Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lake Park
An electric gate in Lake Park that won’t open, grinds mid-cycle, or trips its breaker is usually one of three things: a motor that’s done, a board that took a surge, or a hinge post that’s quietly rusting out. We fix all three, often on the first visit. Most electric gate repairs in Lake Park run $240 to $680 depending on what actually failed, and you’ll see the exact number in writing before we touch anything. Call (626) 649-4572 and a live person answers, any hour.
Why Latch & Post Gate Repair Is Lake Park’s Preferred Electric Gate Repair Company
We work the lagoon-side blocks and the ranch-home streets of Lake Park often enough to know what fails first out here, and it’s rarely the part a parts catalog would predict. We’re a Cedarwell-family gate specialist, not a general handyman. Our techs are background-checked and uniformed, and we follow a care routine most gate companies never mention: shoe covers and drop cloths on every visit, a written price before work begins, and a photo of the clean-up before we leave. Every repair and installation is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right. No argument, no fine print.
We answer live, around the clock. A gate stuck open at 9 p.m. in Lake Park is a safety issue, and nobody should leave a voicemail about it. Dispatch and scheduling are coordinated from our Miami (South FL) office, and our crews serve Lake Park locally.
Electric Gate Motor in Lake Park
An Electric Gate Motor in Lake Park lives a harder life than the same motor ten miles inland. Salt spray off the Lake Worth Lagoon works its way into the housing, and within two or three summers the armature and limit switches are fighting corrosion the manufacturer never designed for. We replace motors with marine-rated or sealed units, and we always check what killed the old one first, because a new motor bolted onto a corroded mount is just a future service call. Most gate motor replacements in Lake Park run $380 to $740, including labor and the written quote before we start.
Corrosion-Protected Motor Replacement
On lagoon-facing properties off Park Avenue and Lakeshore Drive, we spec sealed enclosures and stainless mounting hardware as standard. A standard residential operator near the Intracoastal often fails in 18 to 24 months. The marine-rated enclosure is what gets it past year five.
Noisy Motor and Slow Swing Diagnosis
A motor that groans on every cycle is usually telling you about the hinge side, not the motor. On Lake Park’s mid-century swing gates, rusted hinge pins and tired posts force the motor to pull harder than it should. We diagnose the whole path, not just the motor.
Gate Access Control in Lake Park
Gate Access Control in Lake Park means keypads, remote receivers, loop detectors, and the control board that ties them together. Salt air here doesn’t just eat metal; it creates conductive pathways across circuit boards and shorts them after a storm-driven humidity spike. We see it constantly on homes within a few blocks of the Intracoastal. Keypad and receiver repairs in Lake Park typically run $160 to $420, and control board replacements run $250 to $550 depending on the brand and protection level you’re willing to install.
Sealed Control Board Enclosures
Summertime in Lake Park brings thunderstorms that roll in off the Atlantic and the lagoon. Each surge isn’t always dramatic; sometimes it just shaves away the board’s integrity until a humid night finally kills it. A sealed, surge-protected enclosure costs more upfront but it is the difference between a two-year board and a board that outlasts the gate hardware around it.
Keypad and Remote Reprogramming
Keypads mounted on a metal pedestal near the street collect salt more aggressively than ones tucked under a carport. If the keypad lights but doesn’t release the gate, or the remote works from the driveway but not the street, the issue is usually a corroded contact or a receiver board that’s lost its programming. We reprogram, replace, or upgrade on-site.
Trusted Brands We Service in Lake Park
Our techs are factory-trained on the brands Lake Park homeowners actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common Viking, Ghost Controls, and DoorKing parts stocked for faster turnaround, because waiting a week for a board when your gate won’t close isn’t acceptable. If your system is older or discontinued, we’ll tell you straight and price out a replacement that actually fits your post and panel, not a generic unit someone has to force in. Every quote is written before we begin.
Common Electric Gate Repair Problems We See in Lake Park Homes
- Salt-shorted control boards on Intracoastal-facing streets. Homes within a quarter mile of the Lake Worth Lagoon routinely lose access boards when salt spray condenses on the circuitry. We replace the board and seal the new enclosure before leaving, because a bare board replacement is just a two-year timer.
- Sagging swing gates on 1950s and 1960s ranch homes. The gate itself isn’t failing; the original wrought-iron hinges and post footings are. Lake Park’s older bungalows often have posts set in cracked concrete that’s heaved over sixty years of wet summers. We rebuild the footing first, then align the gate and motor.
- Voltage surge damage after afternoon thunderstorms. Florida’s storm season is brutal on gate operator power supplies, and Lake Park gets the full force off the coast. A surge that doesn’t trip your breaker can still cook the transformer in the operator. We install surge protection as part of any repair that’s surge-related.
- Hinge and latch rust-through near the lagoon. Surface rust is cosmetic, but Lake Park’s salt air gets deeper: hinge pins can pit and snap, and latch assemblies seize. We remove the assembly, inspect the weld points, and replace with stainless or marine-coated hardware where the original has failed.
Pricing for Electric Gate Repair in Lake Park, FL
Here’s what Lake Park homeowners should expect to pay, in real numbers. Gate motor replacement runs $380 to $740. Control board replacement runs $250 to $550. Keypad or receiver repair runs $160 to $420. Hinge and post work runs $200 to $500 depending on whether we’re cutting out old welds or rebuilding a footing. Salt-damaged wire runs are $120 to $300. Every estimate is free, written, and quoted before work begins, so you’ll never open an invoice bigger than the quote. Call (626) 649-4572 and we’ll walk you through what your specific gate needs.
We Also Serve Cities Near Lake Park
While this page is focused on Lake Park, our Lake Park service area includes the broader region. We regularly send crews throughout Palm Beach County and the wider state: Electric Gate Repair in Jacksonville, Miami, Tampa, and Orlando. If you’re on the edge of Lake Park and unsure whether we cover your street, call us and ask.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Park
Standard residential operators near the Intracoastal in Lake Park typically fail in 18 to 24 months, while the same unit in inland communities like Greenacres often lasts six to ten years. Salt spray is the difference. Sealed, marine-rated enclosures and stainless mounting hardware are what change that math. Call (626) 649-4572 for a free assessment of what your specific gate needs to survive the coast.
In most Lake Park homes we inspect, the gate itself is fine; it’s the hinge welds and the post footing that have given up after fifty or sixty years of salt and wet soil. We replace the worn hinges with stainless or marine-coated hardware and rebuild the footing if it’s cracked or heaved. That fix gets the gate level and the motor pulling without strain. Want us to take a look? Estimates are free and written.
Lake Park gets squalls rolling off the Atlantic that hit fast and leave behind humidity spikes and power surges. The transformer and logic board in an unprotected operator absorb the hit, and even if the breaker doesn’t trip, the board can be damaged enough to fail a few weeks later. We install surge-protected, sealed enclosures on every board replacement out here. Call (626) 649-4572 and we’ll explain what your operator currently lacks.
Yes. UL 325 requires automatic gate operators to have an external entrapment protection device like photo-eyes or contact edges, and anything we install in Lake Park must comply. We test the existing sensors during any electric gate repair and replace them if they’re corroded, misaligned, or missing. Free estimate, written before work starts, on every call.
316 stainless steel or marine-coated galvanized hardware, a sealed NEMA-rated operator enclosure, and anti-corrosion treatment on the mounting plate and post base. Powder-coated painted steel, even well-installed, starts showing serious damage in two or three years if it’s within sight of the water. We spec marine-grade components on lagoon-facing properties for exactly this reason.
Your Lake Park Electric Gate, Done Right
On a lagoon-side block off Park Avenue, our tech opened a LiftMaster operator on a 1960s wrought-iron swing gate and found the logic board shorted from salt-driven corrosion while the hinge post footing had heaved. We replaced the footing, swapped in stainless fixings, and resealed the marine-rated enclosure. We repeated the fix a few doors down after a summer thunderstorm surge took out another board, and both gates have since cycled without a sag or board fault. That’s the Lake Park we know, and the gate work we’re built for. Call (626) 649-4572 for a free, written estimate, and we’ll answer live, day or night.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Lake Park, FL. Part of the Cedarwell family of gate specialists since 2009.