Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Leesburg
Electric gate repair in Leesburg usually means one of two things: a community entrance gate that won’t open, or a driveway gate that’s sagging, grinding, or dead after a storm. Most of our Leesburg calls are for sliding gates on tight lot lines and aging swing gates on 55+ HOA entrances, and we carry parts for the older Linear, FAAC, and BFT operators still running in Plantation at Leesburg and Royal Highlands. We coordinate dispatch from our South FL office and send crews directly to Leesburg, usually within one business day for non-emergency issues. If a gate is stuck open or won’t close and secure the property, call (626) 649-4572 and a live person answers, day or night.
Key Takeaways
- Leesburg’s 55+ HOA entrance gates often run on discontinued Linear and HySecurity operators from the 1990s, which need reverse-engineering rather than simple part swaps.
- Harris Chain of Lakes humidity rusts hinges, pivot pins, and gate frames faster here than in inland Central Florida cities.
- Summer thunderstorm surges fry gate operator control boards regularly from June through September.
- We provide a written price before any work starts, and every repair is covered by the 365-Day Done Right Promise.
Why Latch & Post Gate Repair Is Leesburg’s Preferred Electric Gate Repair Company
Leesburg is not like the newer Lake County suburbs. Gates here are older, often original to 1990s-era communities, and they carry the wear of two or three decades of daily cycles in high humidity. Our Electric Gate Repair team knows the operators that show up at Plantation at Leesburg, Highland Lakes, and Arlington Ridge, and we keep a local stock of compatible boards, safety photocells, and loop detector parts so we don’t lose a day waiting on a generic warehouse shipment.
Every technician who arrives at a Leesburg home or HOA entrance is background-checked, uniformed, and trained on LiftMaster, FAAC, BFT, and Linear systems. We put shoe covers on before stepping into an entry or garage, lay drop cloths anywhere we work indoors, and send a photo of the cleanup before we leave. That’s part of the Cedarwell C.A.R.E. values, and it’s not an upsell. When Cody Beckman took over the Latch & Post team, the directive was simple: treat every gate like it leads to your own home.
Gate Access Control in Leesburg
Gate Access Control in Leesburg is the system that decides who gets in: the keypad, the telephone-entry unit, the vehicle loop detector, and the control board that ties them together. In communities like Plantation at Leesburg and Royal Highlands, these systems run hundreds of vehicle cycles a day, and many are still running on original mid-1990s boards that manufacturers have quietly discontinued. When a board fails, a homeowner or HOA manager is left with a gate that won’t respond to a code, a call box that rings to nowhere, or a loop detector that won’t sense a waiting car.
We repair what’s there first, and upgrade only when the system is truly past saving. A keypad replacement in Leesburg typically runs $225 to $450 installed. A telephone-entry repair is usually $180 to $380 depending on the panel. A full access-control board replacement for an older Linear or FAAC operator runs $600 to $1,200 including reprogramming and testing. You’ll see the exact number in writing before we touch anything.
HOA Entrance Keypad and Call Box Work
Most Leesburg HOA entrances have two or three layers of access: a keypad for residents, a call box for visitors, and sometimes a remote receiver for fire or delivery access. We test all of them after any repair, because fixing the keypad while leaving the call box dead is not a repair. It’s half a repair.
Loop Detector and Vehicle Sensing
Vehicle loop detectors are the buried wire loops that tell the gate a car is waiting. In Leesburg’s sandy, shifting soils and heavy rain, loop wires break and connections corrode. We re-terminate leads, replace damaged loops where needed, and reset sensitivity so the gate doesn’t close on a resident’s car, and doesn’t sit open for fifteen seconds with nobody there.
Commercial Gate Operator in Leesburg
A Commercial Gate Operator in Leesburg is the motor and drive unit that physically moves the gate. The term covers slide gate operators, swing gate operators, and the older HySecurity and Linear units still doing daily duty at community entrances. In tight spots, shared driveways and narrow rights of way in Plantation at Leesburg and Royal Highlands leave little room for a swing gate to travel, so many communities run slide gates. Those slide gates depend on precise rack and pinion alignment, and when that alignment drifts, the gate shudders, jams, or strips a gear.
Operator repair in Leesburg typically runs $325 to $850 depending on the motor style and what’s failed. A full operator replacement, common when an original 1990s unit finally goes, runs $1,400 to $2,800 installed, including setting the travel limits, aligning the rack, and testing safety photocells. We quote the complete job up front so the HOA board sees the exact number before any work begins.
Slide Gate Rack and Pinion Correction
Slide gates work on a gear that drives along a toothed rack, and in Leesburg’s humidity, that rack rusts and the gear loses bite. We correct alignment, replace worn rack sections where the original is too pitted to hold, and set the end limits so the gate stops fully open and fully closed without slamming.
Safety Photocell and Edge Replacement
Commercial operators must stop and reverse if a car, pedestrian, or pet is in the path. The safety photocells and reversing edges are what make that happen, and in Leesburg they get coated in pollen, hit by lightning-surge damage, and knocked out of alignment in tight installation spaces. We test every safety circuit after a repair. Nobody leaves a gate that won’t reverse.
Trusted Brands We Service in Leesburg
We service FAAC, BFT, and Linear operators most often in Leesburg, along with LiftMaster, Viking, DoorKing, Elite, and Mighty Mule equipment. The important thing for Leesburg customers is that we know which of these brands have discontinued older boards, and we source compatible replacements rather than shrugging and saying the parts don’t exist. For the legacy Linear and HySecurity units still running at Plantation at Leesburg and Royal Highlands, that knowledge is the difference between a repair this week and a dead gate for a month.
Common Electric Gate Repair Problems We See in Leesburg Homes
- Surge-fried control boards after summer storms. From June through September, afternoon lightning strikes regularly take out gate operator boards. On older Linear units, the board is often discontinued, so the repair means sourcing a compatible aftermarket board and re-terminating the loop detector and keypad wiring.
- Hinge post rust and sag at the post, not the panel. Harris Chain of Lakes humidity sends moisture into hinge posts and pivot pins. They corrode from the inside, and the gate starts dragging at the latch post while the panel itself looks fine. This is a footing and hinge repair, not a panel adjustment.
- Slide gate alignment drift on tight shared driveways. In Plantation at Leesburg and Royal Highlands, slide gates run in restricted rights of way. Rack and pinion alignment drifts over time, the gate shudders or binds, and residents have to jockey the gate with a remote.
- Safety photocell failures that disable the gate entirely. Most modern operators will not run at all when a safety photocell is misaligned or dead. In Leesburg’s tight entrance lanes, the photocells get bumped by mowers, knocked by delivery trucks, and coated with pollen, then the gate refuses to close for no obvious reason.
Pricing for Electric Gate Repair in Leesburg, FL
Most electric gate repairs in Leesburg run between $180 and $850 depending on what’s failed. Keypad and remote programming is on the lower end at $95 to $225. A safety photocell replacement is typically $180 to $320. Gate motor repair, including a rebuilt or compatible board, runs $325 to $700. A full operator replacement for a single-family driveway gate is $1,100 to $2,400, and a commercial slide gate operator replacement at an HOA entrance is $1,400 to $2,800. What changes the number is whether we’re repairing a current-production part or sourcing a compatible replacement for a discontinued board, and whether the gate post footing or rack alignment is also compromised. Every Leesburg repair includes a written price before work starts, and the 365-Day Done Right Promise covers the work. Call (626) 649-4572 for an exact quote, free, no pressure to accept.
We Also Serve Cities Near Leesburg
Latch & Post sends crews to communities around Leesburg every week, including Electric Gate Repair in Leesburg and the nearby cities of Fruitland Park, Lady Lake, Tavares, and Eustis. If your gate is in one of those areas, the same written-price policy, C.A.R.E. cleanup routine, and 365-Day Done Right Promise apply.
Serving Leesburg, FL - Our Local Coverage Area
We’re based in the Leesburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Leesburg
Yes, in most cases. The older Linear operators installed in the 1990s are discontinued by the manufacturer, but compatible aftermarket control boards and rebuilt motor components are still available through specialized suppliers. We diagnose the specific failure first, then match a compatible replacement and test the full access-control system, including loop detectors and safety photocells. Call (626) 649-4572 to schedule a diagnostic visit and we’ll give you a written price before any repair begins.
Leesburg sits in the Harris Chain of Lakes basin, which keeps ambient humidity unusually high year-round. That constant moisture gets into hinge posts, pivot pins, and wrought-iron gate frames, and the corrosion happens from the inside out. A gate that looks straight on the outside may have a hinge post rusted at the footing, which is why we correct the post footing and re-level the gate instead of just patching the panel.
The control board usually fails first, because the surge travels through the power line and the loop detector leads directly into the board. The motor itself often survives. In Leesburg, June through September is when we see this most, and on older Linear and HySecurity units the board is typically discontinued. We source compatible replacements and re-terminate all field wiring before powering the system back up. For an exact repair quote after a surge, call (626) 649-4572.
Yes. Slide gates are the standard solution for Leesburg communities with restricted rights of way, and we repair them without blocking resident vehicle or pedestrian access during the work. The most common failure in tight spaces is rack and pinion misalignment, and we correct that on site. We also reposition safety photocells within the available space so the gate still meets reversing requirements. Call (626) 649-4572 for a free repair estimate.
Yes. We service commercial gate operators and full access-control systems at 55+ HOA entrances throughout Leesburg, including Royal Highlands, Arlington Ridge, Highland Lakes, and Plantation at Leesburg. That includes telephone-entry units, keypads, loop detectors, safety photocells, and the operators themselves. Every commercial repair receives a written quote before work begins, and the 365-Day Done Right Promise applies. Call (626) 649-4572 to schedule service.
Call for a Free Electric Gate Repair Estimate in Leesburg
If your gate is grinding, dead, stuck open, or throwing an error after a storm, call (626) 649-4572. A live person answers 24 hours a day, seven days a week. We’ll schedule a visit, diagnose the problem, and hand you a written price before any work starts. Every Leesburg repair includes shoe covers, drop cloths where needed, a cleanup photo, and the 365-Day Done Right Promise: if it isn’t right, Latch & Post makes it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair. Latch & Post is a Cedarwell-family gate specialist serving Leesburg, FL and the surrounding Lake County communities.





Before
After
Before
After
Before
After