Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Keller
A dead gate opener on a Monday morning isn’t a small inconvenience when your car is stuck in the driveway. Most electric gate repairs in Keller come down to three things: a hinge post heaved out of plumb by the black gumbo clay, an opener with a discontinued control board from the 1990s or early 2000s, or damage from an ice storm that cracked an operator housing. We fix all three, and we give you the written price before we touch anything. Call (626) 649-4572 and a live person answers, day or night.
Keller isn’t one kind of property. You’ll find horse acreage with heavy galvanized tube gates on corner-post hinges along Bear Creek Road, and three streets over, a deed-restricted subdivision with ornamental iron driveway gates that were standard builder upgrades in 2005. Our Electric Gate Repair team works on both, and we stock parts for the legacy operators that still run half this town.
Why Latch & Post Gate Repair Is Keller’s Preferred Electric Gate Repair Company
Keller homeowners call us because we show up ready for the specific gate they own, not a generic service call. The swing gate on a 1998 build off Rufe Snow Drive has different failure points than the slide gate on a 2012 custom home near Marshall Ridge. Cody Beckman has trained every technician to identify those differences before reaching for a tool, which is why most Keller jobs are resolved on the first visit.
We also don’t treat your home like a job site. Drop cloths go down before we walk a new opener through your entry. Shoe covers go on at the door. If you have kids asleep or a dog that loses its mind at strangers, we can schedule around nap time and keep our tools quiet. You get a photo of the cleanup before we leave, every visit, at no extra charge.
Every estimate is free and every price is written down before work begins. That’s not a promotion. It’s how we operate. If something isn’t done right, the 365-Day Done Right Promise covers the fix, with no argument and no fine print.
Commercial Gate Operator in Keller
Commercial Gate Operator work in Keller usually means one of two scenarios: a high-end residential property with a heavy operator built for frequent cycles, or a small HOA entrance, ranch entrance, or private road off Keller Parkway where the gate cycles dozens of times a day. Either way, the demands on the motor, the hinges, and the control board are much higher than a standard residential gate sees.
Heavy Operators on Custom and Ornamental Gates
A custom ornamental iron gate can weigh 800 pounds or more. The operator has to be sized correctly for that mass, or it burns through capacitors and gears every couple of years. We regularly correct under-spec’d operators on Keller’s larger estate properties, and we size replacements using the gate’s true weight and cycle rate, not a generic horsepower rating.
Matching Entries and Access Control
Many Keller properties pair a commercial operator with an intercom, keypad, or camera entry system. When the gate stops responding to the remote or the keypad, the issue is often the control board, not the motor. We test the entire chain: remote, keypad, receiver, board, and motor. That way you don’t pay for a new operator when a $90 board replacement is the fix.
A replacement commercial-grade operator for a Keller driveway gate typically runs $1,800 to $3,400 installed, depending on gate weight and whether new safety edges or a power run are required. You’ll see the exact number in writing before we order anything.
Gate Opener Repair in Keller
Gate Opener Repair in Keller is the call we make most often, and the cause is rarely what homeowners assume. The opener itself is typically fine. What fails is the control board, the limit switch, the capacitor, or the alignment that the opener is fighting against. When a hinge post heaves out of plumb in Keller’s black clay, the opener strains with every cycle and eventually burns out.
Legacy Boards and Discontinued Parts
The subdivisions built off Keller Parkway and Rufe Snow Drive during the late-1990s and early-2000s boom are aging out simultaneously. Mid-era GTO/Linear and Viking operators from that window have control boards that are increasingly discontinued. We keep compatible replacements and legacy parts on hand for Keller jobs, so a bad board doesn’t force you into a full system replacement.
Capacitors, Limits, and Gears
A hum that doesn’t move the gate is usually a capacitor. A gate that drifts or stops short is usually a limit switch or gear wear. These are straightforward repairs, but they need diagnosis: guessing costs more than testing. Our techs test the full circuit before replacing anything, and they explain the fix in plain terms before the work begins.
Most gate opener repairs in Keller run between $190 and $475 for common issues like capacitors, limit switches, and remote programming. Control board replacement on a legacy system runs $380 to $650. Replacement openers start around $1,100 installed for a standard residential swing gate.
Trusted Brands We Service in Keller
We’re factory-trained on the brands families in Keller actually own, including FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. More than brand familiarity, we stock local inventory for the discontinued Viking and Linear boards that keep showing up in Keller’s 20- to 30-year-old subdivisions. That means your repair doesn’t stall while a part ships from a warehouse in another state. We also know which modern operators are compatible retrofits for those legacy systems, so a 2002 Viking opener doesn’t have to mean a five-thousand-dollar gate replacement.
Common Electric Gate Repair Problems We See in Keller Homes
- Black clay heave on hinge posts. Keller’s expansive soil swells with spring rain and shrinks in the dry North Texas summer. The post leans, the gate sags, and the operator strains until something breaks. Fixing the electrical issue without realigning the post just resets the clock on the same failure.
- Discontinued control boards on 1990s and early 2000s openers. The GTO/Linear and Viking systems installed during Keller’s growth surge are failing all at once. Many boards are no longer made. We stock replacements and know which modern boards are drop-in compatible.
- Ice storm damage to housings and actuators. Keller sits slightly higher than Fort Worth, so winter ice storms hit harder here. Frozen hydraulic actuators, cracked operator housings, and snapped weld joints are common after a hard freeze. Gates built for mild winters weren’t designed for this stress.
- Remote and keypad failures. A gate that won’t open from the car but works from the keypad points to a receiver or programming issue, not the motor. We diagnose the full signal chain before replacing equipment, which saves Keller families from buying new openers they don’t need.
Pricing for Electric Gate Repair in Keller, TX
Every quote is written down and agreed before the work starts. No exceptions. You’ll never open an invoice that surprises you. Call (626) 649-4572 and we’ll put a number on paper, free.
We Also Serve Cities Near Keller
If you’re outside Keller proper, we serve the surrounding Tarrant County communities with the same written-price, shoe-covers, cleanup-photo routine. That includes Haslet, North Richland Hills, Roanoke, and Southlake. You can see all our coverage at Electric Gate Repair in Keller.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Keller
Why does my automatic gate in Keller keep going out of alignment even after we fix the gate itself?
The black gumbo clay under Keller expands and contracts with every wet-dry season cycle, and that movement heaves your hinge posts a little more each year. If the post footing was set shallow or the soil wasn’t stabilized, the post will keep moving and the gate will keep sagging. We fix this by re-setting the footing, correcting the post plumb, and re-grounding the operator’s limit switches so the gate runs a full correct cycle. Call (626) 649-4572 if your gate won’t stay straight, and we’ll inspect the footing, not just the gate panel.
My 2002-era gate opener in a Keller subdivision stopped working – can it be repaired or does it need replacement?
It depends on whether the control board is discontinued, which many mid-era GTO/Linear and Viking boards now are. If the board is still available, we repair it and you keep your existing opener. If it’s not, we install a compatible modern retrofit that matches your gate’s weight and cycle rate, usually without replacing the gate itself. We’ll tell you the repair cost and the replacement cost side by side before you decide anything.
Does my Keller gate need entrapment protection to be legal?
Yes. Automatic gate operators in Texas must meet UL 325 entrapment protection standards, which means working safety sensors, edges, or both, depending on the gate type and installation date. Many 1990s-era Keller gates were installed before current standards and lack proper entrapment protection. We check this on every repair visit, and if your gate doesn’t meet the current requirement, we’ll quote the retrofit in writing before any work is done.
Can an ice storm really damage a gate operator in Keller?
Yes, and Keller sees this more than lower-elevation parts of the Metroplex. Freezing water inside hydraulic actuators expands and cracks cylinders. Operator housings made of lighter plastic become brittle in a hard freeze and shatter. Weld joints on gates built for mild winters snap under ice load. After any Keller ice storm, we get a wave of these calls. The fix usually involves a new actuator or housing, not a full gate rebuild.
Do you work on both ranch pipe gates and ornamental iron driveway gates in Keller?
We do. Keller’s dual identity means we see heavy galvanized tube gates on corner-post hinges off Bear Creek Road and custom ornamental iron driveway gates in the HOA subdivisions off Keller Parkway, sometimes on the same day. The soil, the operators, and the hinges are different on each, and we stock parts for both. A 1-acre horse property gate and a subdivision ornamental gate get the same written price and the same 365-Day Done Right Promise.
Call Latch & Post Gate Repair for Electric Gate Service in Keller
When your gate won’t open, call (626) 649-4572. You’ll reach a live person, not a voicemail. We’ll schedule a visit that works for your family, send a background-checked, uniformed technician who explains the problem in plain language, and hand you a written price before any work begins. Shoe covers, drop cloths, a cleanup photo, and the 365-Day Done Right Promise are all included, every visit, never an upsell. Cody Beckman and the Latch & Post team serve Keller families with the same care we’d want at our own homes.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Keller since 2009.