routine, and 365-Day Done Right Promise apply. Call us and we’ll tell you when we can be there.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mountain View
Your gate’s post is sitting in Santa Clara Valley clay, which expands when wet and shrinks when dry. That seasonal cycle tilts posts and throws gates out of alignment even when the original install was done correctly. The fix is a deeper, properly anchored footing, not just re-leveling the gate each year. Call (626) 649-4572 and we’ll assess the footing and quote the reset in writing before work starts.
Almost never. In Mountain View’s older ranch-home neighborhoods, the panel is usually fine and the hinge post has heaved or settled. We reset the post in a deeper footing, re-hang the gate, and realign the operator. You pay for the post work, not a full gate replacement, and the written quote reflects that.
Yes. Slide gates are the standard answer on tight shared driveways and rights of way where a swing gate would block the path or a neighbor’s access. We reset posts, re-level tracks, replace rack and pinion components, and keep the gate running while working around a single lane or pedestrian path so you never lose access during the repair.
No, it’s a duty-cycle mismatch. Gates at El Camino Real complexes with dense renter populations regularly see 80-100 cycles a day, far beyond what a residential-grade motor is built for. We install duty-cycle-correct operators and reinforce the track for that load. The result is a motor that lasts years instead of months. Estimates are free at (626) 649-4572.
Yes, and for good reason. Photocells and edge sensors exist to stop the gate if a child, a pet, or a car is in the path. A gate that closes on someone is a serious injury risk. We always verify sensor operation on every repair, and we’ll flag a non-working sensor as a required fix in our written quote if we see one.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mountain View and the surrounding South Bay with gate repair, installation, and electric gate repair since 2009.