Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Hicksville
Electric gate repair in Hicksville most often comes down to two things: a gate frame that’s out of square, and an operator board that no longer talks to its safety sensors. We see both constantly on the hamlet’s Levitt-era lots. Most repairs run $325-$575 when we’re dealing with one failed component, while full gate-frame replacement on the original 60-to-75-year-old galvanized steel usually lands between $1,200 and $2,400. Call (626) 649-4572 and a live person will answer, any hour.
We’ve been fixing gates since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Our Electric Gate Repair crews work throughout Hicksville from the Broadway corridor down to the streets off South Oyster Bay Road, and we know what the salt air, tight lots, and winter heave do to the steel and electronics on these properties. When we step onto a Hicksville yard, we’re not guessing at the problem. We’re looking for the same failure patterns we’ve corrected on hundreds of nearby homes.
Why Latch & Post Gate Repair Is Hicksville’s Preferred Electric Gate Repair Company
Hicksville homeowners tend to call us after a general contractor or fencing company has already been out once, because the problem came back. That’s not a knock on those companies. It’s just that most of them aren’t gate specialists. On a 1950s cape off Old Country Road, the gate that won’t latch is almost never just a latch. It’s a hinge post that heaved out of a shallow footing, which shifted the gate leaf, which pulled the latch out of alignment. You can replace the latch and be back in the same spot six weeks later.
We train our technicians on the equipment families on Hicksville driveways right now: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means the board, the motor, the photocells, and the limit switches all get diagnosed together as one system. Not one part at a time. Every repair carries the 365-Day Done Right Promise. If the fix isn’t right within a year, we make it right. No argument, no fine print.
Scheduling is coordinated from our New York City office, and crews serve Hicksville locally. Most repair calls in the hamlet get a same-day or next-day visit, and you’ll get a written price before any work begins. Every time. No exceptions.
Gate Opener Repair in Hicksville
Gate opener repair in Hicksville usually starts with an operator that runs but won’t stop cleanly, or trips its breaker, or ignores the remote entirely. On older homes here, the operator is often a LiftMaster or FAAC unit wired to a control board that predates modern UL 325 entrapment standards. The motor can still be fine. The board has simply stopped recognizing the safety photocells, so the gate faults out as a precaution. A board replacement on those legacy units typically runs $280-$460 in Hicksville, and the motor often gets years more life once the board is updated.
Legacy Control Board Replacement
We keep replacement boards for LiftMaster, FAAC, BFT, and Linear operators on our trucks when we roll into Hicksville, because these are the boards legacy installations here still run. When a board from the mid-2000s dies, we don’t patch it. We replace it with a current board that accepts modern photocells and edge sensors. That’s a $300-$500 job including labor on most of the operators we see in the hamlet.
Hinge Post And Operator Alignment
Before we touch an operator on an older Hicksville gate, we check the posts. If the gate leaf is dragging or the post has twisted out of plumb, the operator is working twice as hard as it should. We reset the post footing and shim the hinges to square, and only then do we tune the operator limits and force settings. Fixing the board without fixing the post is how a gate ends up needing repair twice in one season.
Automatic Gate Repair in Hicksville
Automatic gate repair in Hicksville covers everything from a keypad that won’t accept a code to a full slide gate that’s binding on its track after a nor’easter. The salt air and winter road spray on the hamlet’s grid of small streets corrode rack and pinion hardware and hinge welds noticeably faster than inland Long Island towns. A typical automatic gate service call in Hicksville runs $225-$495, with larger structural work like re-hanging a sagging swing gate going higher. You’ll always see the written number before we start.
Safety Sensor And Loop Detector Work
When an automatic gate reverses for no reason or refuses to close, the fault is often in the photocell wiring or the buried loop detector. Salt and moisture from Nassau County’s coastal air gets into these connections and degrades them over time. We trace the loop, replace the corroded splice or the sensor itself, and test the entrapment protection under load before we call the job done. Figure $180-$340 for most sensor and loop repairs in Hicksville.
Keypad And Remote Reprogramming
Keypads and remotes go out of sync more often when there’s been a power surge or a battery has died and taken the stored codes with it. We can usually reprogram an existing keypad or remote set in a single visit, and the cost stays low: $120-$220 for most Hicksville homes. If the keypad is beyond saving, we’ll replace it with a compatible unit and pair everything on the spot.
Trusted Brands We Service in Hicksville
We’re factory-trained on Viking, Ghost Controls, and DoorKing, plus the LiftMaster, FAAC, BFT, and Linear units that dominate Hicksville’s older housing stock. Because we work these brands every week, we stock common boards, sensors, and remote kits for Hicksville customers rather than ordering everything in. That keeps most repairs to a single visit. On a 2000s Viking swing arm off Broadway or a DoorKing slide operator near Cantiague Park, the right fix happens on the first trip because we already know the unit.
Common Electric Gate Repair Problems We See in Hicksville Homes
- Obsolete control boards that no longer accept safety photocells. A working motor still fails entrapment protection because the board can’t talk to modern sensors. The fix is a board retrofit, not a new motor.
- Hinge posts heaved out of shallow original footings. Nassau County’s freeze-thaw cycles push the old 1950s and 60s footings out of the ground, which binds the gate and faults the operator. We reset the post, then repair the panel.
- Corroded rack and latch hardware from road salt and coastal humidity. The same salt that eats car fenders on the Southern State sits on gate hardware all winter. We see pitted rack teeth and seized latch bolts inland repair crews rarely encounter.
- Undersized 2-inch posts on 2000s ornamental driveway gates. Many of the wrought-iron and aluminum gates installed during Hicksville’s recent ornamental boom were set without concrete bell footings. They sag and strip hinge welds within 10 to 15 years.
Pricing for Electric Gate Repair in Hicksville, NY
Most electric gate repairs in Hicksville fall into clear bands. Keypad and remote programming runs $120-$220. Sensor and loop repairs run $180-$340. Control board replacement on a legacy LiftMaster or FAAC operator runs $280-$460. Full gate-frame replacement on the original 60-to-75-year-old galvanized steel, including resetting the footings, runs $1,200-$2,400 depending on gate width and post condition. The written price comes before any work starts, and the price you see is the price you pay. Call (626) 649-4572 for an exact quote on your gate. Estimates are free.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on.
We Also Serve Cities Near Hicksville
Beyond Electric Gate Repair in Hicksville, our crews take calls across the Nassau border towns. We’re regularly in Levittown, Hempstead, Freeport, and Long Beach for the same post heave, board failures, and coastal corrosion we correct every week in Hicksville. If you’re just over the line, the same written-price rule and the same 365-Day Done Right Promise apply.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Hicksville
The opener is almost never the latching problem. On Hicksville’s older gates, the hinge post has usually heaved out of its footing, dropping the gate leaf and pulling the latch out of alignment. We correct the sag at the post, reset the footing if needed, and only then adjust the latch. That sequence is what keeps the gate working longer than one season. Call (626) 649-4572 and we’ll diagnose it on site.
Yes, in most cases. The obstacle is usually the original control board, not the photocells themselves. A board from the 1990s or early 2000s often lacks the inputs for modern monitored photocells and edge sensors. We replace the board with a current unit that accepts them, run the new wiring, and test the full entrapment protection system. It’s a standard job for us on Hicksville’s older operators, typically in the $300-$500 range.
It’s the freeze-thaw cycle. The hamlet’s original gates were set on shallow footings during the post-WWII buildout, and Nassau County winters heave those footings a little more each year. The post tips, the gate binds, and the panel gets blamed. We see it on nearly every 60-to-75-year-old chain-link gate we touch in Hicksville. Resetting the post usually costs less than replacing the gate leaf, and it’s the repair that actually holds.
It’s common in Hicksville, but it’s not how the gate should behave. A lot of the ornamental wrought-iron and aluminum driveway gates installed here since the 2000s were set on 2-inch posts with no concrete bell footings. Ten to fifteen years of wind load and freeze-thaw is enough to strip hinge welds and pull the gate off-plumb. We reset the post into a proper bell footing and re-hang the gate square. That’s a structural correction, and it’s the only way to stop the sag from coming back.
Yes. We service swing and slide gate operators across Hicksville, from Viking swing arms on South Oyster Bay Road properties to DoorKing slide units near the LIRR corridor. Slide gates here often need rack and pinion work from salt corrosion, while swing gates more often need post and hinge correction. Both are everyday jobs for our crews. Call (626) 649-4572 for a free estimate on either type.
Call Latch & Post Gate Repair for Electric Gate Repair in Hicksville
If your Hicksville gate won’t open, won’t latch, or keeps faulting out, call (626) 649-4572. A live person answers around the clock. We’ll schedule a visit, walk the gate with you, and hand you a written price before any work begins. Our technicians arrive in uniform, background-checked, and trained on the brands on your driveway. We lay drop cloths where we walk, put on shoe covers before we step inside, and send you a photo of the clean-up before we leave.
We can work around nap time if quiet matters. We choose pet-safe lubricants where there’s a choice. And if the repair isn’t right, the 365-Day Done Right Promise means we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Hicksville since 2009.