Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Kennedale
Electric gate repair in Kennedale typically runs $180 to $1,200 depending on whether we’re replacing a keypad, re-seating a hinge post, or swapping a burned-out operator. Most repairs on this side of the Tarrant/Johnson county line can be scheduled within one to two business days, and emergency calls for a gate stuck open or closed get answered by a live person around the clock. We know Kennedale’s gates aren’t the same as what you’ll find a few miles north in Arlington. Acreage lots, horse properties, and long gravel drives mean heavier gates, deeper posts, and openers that have to work harder. Call (626) 649-4572 and we’ll give you a written price before any work begins.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Kennedale through the Cedarwell family since 2009.
Why Latch & Post Gate Repair Is Kennedale’s Preferred Electric Gate Repair Company
Our Electric Gate Repair team works on the gates Kennedale actually has, not just the ornamental iron you see in newer subdivisions. That matters here. A technician who only services suburban swing gates will underestimate the load on a 16-foot pipe gate that a homeowner hung for livestock access back in the 1980s and later retrofitted with an opener that was never rated for it. We see that combination constantly across Kennedale, especially east of downtown toward the county line. We know the soil. We know the wind season. And we know which brands hold up on Blackland Prairie clay.
Kennedale homeowners call us because our technicians show up in uniform, lay drop cloths before stepping inside a garage to test the control board, and send a photo of the cleanup before they leave. The C.A.R.E. values are part of every visit: clean up like it’s our own home, ask before we move or touch anything, respect quiet hours, and explain the price before the work starts. If a kid is napping, we’ll run the quiet tools. If a dog is in the yard, we’ll ask before opening the gate or walking the fence line. That’s the standard, not an upgrade.
Every repair is backed by the 365-Day Done Right Promise. If the gate binds again or the keypad quits responding within a year, Latch & Post makes it right. No fine print, no argument, no charge. That promise means more on Kennedale’s acreage lots, where a gate that won’t latch leaves a horse trailer exposed and a driveway open to FM 3477 traffic.
Commercial Gate Operator in Kennedale
A commercial gate operator in Kennedale handles more cycles per day, heavier steel, and more demanding access control than a residential opener ever sees, and Gate Installation in Kennedale for a rural-residential or light-commercial property usually runs between $2,800 and $5,600 including the operator, wiring, safety edges, and labor. That’s the range we quote most often for properties along Kennedale-New Hope Road and the small business lots clustered near 287. The difference isn’t just the motor. It’s the duty cycle, the entrapment protection, and the operator’s ability to move a gate that may weigh several hundred pounds more than a standard driveway gate.
When a Kennedale homeowner or property manager asks about a commercial operator, it’s usually because a residential unit has already failed. Maybe the gate cycles fifty times a day for employees or equipment. Maybe the old opener was under-rated for the gate’s actual weight. Either way, we size the replacement to the gate, the post, and the usage pattern, not just to what the previous owner installed.
Access Control and Vehicle Detection
Commercial operators here often pair with loop detectors, telephone entry, or a keypad system that has to survive southern Tarrant County’s heat and the occasional ice storm. We install and calibrate the full loop, including splice points that resist moisture intrusion from Kennedale’s clay-heavy ground.
Safety Edges and Entrapment Protection
A commercial operator must have working entrapment protection that meets current UL 325 standards. We test safety edges and photocells on every commercial job, and we’ll tell you in writing if something needs replacement before we touch a single wire.
Gate Opener Repair in Kennedale
Gate opener repair in Kennedale covers the motor, the control board, the safety sensors, or the drive mechanism, and most of those repairs run between $220 and $680 depending on the brand and what actually failed. A Viking or Linear opener that’s losing its limit settings is usually a board or sensor issue. A Ghost Controls unit that’s dead after a spring storm is often a surge-damaged transformer. We diagnose before we quote, so you’ll know the number in writing before we order parts.
Openers fail faster in Kennedale than in most of the metroplex because of the combination of clay soil movement and mismatched hardware. A gate that heaves out of plumb puts constant strain on the opener’s gear train and limit switches. Fixing the opener without addressing the post means the same repair will be back in six months. We always check alignment, load, and post plumb as part of any opener repair.
Board-Level Diagnosis
Control boards on LiftMaster, FAAC, and BFT openers fail in specific ways, and most of those failures are diagnosable on-site with a multimeter in under thirty minutes. We don’t guess. We test, document, and quote the repair at a fixed price before ordering the replacement board.
Rack and Pinion Re-Leveling
Slide gates on Kennedale acreage properties run on rack and pinion drives that depend on a level track. When the clay heaves the posts, the rack shifts and the pinion skips. Re-leveling is part of most slide gate opener repairs here, not an add-on.
Trusted Brands We Service in Kennedale
Our technicians are factory-trained on the brands families actually own here: Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, Mighty Mule, and Elite. That training matters when a DoorKing controller on a Kennedale estate gate loses its loop detector settings, or a Viking operator on a horse property needs a new limit switch. We keep common boards, keypads, sensors, and remote transmitters stocked for fast turnaround, and when a part isn’t on the truck, we order it the same day. There’s no long wait for a specialized sub-contractor to drive in from Fort Worth. Our crew serves Kennedale directly.
Common Electric Gate Repair Problems We See in Kennedale Homes
- Post heave from Blackland Prairie clay. The same soil that cracks Kennedale sidewalks pushes gate posts out of plumb every wet spring and dry summer. A hinge post that moves half an inch is enough to make a gate drag, bind, and refuse to close.
- Under-rated operators on retrofitted cattle and equipment gates. Owners of older acreage properties often hung a residential opener on a heavy pipe gate that was designed for manual use. The motor burns out, the gear strips, or the board overheats, and suddenly the driveway won’t open.
- Hail and straight-line wind damage to ornamental panels. Southern Tarrant County spring storms batter iron driveway gates, and bent panels throw off the opener’s travel limits. The keypad entry system often goes down in the same storm, usually from a power surge riding the low-voltage line.
- Shared driveway and right-of-way constraints. Kennedale has a surprising number of shared drives and narrow easements where a swing gate won’t work at all. Sliding gates are the common solution, but they demand a level track and proper clearance, both of which fail when posts shift.
Pricing for Electric Gate Repair in Kennedale, TX
Here are the ranges we quote most often in Kennedale:
- Keypad replacement or reprogramming: $140 to $320
- Remote control replacement or pairing: $85 to $210
- Safety sensor or photocell repair: $160 to $380
- Control board replacement: $260 to $720
- Gate opener motor replacement: $340 to $850
- Full commercial operator install: $2,800 to $5,600
- Post re-setting and re-plumbing (single post): $220 to $580
Every quote is written, itemized, and delivered before we start. No number changes midway unless we uncover something structural and you approve the change in writing first. Estimates in Kennedale are free. Call (626) 649-4572 and we’ll send a technician out to look.
We Also Serve Cities Near Kennedale
Our crews cover Kennedale and the surrounding area, including Arlington, Mansfield, Burleson, and Fort Worth. If you’re just outside the city limits or your property straddles the Tarrant/Johnson county line, you’re still in our service footprint. Read more about our Electric Gate Repair work across the metroplex.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Kennedale
Kennedale sits on Blackland Prairie expansive clay that swells during spring rains and lifts gate posts out of plumb, which is why gates bind and jump track on a seasonal cycle here that you won’t see on the sandier soils of Arlington or south Fort Worth. The fix is re-setting the post deeper, often with a larger concrete pier than the original install, then re-leveling the track and re-calibrating the opener. Call (626) 649-4572 and we’ll confirm whether heave is the culprit before quoting the repair.
Yes, and this is one of the most common calls we get east of downtown Kennedale near the county line, where older pipe gates were retrofitted with residential-grade operators that can’t handle the load. We replace the under-rated opener with a unit sized for the gate’s actual weight, strengthen the post if needed, and often add a gusset plate when the existing hinge is undersized. You’ll get a written price before we remove anything.
Automatic gates in Kennedale must meet current UL 325 entrapment protection standards, which means working safety edges or photocells plus proper force settings on the operator, and we can test your system on a standard service visit. If your gate reverses on a child’s weight test or fails a photocell check, we’ll quote the repair in writing, usually between $160 and $380 for a sensor or edge replacement. This matters on properties with kids and pets, and it’s part of every inspection we do.
Yes, in most Kennedale shared-driveway situations we can extend the track run, adjust the travel limits, or re-position the rack so the gate fully clears the opening without replacing the entire gate. The fix depends on whether the restriction is mechanical or programmed, and we’ll diagnose it on-site before quoting a number. Most of these repairs run $220 to $600 and are done the same visit.
Yes, solar gate openers are a practical option for the many Kennedale acreage properties whose gate sits several hundred feet from the house and the nearest electrical panel, and we install solar-compatible operators from brands like Ghost Controls and Viking. A complete solar opener package with panel, battery, and hardware typically runs $1,200 to $2,800 installed in this area. Trenching a conventional power line the same distance usually costs more, and we’ll lay out both options in the written estimate.
If your gate is down, binding, or refusing to close in Kennedale, call (626) 649-4572 now. A live person answers, twenty-four hours a day, including weekends and holidays. We’ll schedule a visit, send a background-checked uniformed technician, and put the price in writing before any work starts. Clean floors, straight answers, and a gate that actually works. That’s the job.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Kennedale through the Cedarwell family since 2009.