Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lighthouse Point
When an electric gate stops cooperating in Lighthouse Point, you don’t want a technician who’s learning the neighborhood on the way over. You want someone who already knows that a gate on Sample Road faces different stress than one on a canal off the Intracoastal. That’s the kind of local understanding our Electric Gate Repair team brings to every job. We service Lighthouse Point homes with a focus on the heavy, ornamental gates this city is known for. Call (626) 649-4572 and you’ll get a live person, not a recording, any hour of the day or night.
Why Latch & Post Gate Repair Is Lighthouse Point’s Preferred Electric Gate Repair Company
Homeowners in Lighthouse Point tend to notice the details. They notice when a technician shows up in a clean uniform, puts shoe covers on before stepping inside to check an intercom panel, and lays a drop cloth down before opening a gate motor housing. They notice when the tech asks before moving a planter or adjusting a sensor near the driveway. That’s the Cedarwell C.A.R.E. routine: Clean up like it’s our own home, Ask before touching anything, Respect the family’s time and quiet hours, and Explain the price before the work. We’ve been doing it this way since 2009.
We’re factory-trained on the brands families actually have in this city: LiftMaster, FAAC, Viking, and Ghost Controls among them. When a Lighthouse Point customer calls about a swing gate that’s sagging or an opener that hums but won’t move, we already know the likely culprit. And every job, from a keypad repair to a full motor replacement, carries the 365-Day Done Right Promise. If it isn’t right, we make it right. No argument, no fine print.
Led by Cody Beckman, our crews are dispatched from our South FL office and serve Lighthouse Point locally, so the technician who arrives understands what salt air does to gate hardware here. That matters more than most people realize until the second or third repair on the same gate.
Electric Gate Motor in Lighthouse Point
Electric Gate Motor work in Lighthouse Point is almost always a corrosion story rather than a simple wear story. The motors on canal-facing properties sit in a salt-mist microclimate that accelerates oxidation far faster than a motor on an inland lot ever experiences. When a Lighthouse Point homeowner’s gate groans, hesitates, or refuses to move, it’s often because moisture has worked its way into the operator housing or the motor’s internal contacts have corroded. Replacing a gate motor on a standard single swing gate in Lighthouse Point typically runs $850-$1,400, depending on the operator type and whether the mounting plate and wiring need attention too.
Signs Your Gate Motor Is Failing
A motor that hums without moving is usually a capacitor or gear failure, both common after years in salt air. A motor that trips its breaker every time it cycles often has moisture in the circuit board. We see both regularly on older Lighthouse Point installations, especially on gates built in the 1970s and 1980s that still have their original operators.
What Replacement Includes
We remove the old operator, inspect the mounting surface for corrosion, replace any compromised bolts or brackets, install the new motor, and run a full open-close cycle test. If you have kids or pets, we can schedule around nap time and use quiet tools so the house stays calm. Before any work begins, you’ll see a written price, and you’ll see the final number before you pay. That’s how every Latch & Post visit works.
Gate Access Control in Lighthouse Point
Gate Access Control covers the systems that decide who gets through: keypads, remote receivers, intercom panels, vehicle sensors, and the control boards that tie them all together. In Lighthouse Point, these components sit vulnerable to the same salt air that eats through hinges. A keypad that stops responding after a summer of afternoon thunderstorms has likely suffered moisture intrusion. A control board that resets randomly is often showing early corrosion on its terminals. Gate access control repair in Lighthouse Point typically runs $180-$650, depending on whether we’re replacing a single remote receiver or an entire circuit board.
Keypad and Intercom Repairs
We repair and replace keypads for Viking, DoorKing, and Elite systems, the brands most common on Lighthouse Point’s custom gates. If your intercom audio is crackling or the keypad won’t accept the code your kids know by heart, we start by checking for water entry at the mounting seal and corrosion at the wiring connections.
Control Board Diagnostics
Before recommending a replacement board, we test the whole signal path: the remote, the receiver, the safety sensors, and the power supply. In canal-heavy neighborhoods like the Venetian Isles, we often find that a “dead board” is actually a live board with corroded ground connections. Fixing that costs less than a new board and is the kind of correct diagnosis that saves you real money.
Trusted Brands We Service in Lighthouse Point
We’re factory-trained on the operators and access systems installed in Lighthouse Point’s high-end homes: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When you call about a DoorKing slide gate on a canal lot or a Viking keypad that’s gone dark, we know the wiring diagrams and common failure points without opening a manual on your driveway. We keep common parts stocked for quick turnaround, so a Phantom-style swing gate operator that needs a new control board isn’t down for a week while we order parts. Most repairs are completed in one visit.
Common Electric Gate Repair Problems We See in Lighthouse Point Homes
- Canal-facing gates corroding through standard steel hinges in 18 to 24 months. Lighthouse Point’s canal-saturated geography means salt mist reaches nearly every property, not just waterfront estates. A gate that’s starting to sag or drag is usually telling you a hinge has thinned and is about to fail.
- Gate operator circuit boards shorting after afternoon thunderstorms. South Florida’s summer pattern of humidity, heat, and sudden downpours pushes moisture into operator housings. Intermittent failures that come and go with the weather are a classic Lighthouse Point control board issue.
- Bent gate arms and cracked post footings from hurricane-season winds. Automated arms absorb a lot of force during tropical storms, especially if the gate wasn’t disconnected or secured. We see bent arms and loosened posts on homes throughout Lighthouse Point after every major storm season.
- Original 1970s and 1980s gate hardware never spec’d for coastal exposure. Many of Lighthouse Point’s upscale homes were built with ornamental iron gates and operators that were fine for inland use but stand little chance against decades of salt air. Full motor and hinge replacement is common rather than exceptional here.
Pricing for Electric Gate Repair in Lighthouse Point, FL
A standard gate latch replacement in Lighthouse Point runs $120-$280, and you’ll see the exact number in writing before we touch anything. Hinge replacement, the most common corrosion-driven repair on canal-facing properties, typically costs $300-$800 depending on the gate’s weight and whether we’re replacing one hinge or a full set. Gate motors run $850-$1,400 installed. Access control repairs range from $180-$650. Full operator and access system replacements on large ornamental gates can reach $2,000-$4,500. Every quote is written, every price is agreed before work starts, and there’s no pressure to accept. Call (626) 649-4572 for a free estimate, and we’ll walk you through what your specific gate needs.
We Also Serve Cities Near Lighthouse Point
Our Electric Gate Repair in Lighthouse Point service area extends to nearby communities, including Jacksonville, Miami, Tampa, and Orlando. If your property sits just outside Lighthouse Point, we can still help. Call (626) 649-4572 and mention your location so we can coordinate the fastest response for your gate.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lighthouse Point
Canal-facing gates in Lighthouse Point typically need hinge replacement every 18 to 24 months if the existing hinges are standard steel. That’s not normal wear, it’s salt-air corrosion. We recommend marine-grade stainless steel or hot-dipped galvanized hardware on every canal-facing gate, which extends hinge life to five years or more. If your gate is sagging or scraping, call (626) 649-4572 and we’ll inspect it before it fails completely.
Yes, it’s one of the most common calls we get in Lighthouse Point, especially from homes on the canal network. Moisture intrusion into the operator housing or control board is the usual cause, and the fix often involves sealing the housing, cleaning the board, and replacing any corroded terminals. Sometimes a new board is needed. We’ll tell you what’s actually wrong and show you the written price before any part is ordered. Estimates are free.
Before hurricane season, check that your gate opens and closes smoothly without hesitation, listen for grinding or clicking from the motor, and look for rust streaks on hinges and mounting posts. The most important step is knowing how to disconnect your operator so the gate can move freely in high wind. We can show you how to do this safely and can retrofit older installations with proper storm preparation hardware. Call us before June and we’ll make sure your gate is ready.
Yes. We service LiftMaster and FAAC operators on the original gates installed during Lighthouse Point’s 1960s through 1990s building boom. These older operators were not spec’d for continuous coastal salt exposure, so we frequently replace or rebuild them with components rated for marine environments. We are factory-trained on both brands and keep common replacement parts in stock for faster service.
A gate that sags on the latch side usually has a worn hinge or a hinge post that has corroded at the base. If the post itself is failing, tightening the hinges won’t help, you need a new post. Our tech serviced a LiftMaster swing gate operator on a canal-front property in the Venetian Isles neighborhood where the original steel hinge post had corroded entirely through at the base, causing a 3-inch sag. We replaced the hinge post with hot-dipped galvanized steel, installed marine-grade stainless hinges, and corrected the sag at the post, not just the panel, so the gate ran silently for years despite daily salt exposure. Call (626) 649-4572 and we’ll diagnose yours the same way.
Contact Latch & Post Gate Repair in Lighthouse Point
If your electric gate is struggling, call (626) 649-4572 for a free estimate. We’ll send a background-checked, uniformed technician who knows Lighthouse Point’s gates, streets, and salt-air challenges. You’ll get a written price before work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave. Our 365-Day Done Right Promise covers every repair, and a live person answers the phone 24 hours a day.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lighthouse Point with gate repair, installation, and electric gate repair since 2009.