Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Galveston
Electric gate repair in Galveston usually comes down to one thing: salt. Our Electric Gate Repair team works on gates all over the island, and the failure patterns here are different from anywhere inland. Hinge pins seize, operator boards corrode, and post footings settle in sandy flood-zone soil. We diagnose the actual cause, quote a written price before any work starts, and get your gate cycling again. Need a Galveston tech today? Call (626) 649-4572 and a live person answers, day or night.
A gate that won’t open or close is a security problem and a daily annoyance. Our techs arrive in uniform, put on shoe covers before stepping inside, and lay drop cloths wherever tools go. We treat your Galveston home the way we’d treat our own.
Why Latch & Post Gate Repair Is Galveston’s Preferred Electric Gate Repair Company
Founded in 2009 as part of the Cedarwell family of independently owned and operated gate specialists, Latch & Post focuses on one trade: gates. Galveston homeowners call us because we understand what marine-grade corrosion does to a swing gate operator on a Victorian-era East End property and why a west-end beach cottage gate post shifts differently than a mainland post.
Every repair comes with the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fine print. That’s a real guarantee, and our Galveston customers hear it clearly because we put it in writing with the price.
Our Electric Gate Repair in Galveston customers also tell us they appreciate the small things: a background-checked tech who knocks before touching anything, pet-safe lubricants where there’s a choice, and a photo of the clean-up before we leave. Those are Cedarwell C.A.R.E. values, and they’re not upsells. They’re standard on every visit.
Electric Gate Motor in Galveston
Electric Gate Motor repair in Galveston almost always starts with the question of whether the motor itself has failed or whether the salt air has eaten the control board and terminals. A motor that runs intermittently, hums without moving the gate, or trips its breaker is often showing corrosion on the board rather than a dead motor. We test first, replace only what’s failed, and give you the written price before we open the housing.
Control Board and Terminal Corrosion
Salt-laden humidity on the island attacks operator control boards and terminal strips years before the motor windings or gearbox wear out. Green corrosion on the terminals causes intermittent faults that drive homeowners crazy, the gate works one cycle and dead the next. We clean and conformal-coat boards where that’s the right call, or replace them when the corrosion has gone too deep, and always re-torque every connection with stainless hardware.
Motor Replacement for Coastal Operators
When a Galveston motor does need replacement, we spec for the coast. A standard inland motor may last a few years here, which is why we recommend sealed or marine-rated options from brands like Linear and DoorKing for bayside and beachfront properties. A typical motor replacement in Galveston runs $450-$900 depending on the operator type and gate weight, and you’ll see the exact number in writing before we order a single part.
Gate Access Control in Galveston
Gate Access Control in Galveston means more than the keypad on a post. It’s the full loop: keypad, remote, safety sensors, and the board that ties them together. When an access system fails here, the culprit is usually water ingress at the keypad or oxidation at the board, not the buttons themselves. We diagnose the whole chain before replacing anything.
Keypads and Receivers Exposed to Salt Air
Galveston keypads live outdoors in saturated air, and the membrane switches and terminal screws corrode fast. A keypad that ignores a code or works only sometimes is usually full of salt-scale inside. We replace keypads with sealed units, weatherproof the wiring with dielectric grease, and program remotes from Viking, Ghost Controls, and DoorKing on the spot. A keypad replacement in Galveston typically runs $180-$320 including programming.
Entrapment Protection and Photocells
Automatic gates in Galveston require working entrapment protection, usually a photocell or edge sensor, and the sandy soil under a shifted post can knock those sensors out of alignment fast. If your gate reverses for no reason or refuses to close, the photocell alignment is often the cause. We realign and re-secure sensor posts, and where posts have settled we re-anchor the footing rather than just aiming the beam.
Trusted Brands We Service in Galveston
Our Galveston techs are factory-trained on the brands island families actually have: Linear, Viking, Ghost Controls, DoorKing, and more. We keep common boards, remotes, photocells, and hinges on the truck so a Galveston repair usually wraps up in one visit. If your existing operator is from a brand we service, we’ll repair it before we ever suggest replacing it. A new operator is only the answer when the old one is genuinely beyond saving.
Common Electric Gate Repair Problems We See in Galveston Homes
- Corroded hinge pins seizing and shearing. The gate sags because the galvanic corrosion at the hinge post has eaten the pin, not because the gate panel itself is failing. We replace pins with marine-grade stainless and re-hang the gate so it swings true.
- Operator boards fried by salt-laden humidity. Terminals go green, the gate works intermittently, and the homeowner blames the motor. We open the housing, show you the corrosion, and quote the repair before anything is replaced.
- Shifting post footings in sandy flood-zone soil. Pier-and-beam homes and west-end beach cottages often have ground-level gate posts that settle within a season. We re-pour footings, re-anchor posts with stainless lag bolts, and realign safety photocells.
- Debris damage after Gulf storms. Hurricane season wind and surge debris bend gate frames at the hinge welds and knock operators off alignment across whole neighborhoods. We reset geometry, weld or straighten where needed, and re-time the operator.
Pricing for Electric Gate Repair in Galveston, TX
Galveston pricing reflects the island’s corrosion reality. A gate motor replacement typically runs $450-$900, a keypad replacement $180-$320, and a hinge pin or post re-anchor job $150-$400 depending on how far the corrosion has spread. Control board repairs land between $220 and $480. Every job gets a written price before work begins, and the price includes the Cedarwell Care Promise: shoe covers, drop cloths, and a cleanup photo before we leave. Text or call (626) 649-4572 for a free estimate, and you’ll have an exact number in writing before you decide anything.
We Also Serve Cities Near Galveston
Our Electric Gate Repair in Galveston team also covers Texas City, La Marque, Hitchcock, and Dickinson. If your property is just off the island, the corrosion problems are similar but the soil and flood zone rules differ. We schedule across the area and always quote before work begins. Call (626) 649-4572 to book a Galveston-area visit.
Serving Galveston, TX - Our Local Coverage Area
We’re based in the Galveston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Galveston
Galveston’s position as a Gulf barrier island means every metal component is under constant attack from salt-laden air and humidity, with corrosion rates three to five times faster than Houston 50 miles inland. Hinge pins, lag bolts, operator boards, and terminal strips oxidize years before mechanical parts wear out. The fix is material-driven: stainless fasteners, sealed boards, and conformal coating. Call (626) 649-4572 for an exact quote on your Galveston operator.
In most cases, no. The Galveston Historic Preservation Committee often requires that original cast-iron and wrought-iron gates be repaired and re-coated in place rather than replaced with aluminum or vinyl, so replacement may not even be an option. We restore the corroded metal, re-coat it with marine-grade protection, and keep the historic character intact. Call (626) 649-4572 and we’ll assess what your district allows, free.
On Galveston’s flood-zone soil, the problem is usually the post. Ground-level hinge posts settling in sandy soil shift the whole gate out of alignment, causing the sag. And even when the post is stable, galvanic corrosion at the hinge pin is often the true failure point, not the gate panel itself. We re-anchor the post and replace hardware rather than selling you a new gate. Call (626) 649-4572 for a free assessment.
Yes. Automatic gates in Galveston must have working entrapment protection, usually a photocell or contact edge, that stops and reverses the gate if a person, pet, or vehicle is in the path. Sandy soil and shifting posts knock these sensors out of alignment all the time, which is why a gate that reverses for no reason needs a sensor check. We realign or replace sensors and test the full safety loop. Call (626) 649-4572 to schedule a safety inspection.
We service the brands Galveston families actually have, including Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, and BFT. If your operator can be repaired and will hold up to coastal conditions, we repair it. We only recommend replacement when the board or motor is beyond saving, and we quote both options in writing before any work starts. Call (626) 649-4572 for a free estimate on your specific operator.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Galveston since 2009.