Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richardson, TX
Richardson has two distinct gate markets. The Telecom Corridor along US-75 is dense with commercial buildings running automated access gates from brands like FAAC and Viking, while south Richardson’s 1960s and 1970s brick ranch neighborhoods are full of original wrought-iron driveway gates that have outlived their intended lifespan. Blackland Prairie clay underneath both means posts shift with every wet and dry cycle, which is why so many Richardson gates bind, drag, or stop latching. That’s the work we do at Latch & Post Gate Repair. Call (626) 649-4572 and you’ll get a written price before anything gets touched.
Why Richardson Homes Are Different
The soil below Richardson isn’t like the sandier ground you’ll find north in Frisco or McKinney. Blackland Prairie clay swells after spring rains and shrinks hard during August drought, moving gate posts vertically by one to three inches across a single season. A gate that swings clean in March can drag on its concrete by May, then leave a latch-side gap in late summer when the ground drops back. It’s the single most common root cause of gate misalignment and electric operator burnout in Richardson, and it’s why we quote a seasonal adjustment plan up front here. That’s standard practice in this city in a way it simply isn’t in neighboring Plano’s northern sections.
Housing stock matters too. South Richardson, roughly the 75080 and 75081 ZIP codes, holds a large run of 1960s and 1970s brick ranch homes. A meaningful number still have their original wrought-iron swing gates on steel posts, now 40 to 60 years old and failing in clusters. North Richardson leans toward 1980s-2000s subdivision builds with wood-panel and aluminum automated gates, many wired into HOA access systems that need a gentler touch and often a particular operator brand kept on hand. Our crews know both kinds of jobs, and we bring drop cloths and shoe covers inside whether it’s a mudroom-adjacent control panel or a gate post near the flower beds.
Our Main Richardson Services
Richardson homeowners call us most about two things: gates that won’t close properly because the soil has moved, and aging electric systems that no longer respond. Each service has its own Richardson page below with pricing and specifics.
Gate Repair in Richardson
Most Richardson repair calls start with a gate that drags on the concrete or stops catching the latch, and the cause is usually post movement from clay heaving, not the hinge itself. We assess whether the fix is a post reset, a hinge replacement, or a latch-side adjustment to account for the seasonal drop. On ornamental wrought-iron gates in the older south Richardson ranches, we check for rust at the weld points and worn steel post caps before quoting anything. Every repair gets a written price first, and you’ll know the exact number before we touch a tool. See what’s involved on our Gate Repair in Richardson page.
Gate Installation in Richardson
New gate installations in Richardson need to account for clay soil from day one. That means deeper post settings or a plan for seasonal adjustment, particularly for the heavier wrought-iron and steel-frame gates south Richardson homeowners often choose to match original architecture. North Richardson installs tend toward aluminum and wood-panel gates with automated operators tied into HOA access requirements, so we coordinate the power run and safety edges as part of the scope. We’ll measure, provide a written price, and schedule the work without pressure. Details are on the Gate Installation in Richardson page.
Electric Gate Repair in Richardson
Clay heaving overworks electric operators in Richardson faster than nearly anything else, so we see a lot of burned-out motors and stripped rack-and-pinion drives. Ice storms in North Texas winters add another failure point when drives seize up from cold weather without proper lubricant. We service factory systems from FAAC, BFT, Linear, and Viking, and we stock common parts for those brands so a first-visit fix is usually possible. The full breakdown is on the Electric Gate Repair in Richardson page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richardson
We’re factory-trained on the gate systems Richardson homeowners and businesses actually run, including FAAC, BFT, Linear, and Viking. Common parts for these brands stay stocked in our metro-area inventory, which usually means a same-week repair rather than a parts-order delay. See our brands for the full list.
Pricing for Gate Company in Richardson, TX
| Service | Typical range in Richardson |
|---|---|
| Gate latch replacement | $145 - $285 |
| Hinge replacement (pair) | $190 - $370 |
| Gate post reset (single post) | $325 - $575 |
| Wrought-iron gate realignment | $210 - $420 |
| Gate wheel / caster replacement | $95 - $185 |
| Electric operator motor replacement | $385 - $750 |
| Control board replacement | $240 - $520 |
| Safety sensor or edge replacement | $165 - $340 |
| New gate installation (standard) | $1,400 - $4,200 |
| Electric gate system install (operators, sensors) | $1,900 - $5,600 |
Prices in Richardson climb when clay heaving has pulled a post badly out of plumb and we need to dig and reset it rather than shim. Rusted steel posts on older south Richardson wrought-iron gates also add labor if replacement is needed. Whatever the number is, you’ll see it written down before any work starts and the price never changes after you approve it.
Neighborhoods We Serve in Richardson
We cover all of Richardson, from the ranch-home streets south of Arapaho down toward Spring Valley, across the central neighborhoods around Heights Park, and up into the subdivisions near Canyon Creek. Most gate repair calls in Richardson can be scheduled within a day or two, and emergency service is available by phone around the clock.
- Canyon Creek (north Richardson, HOA automated gates)
- Heights Park (central Richardson, 1960s-1970s homes)
- Cottonwood Heights (south Richardson, original wrought-iron gates)
- Reservation (central north, mixed gate styles)
- Springpark (far north Richardson, aluminum and wood residential gates)
Service Area – Cities Near Richardson
Latch & Post Gate Repair coordinates scheduling from the Cedarwell family’s Dallas-Fort Worth office, with crews serving Richardson directly. Our service area also covers neighboring communities including Addison, TX, Plano, TX, Garland, TX, and Carrollton, TX. If you’re close to a city line, call us and we’ll confirm which crew covers your street.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richardson
Most non-emergency gate repairs in Richardson are scheduled within one to two days. A live person answers the phone 24/7 at (626) 649-4572, and if a gate is stuck open or won’t secure, we’ll treat it as urgent and route the soonest available crew.
Many Richardson neighborhoods, especially newer north Richardson subdivisions, have HOA rules about gate style, height, and finish. We’ll note any obvious HOA constraints during the estimate, but it’s best to check your community’s standards before installation work begins. Repair work on existing gates rarely requires approval.
Yes. We can schedule around nap time or school pickup if quiet matters, and we choose pet-safe lubricants where there’s a choice. Our technicians wear shoe covers inside and lay drop cloths before any indoor work, and a cleanup photo is included before we leave.
If your gate is dragging, sagging, or refusing to open, call Latch & Post Gate Repair at (626) 649-4572 for a free estimate. Cody Beckman and the team will give you a straight written price before any work begins, and the 365-Day Done Right Promise covers every repair and installation we complete in Richardson.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richardson Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick