Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Houston
Electric gate repair in Houston usually comes down to two things: power and post plumb. We fix both. If your gate strains, stops mid-travel, or refuses to close after a heavy rain, call (626) 649-4572 and a live person answers, day or night. Our crews work across Houston’s acreage communities and inner-loop neighborhoods, from Katy and Pearland to The Heights and Montrose, and we arrive with the parts most Houston gates actually need already on the truck.
Houston’s black gumbo clay is the quiet culprit behind a lot of “dead” electric gates. The soil swells in wet springs, shrinks in dry summers, and every cycle tilts hinge posts out of plumb by a fraction of an inch. Over a season or two, that fraction becomes a gate that drags, trips its own safety sensors, and burns out operator motors that were never actually faulty. That’s why our Electric Gate Repair team checks post plumb first on every Houston call, before we ever touch a control board.
For families on acreage east of Houston or out toward Katy and Sugar Land, the picture gets more specific: long driveways, heavy farm slide gates, and solar operators that have to push a lot of gate through a lot of humidity. We service Viking, Ghost Controls, and DoorKing equipment every week in Houston, and we stock the boards, batteries, and safety parts those systems need so you’re not waiting on a ground shipment while your gate sits half-open.
Why Latch & Post Gate Repair Is Houston’s Preferred Electric Gate Repair Company
We’re a Cedarwell-family gate specialist, not a general handyman service. Founded in 2009, we focus exclusively on gate repair, gate installation, and electric gate repair. That narrow focus means our technicians in Houston have seen the same clay-soil post shift, the same corroded Viking hinge, the same solar battery failure, hundreds of times. The fix happens faster because the diagnosis is already familiar.
Houston homeowners tell us the same thing again and again: they want a straight price before the work starts, and they want the gate working before the kids come home from school. We deliver both. Every visit includes a written price, delivered before we touch anything. No pressure, no “while we’re here” add-ons. Our technicians are background-checked and uniformed, and they work under the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
Inside the house, we lay drop cloths on the floor and put on shoe covers before we step inside. If there’s a dog in the yard and a baby asleep upstairs, we can schedule around nap time and use pet-safe lubricants where there’s a choice. When the gate is fixed and the area is clean, we take a photo of the clean-up before we leave. That’s not an upsell. It’s just the way we work.
And when a Houston gate fails at 11 p.m. because a storm blew the operator board, a live person answers our phone. That’s 24 hours a day, seven days a week, holidays included. You won’t get a voicemail or a callback queue. You’ll get someone who knows gates.
Gate Access Control in Houston
Gate access control in Houston means something different out in Katy or Pearland than it does inside the Loop. On acreage, it’s usually a keypad on a post, a remote for the truck, and maybe a phone app so the kids can get in after school. Closer in, near The Heights or Montrose, it’s often a pedestrian gate with an electric strike and a keypad that has to survive Houston’s humidity without corroding its contacts. Either way, the access system has to work every time, even after a Gulf storm blows through.
Most Houston access-control repairs run between $180 and $420 for a keypad replacement or remote programming, while a full keypad plus receiver and strike setup typically lands between $450 and $800. You’ll see the exact number in writing before we start. No invoice surprises.
Keypad and remote programming
Houston’s humidity is hard on keypad contacts and remote fobs. We clean corroded terminals, replace worn buttons, and reprogram receivers on LiftMaster, FAAC, BFT, and Ghost Controls systems so every code works the first time. If your kids are standing in the rain punching a dead keypad, we can usually get you back in the same day.
Safety sensor and loop detector repair
Wide farm slide gates on Houston acreage rely on loop detectors and safety photocells to reverse before they hit a car or a child. Coastal humidity and the clay soil’s constant movement knock these sensors out of alignment. We test, re-aim, and replace them so the gate stops and reverses exactly when it should.
Commercial Gate Operator in Houston
A commercial gate operator in Houston has to handle real weight, real cycles, and real weather. Community entrances in Katy and Sugar Land, ranch gates in Pearland and Missouri City, and industrial lots along the Beltway all run Viking, DoorKing, and Elite operators that see hundreds of open-close cycles a day. When one of those operators fails, the whole property slows down.
Commercial operator repair in Houston typically runs between $350 and $900 for a motor, board, or limit-switch replacement, and between $900 and $2,200 for a full operator swap on a heavy slide gate. We deliver a written price before any work begins, and our 365-Day Done Right Promise covers every repair. If it isn’t right, we make it right. No argument.
Heavy slide gate operators
Houston’s wide farm and ranch gates put a heavy load on slide operators, especially when clay soil shifts the track or rack out of line. We re-plumb posts, re-set racks, and replace strained motors before they burn out completely. A gate that glides now beats a gate that grinds for another six months.
Storm damage and flood recovery
After Harvey-style flooding, low-mounted operator housings and control boards on Houston acreage entrances often sit in water long enough to fail. We replace submerged boards, dry out and test motors, and re-seal housings so the next storm doesn’t do the same damage. This is bread-and-butter work for us in Houston.
Trusted Brands We Service in Houston
We’re factory-trained on the brands Houston families and businesses actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Most weeks in Houston, our trucks are stocked with Viking control boards, Ghost Controls remotes and arms, and DoorKing loop detectors, because those are the units we see failing most often on acreage properties and community entrances. That means faster turnaround for you. The right part shows up on the first visit, not the third.
Cody Beckman, our owner, set the expectation years ago: we repair what’s broken, we explain what we’re doing, and we don’t sell you a whole new operator when a $40 limit switch fixes the problem. That’s the standard every Houston technician works to.
Common Electric Gate Repair Problems We See in Houston Homes
- Post shift from black gumbo clay. Houston’s clay soil expands and contracts through the year, tilting hinge posts and dragging gates out of plumb. The operator strains, the safety sensors trip, and the gate quits. We re-plumb the post and reset the geometry before looking at the electronics.
- Solar gate opener failures on long driveways. Rural Houston properties often run solar operators on Viking or Ghost Controls systems because mains power is impractical out past the acreage lots. The problem isn’t always the panel or battery. It’s frequently a gate binding against a rack that moved with the clay.
- Rusted rollers, latches, and loop detectors. Houston’s near-coastal humidity, above 75 percent year-round, accelerates rust on iron and steel gate hardware. Rollers seize, latches corrode, and loop detector housings fail intermittently, leaving the gate stopping halfway with no error code.
- Flood-damaged control boards. Gulf storms and heavy rains submerge low-mounted operator housings on Houston acreage entrances. Control boards and battery banks fail days or weeks later. We replace, re-seal, and test so the gate doesn’t dump you again in the next storm.
Pricing for Electric Gate Repair in Houston, TX
A typical electric gate repair in Houston runs between $180 and $420 for fixes like keypad replacement, remote programming, or limit-switch adjustment. Board and motor replacements on residential operators usually land between $300 and $650. Heavy commercial slide-gate operators run higher: $900 to $2,200 for a full swap, depending on gate weight and cycle count. Houston’s clay soil adds a layer here: if the post has shifted, re-plumbing and re-setting the footing adds $150 to $400, and it’s often the difference between a gate that works for a season and one that works for years.
Every price is quoted and agreed in writing before any work starts. That’s non-negotiable. Call (626) 649-4572 for a free estimate, and you’ll know the number before we open a single panel.
We Also Serve Cities Near Houston
Our Houston crews also cover Electric Gate Repair in Houston‘s surrounding communities: Galena Park, Pasadena, Channelview, and South Houston. If your gate sits on a clay-shifted post in Pasadena or a storm-damaged operator in Channelview, the same written-price, shoe-covers, cleanup-photo standard applies. Same team, same 365-Day Done Right Promise.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Houston
The usual reason is post movement from Houston’s black gumbo clay, not the operator itself. When wet springs swell the soil and dry summers shrink it, the hinge post tilts a little more each cycle until the gate binds and the operator’s safety circuit shuts it down. Resetting clears the fault, but the bind is still there, so it fails again. We re-plumb the post and footing, and the operator stops tripping. Call (626) 649-4572 if you’ve reset twice and it’s still failing.
Yes, and we do it regularly on Houston acreage properties where mains power is impractical. Solar operators from Ghost Controls and Viking can push a wide farm slide gate if the gate is plumb, the rack is aligned, and the battery bank is sized for the gate’s cycle count. The catch in Houston is clay soil: if the post shifts, the solar operator strains and drains its batteries fast. We’ll check the plumb first, then the power.
Yes, and they need to be working. Houston’s gate safety code and UL 325 standard require monitored photocells and reverse sensors on automatic gates so they stop and reverse before hitting a person, pet, or car. Our repair work includes testing those sensors on every visit. If yours aren’t working, we fix them before we leave.
Start by checking whether water got into the operator housing or the loop detector junction box. Houston storms and Harvey-style flooding submerge low-mounted housings on acreage entrances, and the board or detector fails days later. Don’t keep resetting it. A waterlogged board can short and take the motor with it. Call us at (626) 649-4572 and we’ll dry out, test, and re-seal the housing properly.
On Houston’s black gumbo clay, a gate post can move out of plumb within a single season if the footing wasn’t set deep and wide. Many homes we visit need re-plumbing every three to five years, depending on drainage, gate weight, and how wet the spring was. If your gate drags in August after a wet March, the post has moved. We fix it and re-set the geometry so the operator doesn’t fight the gate.
Call (626) 649-4572 for a free estimate on any electric gate repair in Houston. A live person answers, and you’ll get a written price before we begin.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Houston with electric gate repair since 2009.