Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Frisco
Electric gate repair in Frisco, TX typically runs $140-$360 for common fixes like sensor realignment, keypad replacement, or control board diagnostics. Most calls from Frisco neighborhoods like Starwood, Phillips Creek Ranch, and Newman Village get a technician out the same day or next morning. We know the gates in this city because we see the same failure patterns week after week: black clay heaving posts out of plumb, identical LiftMaster and Elite operators failing on the same street, and thermal stress from 100°F summers cooking circuit boards. Call (626) 649-4572 and a live person answers, any hour.
Frisco’s master-planned communities weren’t built one house at a time. They went up street by street, all at once, between roughly 2003 and 2015. That means the electric gate on your house is likely the same model, same vintage, and same wiring as the one three doors down. When one fails, the others aren’t far behind. We know that because we’ve replaced three or four identical failed gate motors within a few blocks in Frisco more times than we can count. This isn’t generic gate repair. It’s gate repair with Frisco’s specific building history in mind, which is why our Gate Installation - Frisco team knows exactly what your neighborhood needs.
Every gate comes down to two parts: the latch that holds it and the post that carries it. In Frisco, the post is usually the first thing to fail. Collin County’s expansive black clay swells after rain and shrinks during drought, and over a few seasons that movement heaves gate posts out of plumb. The operator gets blamed, but the post is the real problem. Our Electric Gate Repair team starts every diagnostic by checking the foundation before touching the motor.
Why Latch & Post Gate Repair Is Frisco’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been at this since 2009. That Cedarwell name comes with a specific way of working: written price before any work starts, shoe covers and drop cloths on every visit, a cleanup photo before the technician leaves, and a 365-Day Done Right Promise that covers every repair. If it isn’t right, we make it right. No argument about it.
Frisco customers care about two things in equal measure: the gate works and the house isn’t left a mess. We get that. Our uniformed, background-checked technicians follow the Cedarwell C.A.R.E. values on every job: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work. If you’ve got a sleeping toddler or a nervous dog, tell us. We’ll schedule around nap time and use quieter tools where we can.
Dispatch and scheduling run through our Dallas-Fort Worth office, but the crews who show up at your Frisco home are local to the area and know the streets. We don’t send someone who’s never seen Collin County clay before. We send someone who already knows what that soil does to a hinge post.
Gate Access Control in Frisco
Gate access control in Frisco means the electronic systems that decide who gets in: keypads, remote controls, intercoms, vehicle loop detectors, and the receiver boards that tie them together. In Frisco’s HOA-governed communities, these systems are often original to the house and now hitting the 10-to-20-year mark where circuit boards start failing from a decade of North Texas heat. When a keypad stops responding or a remote only works from 10 feet away, the fix usually starts with the receiver board or the antenna, not the remote itself.
Keypad and Remote Diagnostics
A dead keypad in Frisco is often a failed wiring harness, not a failed keypad. The heat inside a metal gate pillar on a July afternoon in Collin County reaches well past the rated temperature for those components. We test the circuit before we replace the part, and we tell you what we found and what the fix costs before we touch anything. Most keypad replacements in Frisco run $120-$240, and remotes reprogrammed or replaced run $40-$90 per unit.
Vehicle Loop Detectors
If your gate opens for the car leaving but not the car arriving, the loop detector buried in the driveway is usually the issue. In Frisco, black clay movement cracks the loop wire over time, especially where driveways cross expansion joints. We can test the loop, splice or replace the wire, and retune the detector. Expect $150-$280 for a typical loop detector repair in Frisco.
Commercial Gate Operator in Frisco
Commercial gate operators in Frisco serve the low-rise office parks, church campuses, private school entrances, and the occasional small HOA amenity gate scattered through the city’s newer commercial corridors near the Dallas North Tollway and Preston Road. These operators run more cycles per day than any residential gate and they fail differently: gears strip, capacitors blow, and limit switches drift. A commercial operator that cycles 200 times a day just wears out faster.
Slide Gate Operators
Frisco commercial properties with slide gates are especially prone to rack and pinion misalignment when the concrete pad shifts, which it does routinely on Collin County’s expansive clay. When the rack moves, the operator binds, the motor draws more current, and the thermal overload trips. We re-level the rack, realign the pinion, and check the limit switches. Slide gate operator repair in Frisco typically runs $280-$520 depending on parts.
Solar-Powered Operators for Rural Entrances
Just outside Frisco’s suburban core, there are still acreage entrances along Main Street and the rural roads heading toward Celina and Aubrey where mains power never made it to the gate. We mount solar gate openers with heavy-duty operators for wide farm gates and ranch entrances, sizing the panel and battery to the operator’s duty cycle. A solar retrofit on a 16-foot gate in the Frisco area usually runs $900-$1,600 complete, and it means not trenching power 300 feet down a driveway.
Trusted Brands We Service in Frisco
The gates in Frisco’s master-planned communities are dominated by a few names, and our technicians are factory-trained on the ones families actually own. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because so many Frisco streets were built with the same operator model, we keep common Viking, Ghost Controls, and DoorKing parts on the truck when we head to Frisco. That means fewer return trips and a faster fix. If we don’t have the part, we order it and get back out promptly, not whenever the supply house feels like it.
Common Electric Gate Repair Problems We See in Frisco Homes
- Posts heaved out of plumb by black clay: Collin County’s expansive soil swells and shrinks with every rain-drought cycle, and eventually the hinge post tilts. The gate binds, the operator strains, and the safety sensors misalign. The fix is re-setting the post in a deeper concrete pier, not replacing the motor.
- Identical operator failures on the same street: In Starwood, Phillips Creek Ranch, and Newman Village, entire blocks were built with the same gate operator in the same year. When one 2009 LiftMaster or Elite slide-gate motor fails, three neighbors usually call us within a month. We already know the part number before we arrive.
- Circuit board and wiring fatigue from heat: Frisco summers push past 100°F, and the inside of a metal gate pillar runs hotter than that. Circuit boards degrade, solder joints crack, and wiring insulation gets brittle. The gate starts working intermittently, and the problem isn’t always obvious until someone tests the board properly.
- Safety photocell faults from warped or dirty pickets: Aluminum pickets expand and warp in North Texas heat, and when they do, they can break the safety beam. The gate refuses to close or reverses for no apparent reason. Sometimes it’s a cleaning and realignment; sometimes the warped picket needs to be replaced.
Pricing for Electric Gate Repair in Frisco, TX
Here’s what Frisco homeowners should expect for common Frisco electric gate repairs: keypad or remote repair runs $120-$240, safety sensor realignment or replacement $90-$180, control board diagnostics and repair $150-$300, swing gate post realignment $250-$500, and slide gate motor replacement $700-$1,200 including the operator. Solar setups on rural acreage entrances run $900-$1,600 depending on the gate size and operator. Every single job gets a written price before any work begins. Always included, never a surprise. Call (626) 649-4572 for a free estimate, and you’ll know the exact number before we touch a single bolt.
What moves the price one way or another in Frisco is mostly the post. If the post is heaving, the repair is structural, not mechanical. We won’t know until we’re on site and can look at the foundation, but we’ll tell you what we see and what it costs before we do anything about it.
We Also Serve Cities Near Frisco
Our Electric Gate Repair in Frisco team also takes calls from nearby Prosper, Aubrey, Little Elm, and Celina. If you’re on the edge of Frisco or just past it, give us a call and we’ll let you know when a technician can be there. The same written price, the same C.A.R.E. values, the same 365-Day Done Right Promise.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Frisco
It changes the paperwork, not the repair itself. In Frisco communities like Starwood and Newman Village, HOA aesthetic approval is often required before any visible gate work. We’re familiar with that process and we’ll help you document what’s being replaced and match the finish so the approval goes through without a fight. The motor, keypad, and safety sensors are usually hidden inside the gate structure, so interior electrical repairs typically don’t need HOA review. Visible components, like a warped picket or a badly rusted post, might. We’ll tell you upfront which category your repair falls into. Call (626) 649-4572 and we’ll walk you through it.
Because Collin County’s black clay expands when it’s wet and the hinge post moves. The gate post shifts a little with each rain-drought cycle, and over a few seasons it’s out of plumb enough that the gate binds, the operator struggles, and the safety photocells misalign. Re-aligning the gate helps temporarily, but until the post is re-set in a deeper concrete pier below the active clay zone, the problem comes back. We do that repair regularly in Frisco, and the fix is structural, not electrical. Expect $250-$500 for a post re-set depending on the gate size.
Yes, and here’s why. Most Frisco subdivisions were built by a handful of large developers in compressed timelines from about 2003 to 2015, so an entire street often has the same gate operator model installed in the same year. When one reaches the end of its service life, the others on the same block aren’t far behind. We’ve replaced three or four identical failed LiftMaster or Elite slide-gate motors within a few blocks in Starwood and Phillips Creek Ranch. It’s a well-known pattern here, and the fix is usually a direct motor replacement with something more current. Call (626) 649-4572 and we’ll verify whether yours matches the pattern.
Yes. Solar gate openers are the standard fix for acreage entrances along Main Street and the rural roads heading north out of Frisco toward Celina. We size the solar panel and battery to the operator’s duty cycle, mount the panel where it gets full sun, and install a heavy-duty operator that can handle a wide farm gate or ranch entrance. A complete solar setup for a 16-foot gate from the Frisco area usually runs $900-$1,600, and it means not trenching electrical line down a long driveway. We’ve done this job several times in the last few years and it holds up through North Texas summers.
It’s about 50/50. Sometimes the sensor itself is dirty, sun-blinded, or failing, and sometimes the gate has shifted enough that the beam is misaligned, or a warped aluminum picket is breaking the path. In Frisco, warped pickets are a real problem because the summer heat expands the metal and over time it won’t go back to straight. The first test we run is alignment and cleanliness, then we check for physical obstructions. Sensor repair or replacement runs $90-$180. If the picket is the problem, that’s a different repair and we’ll show you exactly what’s happening before we quote it. Call (626) 649-4572 and we’ll figure it out.
Call Latch & Post Gate Repair for Electric Gate Repair in Frisco
When your gate won’t open or won’t close, or when it groans like it’s in pain every time it moves, call (626) 649-4572. A live person answers, day or night, no voicemail and no callback queue. We’ll ask what’s happening, schedule a technician for Frisco, and show up with shoe covers, drop cloths, and a written price before any work begins. Cody Beckman leads our team, and the 365-Day Done Right Promise backs every repair. If it isn’t right, we make it right.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Frisco since 2009.