Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Inglewood
If your electric gate in Inglewood won’t open, grinds when it moves, or stopped responding to the remote, the most likely culprits are a dead control board, a worn gate motor, or corroded hinge hardware, and most repairs run between $180 and $650. We work on gates throughout Inglewood, from the bungalow streets north of Centinela to the apartment complexes along Crenshaw Boulevard, and we’ll come out, diagnose the problem, and put a written price in your hand before any work starts. Latch & Post Gate Repair is part of the Cedarwell family of gate specialists, and our Electric Gate Repair team works exclusively on gates, nothing else. Call (626) 649-4572 if your gate needs attention in Inglewood.
Why Latch & Post Gate Repair Is Inglewood’s Preferred Electric Gate Repair Company
The gates in Inglewood are not the gates in Hawthorne or Gardena. We say that because five miles inland, the marine layer sits over this city most mornings, and salt-laden humidity works into iron hinges, rollers, and latch hardware year-round. A gate that was repainted three years ago may already be showing rust blooms near the post collars. Our technicians are trained on the brands families in Inglewood actually own, including FAAC, BFT, Linear, and Viking, so the diagnosis on the first visit is usually the diagnosis that holds.
We’re part of the Cedarwell family, independently owned and operated, and we’ve been doing gate work since 2009. Cody Beckman leads our team, and every technician we send to an Inglewood home is background-checked, uniformed, and expected to follow the same routine: shoe covers before stepping inside, drop cloths under any work area, and a photo of the cleanup before we leave. If you have kids asleep or a nervous dog behind the gate, we’ll work quietly and keep the gate area contained.
Every job we do in Inglewood is covered by our 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print. That promise matters more here than in most places, because the gates we’re often called to fix are 50 to 70 years old and have been neglected for a long stretch.
Gate Opener Repair in Inglewood
Gate Opener Repair in Inglewood usually means diagnosing why a gate motor has stopped responding or is moving slower than it should, and in this city that often traces back to moisture intrusion in the motor housing or a control board that gave out quietly after years of coastal air exposure. On older Inglewood properties, the original opener may date from the 1970s or 1980s, and it has likely seen a decade or more of marine-layer humidity. A typical gate opener repair here runs $220 to $480 for the parts and labor on a swing or slide gate opener, and you’ll see the exact figure in writing before we touch anything.
What Happens During a Gate Opener Repair
Our technician starts by confirming whether the opener is actually receiving power, then opens the motor cover to look for corrosion on the terminals and any sign of capacitor or gear failure. On an Inglewood property near the Hollywood Park corridor, we check for grounding issues that can be amplified by older building wiring. The goal is a repair that lasts, not a temporary pep talk for a motor that’s already finished.
When Replacement Is the Smarter Route
If the opener is older than 20 years and the manufacturer no longer supports the circuit board, retrofitting new safety features often costs more than a new opener with photocells and current UL 325 entrapment protection. We’ll tell you straight when repair dollars would be wasted. A replacement opener on an existing Inglewood gate typically runs $650 to $1,200, and we quote that before any work begins.
Automatic Gate Repair in Inglewood
Automatic Gate Repair in Inglewood covers everything from a slide gate that stops halfway to a swing gate that drags on the concrete. On post-WWII wood-frame properties, the original gates were often ornamental wrought iron, and decades of marine air have left hinge posts seized and anchor collars cracked. A sagging automatic gate in Inglewood may need hinge and post remediation, not just a motor tweak, and a typical repair call runs $180 to $500 depending on whether we’re resetting the track, replacing a roller, or realigning the opener arm.
Swing Gate Wear on Aging Inglewood Iron
We commonly see 1950s and 1960s wrought iron swing gates on Inglewood bungalows where the gate leaf itself is still sound but the post footing has failed. When that happens, the gate sags, the opener strains, and eventually the operator burns out. We’ll assess whether the post can be rebedded or whether new concrete anchor collars are needed, and we’ll talk through the repair versus replace decision before quoting.
Slide Gate Track and Roller Work
Many 1970s and 1980s Inglewood multi-unit buildings have sliding tube-steel driveway gates on original tracks. The tracks fill with debris, the rollers go flat, and the gate starts shuddering. A track and roller service on a slide gate in Inglewood typically runs $250 to $450, and we’ll always note the condition of the operator while we’re there.
Trusted Brands We Service in Inglewood
We service the gate operators you’ll actually find on Inglewood driveways: FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. Our technicians are factory-trained on those brands, and because Inglewood’s housing stock spans six decades of gate operator history, we keep common control boards, remote receivers, and safety sensor parts available locally. That means less waiting for parts and a better chance we complete the job on the first visit. Whatever brand is on your Inglewood gate, call us and we’ll confirm our technician carries what it needs before we schedule the visit.
Common Electric Gate Repair Problems We See in Inglewood Homes
- Seized hinge posts on 1940s-1960s wrought iron swing gates: Inglewood’s marine-layer humidity works into the post collars and the gate stops swinging true. The opener then fights the bind until the motor or the arm fails.
- Dead or obsolete control boards on 1970s-1980s slide gate operators: The original loop-detector or keypad units are genuinely past their service life, and they often cannot be safely retrofitted with modern entrapment protection.
- Chronic rust and pitting on iron gate hardware: Salt-laden moisture from the Pacific means powder-coat and paint failure returns again and again here, so we focus on treating the hardware, not just touching up the visible surface.
- Gates that haven’t moved in years: Near the SoFi Stadium corridor, we regularly get calls from landlords who assumed a rusted gate just needed a tune-up. Often the post footing is cracked, the operator is dead, and the honest answer is full replacement.
Pricing for Electric Gate Repair in Inglewood, CA
Here’s the straight pricing picture for Inglewood. A diagnostic and minor electrical repair (sensor realignment, remote reprogramming, limit switch adjustment) typically runs $120 to $200. A gate opener motor replacement runs $220 to $480, and a full opener and control board replacement on an existing gate runs $650 to $1,200. If the gate itself is beyond saving and we’re quoting a new automatic gate install, that typically lands between $2,500 and $6,000 depending on the gate material, length, and operator type. Every estimate is a written price, delivered before any work begins, and there is no pressure to accept on the spot. Call (626) 649-4572 for a free on-site estimate at your Inglewood home. The price we quote is the price you’ll pay.
We Also Serve Cities Near Inglewood
If you’re just outside Inglewood, chances are we serve your neighborhood too. Our Electric Gate Repair in Inglewood team covers nearby Hawthorne, Culver City, El Segundo, and Lawndale, and we’re familiar with how the coastal air affects gate hardware all along this stretch of Los Angeles County. Call us and we’ll let you know if we can get to your property this week.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Inglewood
It depends on the condition of the posts and the gate leaf itself, not just the operator. On a gate that old in Inglewood, the hinge post footing is often cracked and the concrete anchor collar split from years of marine humidity and ground movement. If the operator is dead and the gate is seized, a repair quote may land close to what a new automatic gate install would cost, and we’ll lay out both numbers in writing. Call (626) 649-4572 and we’ll assess it on site and tell you honestly whether repair or replacement is the cheaper use of your money.
Inglewood sits roughly five miles inland from the Pacific and lingers under the marine layer most mornings, which means iron and steel gate hardware is exposed to persistent salt-laden humidity. That humidity accelerates rust and pitting on hinges, rollers, and latch hardware faster than in drier inland cities, and it’s why powder-coat and paint failure on wrought iron gates is a repeat-service issue rather than a one-time fix. When we service a gate in Inglewood, we address the hardware corrosion, not just the surface rust.
Usually not, and we’ll say so plainly. Control boards and loop-detector systems from that era are well past their service life and cannot safely be retrofitted with current UL 325 entrapment protection, so the honest answer is replacing the operator with a modern unit that includes photocells and current safety features. A replacement operator on an existing Inglewood gate runs roughly $650 to $1,200. Call (626) 649-4572 and we’ll confirm what your gate needs.
We service FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. If your Inglewood gate operator is one of those brands, we stock common replacement parts locally and a factory-trained technician will handle the repair. If you’re not sure what brand is on your gate, call us and describe the operator; we’ll likely recognize it from your description or from a photo.
If the gate leaf itself is solid and the sag is coming from a worn hinge or a post that has shifted, hinge repair is usually the fix, and it typically runs $180 to $500 on an Inglewood gate. But when the hinge post footing is cracked or the concrete anchor collar is split, the post needs to be reset before new hinges will hold. We’ll tell you which situation you have after inspecting the gate, and both the repair price and any replacement option will be in writing before work starts.
Call Latch & Post Gate Repair in Inglewood
If your gate is stuck, sagging, rusting, or just making a sound it never used to make, call (626) 649-4572. A live person answers our phone 24 hours a day, every day, and you can expect a free estimate and a written price before any work begins. We’ll show up with shoe covers, drop cloths, and a technician who knows the difference between a gate that needs a $200 repair and a gate that’s finished. In Inglewood, that difference matters more than most places.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Inglewood and nearby cities.