Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Highland
Electric gate repair in Highland usually means one of three things: a motor that stopped responding, a gate that binds partway through its travel, or an access system that won’t read the remote or keypad anymore. Our crews handle all three, and they know Highland’s specific headache: Santa Ana winds that rack swing gates off their hinge posts and pull footings loose in the foothill shared driveways. Call (626) 649-4572 and a live person answers, day or night.
We’re a Electric Gate Repair team that works exclusively on gates: the latch, the post, the operator, the access controls. Highland’s north side is full of HOA tract communities built from the late 1980s through the mid-2000s, and those original ornamental iron and aluminum operators are now hitting their first major service cycle. Failing rack and pinion drives, corroded hinge posts, stripped gears, dead control boards. We see it every week in neighborhoods like East Highlands Ranch and the tracts along Greenspot Road.
What Makes Highland Different
Highland sits at the base of the San Bernardino Mountains inside a designated Wildland-Urban Interface zone. That’s not just planning jargon. San Bernardino County Fire requires automated driveway gates in WUI foothill properties to have Knox switches or approved rapid-entry devices so engines can get through without waiting for a homeowner. Many gates in Highland’s HOA tracts were permitted before that rule existed, so a routine operator replacement often surfaces a compliance gap nobody knew about. We flag it, explain it, and fix the operator so the gate works while the board sorts out the fire access.
And the wind here is not like the flatland cities to the west. Downslope Santa Ana events funnel straight through the pass into Highland with enough force to pull post footings and rack a swing gate off its hinges. That’s a recurring seasonal failure we prepare for every fall and winter.
Why Latch & Post Gate Repair Is Highland’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, which means every Highland job follows the same documented care routine. Written price before work starts. Shoe covers and drop cloths on every visit. A photo of the cleanup before the technician leaves. Most gate companies never offer that, and Highland families with kids and dogs notice the difference immediately.
Highland homeowners keep calling us back for a simple reason: we show up knowing the equipment. Cody Beckman, who leads our gate team, trains every technician on the brands Highland actually uses: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the right diagnostic happens on the first visit, not the third. Our local reputation in Highland is built on that: the gate gets fixed, the floors stay clean, and the price matched the written quote.
We hold every job to the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print. That guarantee follows every operator replacement, hinge post reset, and access control repair we complete in Highland.
Electric Gate Motor in Highland
An electric gate motor in Highland takes constant abuse from wind loading and hard water, and a motor that hums but doesn’t move is usually the gearbox or the capacitor, not the motor itself. Highland’s hard San Bernardino County water leaves mineral scale and corrosion on steel hinges, spring tensioners, and automatic operator gearboxes throughout the year. That corrosion causes intermittent binding, which makes the motor work harder, overheat, and eventually fail. When we replace a motor in Highland, we check the post alignment, the hinge condition, and the rack and pinion wear before we install anything new. There’s no point selling a motor into a system that’s already sagging.
What a Motor Repair Includes
We diagnose the operator, confirm whether the fault is in the motor, the control board, or the wiring, and give you a written price before any work begins. On a Highland slide gate, we’re also looking at whether the rack and pinion drive has stripped from years of wind stress. Most standard gate motor replacements in Highland run between $450 and $900 depending on the operator type and the condition of the existing mounting hardware.
When a Highland Homeowner Needs This
The gate starts moving slower than it used to. It reverses mid-cycle. It makes a grinding sound near the drive gear. Or it stops responding entirely after a wind event. Those are all signs the motor or its drive train is failing, and waiting usually means a bigger repair later. We can diagnose it same day in most Highland neighborhoods, and the replacement itself is typically scheduled within a few days because we keep common operator parts stocked for the brands Highland homes actually run.
Gate Access Control in Highland
Gate access control in Highland covers the keypad, the remote receivers, the safety sensors, and the control board that tells the gate when to open and when to stop. Highland’s housing stock skews toward HOA-governed tracts, so many of these systems are shared across multiple homes. When the access system fails, it’s not one family locked out, it’s every family using that shared driveway. We treat those calls as a priority.
The Keypad and Remote Side
A keypad that won’t accept the code or a remote that works only from ten feet away usually points to a receiver issue or water intrusion in the housing. Highland’s seasonal rains and the mineral content in the air up against the foothills speed up that corrosion. We replace keypads and receivers, reprogram remotes, and test every access point before we leave. A keypad replacement in Highland typically runs $180 to $350 including the part and the programming.
The Safety and Control Side
Safety photocells and loop detectors are the parts that keep a gate from closing on a car, a kid, or a dog. In Highland’s tight shared driveways, a misaligned photocell means the gate reverses for no reason, or worse, doesn’t reverse when it should. The control board is the brain, and in the older 1980s and 1990s operators still running in Highland, boards fail from age and heat. We carry replacement boards for Viking, DoorKing, Elite, and Ghost Controls systems, and most control board replacements in Highland land between $350 and $650 installed.
Every access control job gets a written price before we start. You’ll see the exact number on paper before anything gets touched.
Trusted Brands We Service in Highland
We’re factory trained on the brands Highland’s gate systems actually use, so we’re not learning on your driveway. That list includes Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because Highland is a concentrated market of 1980s through 2000s tract builds, we keep common parts for these brands stocked locally, not shipped in from a warehouse two states away. That shortens the wait when your operator dies on a Friday afternoon and the HOA wants it fixed before the weekend.
Common Electric Gate Repair Problems We See in Highland Homes
- Santa Ana wind racking swing gates off their hinge posts. The downslope winds funnel through the mountain pass and into Highland’s foothill driveways with enough force to pull post footings. We reset and reinforce posts, then re-square the gate so the operator isn’t fighting a misaligned leaf.
- Mineral scale binding steel hinges and operator gearboxes. San Bernardino County’s hard water is rough on moving metal. We see hinges that won’t swing freely and gears that bind mid-cycle from corrosion, even in gates less than fifteen years old.
- Failed rack and pinion drives on original slide gate operators. Many Highland HOA slide gates were installed when the tract was built, and the plastic rack gears are now stripped or cracked. The gate jerks, makes a grinding noise, and eventually stops responding.
- Missing Knox switches on WUI zone gates. We don’t install the switch ourselves, but we flag it every time we see an automated gate in a foothill HOA that lacks one. The county requires rapid-entry access, and a routine operator replacement is often the moment the gap gets caught. We explain what’s needed so the board can act.
Pricing for Electric Gate Repair in Highland, CA
Electric gate repair in Highland costs more than a basic side-yard latch replacement because the components are heavier, the systems are more complex, and the stakes are higher when the gate protects a shared driveway or a WUI-zone property. A typical gate motor replacement runs $450 to $900. Keypads land between $180 and $350. Control boards run $350 to $650. Hinge post resets, which Highland’s Santa Ana damage makes common, are usually $300 to $700 depending on whether the post needs a new footing or just a re-set and reinforcement. Every estimate is free, and the written price you get is the price you pay. That’s the Cedarwell Care Promise, and it applies to every job in Highland.
You’ll see the exact number in writing before we touch anything. No pressure, no surprise invoice. Call (626) 649-4572 and we’ll schedule a time that works around your family, including nap hours if quiet matters.
We Also Serve Cities Near Highland
If you’re just outside Highland, we also serve Highland and the surrounding communities: San Bernardino, Loma Linda, Redlands, and Mentone. Same written-price promise, same crews, same 365-Day Done Right Promise on every job.
Serving Highland, CA - Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Highland
Usually it’s the gate itself, specifically a hinge post that’s shifted from wind loading or a wheel that’s seized from mineral buildup. The operator may be working fine but fighting a gate that no longer swings or slides true. We check the post alignment, the hinge condition, and the operator settings before we quote anything. Call (626) 649-4572 for a free diagnosis.
If your gate is in a Wildland-Urban Interface zone, which covers most of Highland’s foothill HOA communities, San Bernardino County Fire typically requires a Knox switch or approved rapid-entry device. Many gates predate that rule, so the requirement only surfaces when the operator is replaced or the county inspects. We identify the gap for you, but the switch itself is installed by a fire-access contractor or coordinated through the HOA.
Yes. Tight shared driveways are the standard in Highland’s HOA tracts, and we work in that space every week. A slide gate is usually the right choice there because a swing gate wouldn’t have room to arc. We repair the rack and pinion, reset the post, and reposition safety photocells so vehicle and pedestrian egress both stay clear during the work. Call (626) 649-4572 and we’ll come look at it.
Santa Ana wind events in fall and winter funnel through the San Bernardino Mountain pass and hit Highland’s foothill driveways harder than anywhere else in the Inland Empire. That wind repeatedly racks swing gates off their hinge posts and pulls post footings loose, which then throws the operator out of alignment. Hard water corrosion compounding the damage makes the failure appear sudden when it’s actually been building for months. We reset the post, reinforce the footing, and realign the operator so the seasonal cycle stops repeating.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Those are the brands Highland’s tract communities and custom foothill homes actually run, so we keep common parts in local stock instead of waiting on a warehouse order. Call (626) 649-4572 and we’ll tell you if we can fix it, usually before we even come out.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Highland with electric gate repair, done right since 2009.