Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Mineral Wells
Electric gate repair in Mineral Wells usually costs between $145 and $380 for common fixes like limit switch adjustments, photo-eye realignment, and hinge re-setting on ranch-style tube-steel gates. We run service calls out to Mineral Wells throughout the week, with a live person answering the phone at (626) 649-4572 around the clock. Most of the gates we repair here aren’t the ornamental iron you see in Dallas-Fort Worth suburbs 45 miles east. They’re working ranch gates on acreage, and they fail in ways that are specific to this soil and this heat. We know those failure patterns because we’ve been fixing them since 2009.
Our Electric Gate Repair team gets out to properties off FM 1821, Highway 180, and the rural routes west of the city core. If your gate won’t open, drags the ground, or the keypad stopped working after last spring’s rains, call us. We’ll quote the repair before we touch anything.
Why Latch & Post Gate Repair Is Mineral Wells’s Preferred Electric Gate Repair Company
We’re not a general handyman service that dabbles in gates. Latch & Post Gate Repair is part of the Cedarwell family of independently owned gate specialists, and we work on gate repair, gate installation, and electric gate repair only. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, whether it’s a LiftMaster solar opener on a ranch gate off a county road or a slide operator on a tight driveway near downtown Mineral Wells.
Our technicians are background-checked and uniformed, and they arrive already trained on the brands Mineral Wells families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. More important than any brand list is the routine: written price before work starts, shoe covers and drop cloths if we step inside, and a photo of the clean-up before we leave. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean. And if it isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print.
We answer calls with a live person, 24 hours a day, 7 days a week, nights and weekends and holidays included. That matters when your gate won’t close at 9:30 on a Sunday night and you’ve got dogs that need the yard fenced. Dispatch and scheduling for this area are coordinated from the brand’s Dallas-Fort Worth office, and our crews serve Mineral Wells locally.
Gate Access Control in Mineral Wells
Gate Access Control in Mineral Wells means the keypad, card reader, or intercom mounted at the entry that tells the operator to cycle the gate. On the ranch properties around this city, we see a lot of gate openers that work perfectly but the access control fails first: a keypad that went dead after a wet winter, a telephone-entry unit that stopped ringing the house phone, or a loop detector wire that pulled loose in the shifting clay. When that happens in Mineral Wells, the gate doesn’t open, even though nothing is wrong with the motor. Most access control repairs here run between $120 and $260, including the service call and the part.
Keypads and Card Readers
Weatherproofing fails first. Palo Pinto County gets hard freezes and 100-degree summers, and keypads mounted on a post at the cattle-guard entrance take the worst of both. We swap failed keypads, re-wire corroded connectors, and re-program codes while you stand right there and test it. No waiting on a call-back because the code didn’t take.
Telephone Entry and Intercom Units
These fall out of calibration. The visitor presses the button, the unit dials your house, but the audio is static or the relay won’t fire. We diagnose the board, the power supply, and the phone-line or cellular link, then replace only what’s failed. We write the price down before we order anything.
Commercial Gate Operator in Mineral Wells
Commercial Gate Operator work in Mineral Wells covers slide operators on tight commercial driveways, swing operators on ranch entries, and barrier-gate arms at small businesses and storage facilities. A gate that stops mid-cycle at a commercial property isn’t just inconvenient. It means a delivery truck can’t get in, an employee can’t leave, or a fire lane gets blocked. Most commercial operator repairs in this area run between $280 and $650, depending on whether it’s a limit switch, a control board, a drive chain, or a full operator head. Smaller adjustments come in lower; a failed board on a Slide operator is the higher end.
Slide Gate Operators on Tight Driveways
Commercial and rural-residential properties in Mineral Wells often use slide gates because there’s no room for a swing gate to arc across the driveway. Track gets clogged with caliche gravel. Rollers wear. Limit switches drift. We service the drive train, the track, and the operator head, and we get the gate cycling again the same day if the part is on the truck.
Barrier Arms and Loop Detectors
Loop detectors buried in the driveway are the first thing that fails after a wet winter here. The trench settles, the wire stretches, and the detector stops sending a signal, so the arm won’t lift for a car. We locate the break, splice it, and re-tune the detector. If the loop is destroyed, we cut and pour a new one. Same-day for most loops under 40 feet.
Trusted Brands We Service in Mineral Wells
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The ones we see most often on Mineral Wells acreage are LiftMaster solar operators on tube-steel swing gates, FAAC hydraulic operators on heavier commercial entries, and Linear chain-drive slides on the tighter driveways. We keep common repair parts for those brands stocked locally so a routine fix doesn’t mean waiting a week for a shipment. If your operator is from a brand you don’t see in your manual, call us and we’ll verify before we come out. We don’t guess about compatibility.
Common Electric Gate Repair Problems We See in Mineral Wells Homes
- Gates that drag the ground by early summer. Clay-heavy Palo Pinto soil expands after wet springs, heaving cedar posts upward and throwing the gate panel off-level. The operator arm stalls mid-travel because it’s fighting the bind, not because the motor is weak.
- Photo-eyes that trip for no visible reason. The post shifted seasonally, so the photo-eye beam no longer lines up with its reflector across the lane. The gate thinks something is in the path and reverses every time. Re-aiming the eyes usually fixes it that visit.
- Keypads and loop wires that die after a wet winter. The ground swells, trench conduit flexes, and salt or moisture gets into the keypad enclosure. The operator still has power, but the open command never arrives.
- Weld-joint failure at the operator arm mount. Bare steel pipe gates rust in the summer heat, and the weakest point is where the operator arm bolts to the gate frame. That weld cracks, the arm twists, and the gate stops halfway.
Pricing for Electric Gate Repair in Mineral Wells, TX
Here’s what you should expect to pay for electric gate repair in Mineral Wells. Limit switch adjustment: $95 to $165. Photo-eye realignment or replacement: $110 to $190. Keypad replacement: $130 to $240. Control board replacement: $220 to $410. Operator arm replacement: $185 to $350. Full slide or swing operator replacement lands higher, between $1,200 and $2,800, depending on the gate’s weight and length. These are the numbers we quote in writing before any work starts. You see the exact figure, you approve it, we do the job. Free estimates, no pressure. Call (626) 649-4572 and we’ll get you a number.
We Also Serve Cities Near Mineral Wells
Our electric gate repair coverage reaches Mineral Wells and the surrounding communities of Weatherford, Springtown, Aledo, and Azle. If you’re just outside the city on a county road, we’ll still come out. Give us a call and we’ll confirm the schedule.
Serving Mineral Wells, TX - Our Local Coverage Area
We’re based in the Mineral Wells area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mineral Wells
Because the cedar hinge posts are set in Palo Pinto County’s shrink-swell clay, and that clay heaves when it absorbs spring rain. The post lifts, the gate panel tilts, and the latch side drags by June. We re-set the post, re-plumb the hinge, and correct the sag, then re-aim the photo-eyes and reset the limit switches so the operator arm isn’t fighting the bind. This same property often calls us twice in a single year, once after a wet spring and again after the ground dries out. Call (626) 649-4572 for an exact quote on a re-set, and we’ll tell you what we’d re-use and what needs replacing.
Yes. That’s most of what we do in Mineral Wells. The heavy tube-steel swing gates you see on acreage lots take a different operator than a suburban ornamental gate, and they fail differently too: the arm mount weld cracks, the hinge posts lean, and the solar panels undercharge in the winter. We repair all of it, including the panel, the battery, the arm, and the gate frame itself. We’re trained on LiftMaster, FAAC, and BFT operators specifically, and we carry common repair parts for those brands. Call (626) 649-4572 for a written estimate.
Yes, and we work on a lot of them. Near downtown Mineral Wells and around the older Camp Wolters-area streets, driveways run tight, and a slide gate is often the only way to secure the property. We service the operator head, the track, the rollers, and the limit switches. The most common issue in this area is crushed rock or caliche gravel wedged in the track, which we clear and re-lubricate. A slide operator service call in Mineral Wells typically runs $125 to $210. Call (626) 649-4572 for an exact quote.
Yes. UL 325 entrapment protection standards apply in Texas, and every automatic gate operator must have a functioning primary entrapment sensor (like a safety photocell or edge sensor) and a secondary means of reversal. If your gate reverses on its own in the middle of the cycle, that’s often the photo-eye or edge sensor working correctly while the limit switch is misaligned. We test entrapment protection on every repair visit and we will not bypass a sensor to make the gate stay closed. That’s a safety issue, especially on properties with kids and pets. Call (626) 649-4572 and we’ll test everything while we’re there.
Usually, yes. For a swing gate, we can often chain it open and disconnect the operator arm while we re-set a post or replace a board, so you still have driveway access for vehicles and pedestrians. For a slide gate, we can roll it open and secure it, then return it to service the same day in most cases. We’ll tell you exactly how long the gate will stay down before we start, and we schedule the work so your driveway isn’t blocked overnight unless it’s already non-functional. Call (626) 649-4572 and we’ll walk you through what to expect for your specific gate.
Repair pricing in Mineral Wells runs about $10 to $30 lower on average than the same repair in Weatherford or Azle, mostly because the drive distance is shorter for many of our technicians and the gate types here are simpler: tube-steel ranch gates with surface-mounted operators instead of custom ornamental iron with concealed hardware. A limit switch adjustment that runs $120 in Azle might run $105 in Mineral Wells. It’s not a big difference, but you’ll see the exact figure in writing before we do anything. Call (626) 649-4572 for a free estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Mineral Wells since 2009.