Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across McKinney
Electric gate repair in McKinney usually comes down to two things: the operator that moves the gate and the power feeding it. On the city’s north and east acreage fringes, that power often isn’t a 120V line at all. It’s a solar array and a 24V battery bank that has to work through black clay soil movement, ice storms, and Texas sun. Our Electric Gate Repair team handles the whole system, operator and power supply alike, and we answer the phone live at (626) 649-4572.
We work all over McKinney, from Stonebridge Ranch and Craig Ranch out to the gravel driveways off FM 1461 and New Hope Road. Founded in 2009 as part of the Cedarwell family, Latch & Post Gate Repair is led by Cody Beckman. Every job gets a written price before work starts, a technician in shoe covers and drop cloths inside your home, and a cleanup photo before we leave. That’s standard on every visit, not an add-on.
Why Latch & Post Gate Repair Is McKinney’s Preferred Electric Gate Repair Company
McKinney homeowners call us because we understand the two very different gate worlds this city contains. Ten minutes from the HOA iron gates of Stonebridge Ranch, we’re standing at a welded-pipe ag entrance with a solar panel on a T-post. Most gate companies know one of those worlds. We work both every week, and we stock parts for Viking, Ghost Controls, DoorKing, and Elite operators so we’re not waiting on a distributor when a storm has already left your gate stuck open.
The crews that come to McKinney are background-checked and uniformed, trained under the Cedarwell C.A.R.E. values: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. When we step inside a McKinney home to check a keypad or intercom, we’re wearing shoe covers over the floor you just had cleaned. If your kids are napping, we use quiet tools. That’s not a special request. That’s the routine.
Our 365-Day Done Right Promise covers every repair and installation. If it’s not right, we come back and make it right, no argument and no fine print. And when you call Latch & Post in McKinney, a live person picks up, 24 hours a day, including weekends and holidays. No voicemail tree, no callback queue.
Electric Gate Motor in McKinney
Electric gate motor repair in McKinney is a power and span problem before it’s a brand problem. An operator has to be sized to the actual weight and length of your gate panel, not just the label in a catalog. When a Viking or Ghost Controls motor burns out in McKinney, the cause is usually an undersized unit on a heavy ag gate, or a panel that’s been fighting drifted footings for too long before the motor finally quit. Our gate motor repair runs on the operator and drive hardware itself: diagnosis, replacement, torque and limit adjustment.
Sizing a Motor to the Gate, Not the Franchise Catalog
We see this on McKinney’s acreage east of Lake Forest Drive and up toward Blue Ridge. A long farm-style swing gate, 16 feet of welded tube and cedar, gets a homeowner-grade opener because it was on sale. The motor strains, the draw spikes, and it burns out in two summers. We measure panel weight and span, then match the operator honestly. If the motor is salvageable, we repair it. If it’s too small for the job, we say so and quote a proper replacement.
Operators Pulled Out of Alignment by Moving Clay
Collin County black clay swells and shrinks every season. When the post footing heaves, the gate drifts and the operator’s gearbox takes the load. We re-plumb the post, shim and re-bolt the operator mount, and reset the travel limits so the motor isn’t working against the soil. On hollow brick columns in HOAs, that sometimes means coordinating a mason to re-core the column before we touch the hardware. We arrange that coordination, which is not something every fence-and-gate shop in McKinney is set up to do.
Gate Access Control in McKinney
Gate access control in McKinney means more than the keypad by the front gate. For acreage properties and gated driveways, it’s the whole line from the entrance keypad or card reader, through the control board in the operator, out to the safety sensors at the gate opening and the vehicle exit loop in the ground. We repair, replace, and rewire every part of that line, and we make sure the system still works when the power source is solar and battery, not mains.
Keypads, Remotes, and Vehicle Sensors on Long Driveways
On a 300-foot driveway off New Hope Road, the problem is often not the keypad itself. It’s a photo-eye that lost alignment after a freeze, or an exit loop that was severed when a section of gravel drive got graded. We test each part of the chain before we replace anything. Keypad and remote repair includes reprogramming to the existing board where possible, so you’re not replacing a working brain just because a fob stopped learning.
What It Costs to Repair Access Control
Access control repair in McKinney typically runs $160 to $390 for keypad, remote, and safety sensor work. Control board replacement is the pricier job, usually $420 to $780 depending on the operator brand and board generation. You’ll get an exact written number before any work starts, and that number doesn’t change unless you ask for additional scope.
Trusted Brands We Service in McKinney
Our technicians are factory-trained on the brands McKinney acreage properties actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common boards, remotes, photo-eyes, and drive components in our local stock, so a Gate Motor Repair on a Viking or a DoorKing operator doesn’t wait on a national distributor. We also match parts to the existing system rather than pushing a full panel swap when a single board or limit switch is the real problem.
Common Electric Gate Repair Problems We See in McKinney Homes
- Solar battery banks that quit after a cloudy stretch. A gate that cycled fine all summer stalls in February because the batteries lost capacity over an extended overcast spell and never recovered. We test the bank, replace cells in matched sets, and re-run current draw against the operator’s manual.
- Gates drifting out of plumb after heavy rain. The black clay soaks up water, swells, and heaves the post footing. The swing gate binds, the motor strains, and the limit switches lose their reference. We re-set the post, then re-set the limits.
- Undersized operators on heavy ag entrances. A farm gate built for a tractor gets a light residential motor. The rack and pinion strips or the gearbox fails. We size the replacement to the actual panel weight and span.
- Photo-eyes and safety sensors damaged by ice. Ice seizes operator motors and cracks sensor housings that sit exposed at the gate line. The system enters failsafe and refuses to close. We replace the sensors and check the board for damage before it cascades.
Pricing for Electric Gate Repair in McKinney, TX
Electric gate repair in McKinney runs from about $180 to $260 for a basic sensor, keypad, or remote repair. Gate motor repair typically lands between $320 and $580 depending on the motor, gearbox, or drive component. Full control board replacement is $420 to $780. A complete operator swap on a heavy ag gate, including the motor, control board, and drive hardware, typically runs $1,100 to $2,400. You’ll see the exact number in writing before we touch anything, and we never start work without your approval of that written price.
Most standard gate motor repairs on McKinney acreage properties run between $340 and $540 once the panel weight and power source are confirmed, and keypad service on a gated driveway typically lands between $140 and $220. There’s no charge to have us look at the gate and give you a straight number.
We Also Serve Cities Near McKinney
Our crews also serve Melissa and Anna to the north, Princeton to the east, and Allen to the south. If your property sits on the line between McKinney and one of those towns, call us and we’ll confirm coverage directly. We know the gravel drives and the soil conditions across this whole stretch of Collin County.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in McKinney
Yes. Most rural electric gates in McKinney run on solar arrays and 12V or 24V battery banks, and we repair those systems every week. The problem is almost always the batteries or the charge controller, not the operator. We test the bank, replace drained cells in matched sets, and re-tune the panel angle and controller settings so the gate cycles through cloudy stretches.
If the motor is still functioning but the panel is too heavy, the question is whether the drive can be converted rather than scrapped. We measure the actual panel weight and span, check the drive type, and either rebuild the motor for a realistic duty cycle or quote a properly sized replacement. In most cases, an undersized motor on a heavy ag gate has already damaged the gearbox or drive, and the honest fix is a correctly sized operator.
Because your post footings are sitting in expansive black clay that swells when wet and shrinks when dry, so the post heaves and the gate drifts every season. This is the single most common soil-related failure we see on McKinney acreage driveways. The fix is a re-plumb of the post, and on masonry columns sometimes a mason re-core before the gate hardware is re-aligned.
Ice expanded inside or around the sensor housing and either cracked the lens or pushed the photo-eye out of its bracket alignment. On solar systems, a frozen battery bank can also pull the power low enough that the sensor reads a fault and sends a failsafe close. We replace the sensor and test the board and power supply before calling the job done.
Yes. We handle the full access line on working gates, from the keypad and card reader to the control board, safety edges, exit loops, and intercom. For livestock entrances, we configure the auto-close timing and safety inputs so the gate doesn’t close on a trailer or a slow-moving animal. Call (626) 649-4572 for a specific answer about your gate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving McKinney since 2009.
Need electric gate repair in McKinney? Call (626) 649-4572 for a free estimate. We’ll give you a straight written price and leave your floors clean.