Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Fort Worth
Electric gate repair in Fort Worth usually comes down to two things: the operator that moves the gate and the post that carries it. When the post has heaved out of plumb in black gumbo clay, the operator gets overloaded and burns out. That pairing is the single most common failure we see on ranch-lot and acreage entrances around Fort Worth, and it’s exactly the kind of problem our Electric Gate Repair team corrects before it kills another motor. If your gate is stalling, dragging, or refusing to reverse, call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Fort Worth’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair was founded in 2009 as part of the Cedarwell family of independently owned and operated gate specialists. We work exclusively on gates: repair, installation, and electric operation. That narrow focus matters on a Fort Worth ranch gate where the operator is fighting a 400-pound panel of tubular steel that has already shifted on its posts. We don’t do general handyman work, and we don’t guess at gate hardware.
Fort Worth homeowners call us because our technicians are background-checked, uniformed, and factory-trained on the brands families actually own here: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The tech who arrives at your gate understands agricultural hardware, not just ornamental iron. That’s the difference between a repair that holds and one that fails again in six months.
Our dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, which means crews reach Fort Worth neighborhoods quickly without the delays of a remote call center. A live person answers every call, 24 hours a day, 7 days a week. No voicemail, no callback queue.
Gate Opener Repair in Fort Worth
Gate Opener Repair in Fort Worth typically runs $180 to $650 depending on whether we’re rebuilding the existing operator, replacing a control board, or installing a new unit sized for the gate’s weight and span. On acreage west of I-35W toward Benbrook, the operator is often the victim of a post problem rather than the source of it. The clay heaves, the post tilts, the panel drags, and the motor stalls or burns out trying to move a gate that no longer swings true.
What We Check Before Replacing an Opener
We measure the gate panel’s weight and length before quoting an operator. A 14-foot ranch pipe gate needs a different operator than a 10-foot ornamental iron driveway gate. In Fort Worth’s black gumbo soil, we also check the post depth and plumb before recommending any motor work. If the post is moving, a new operator is wasted money.
Sizing Operators for Long Driveways
Long driveway runs on rural Fort Worth properties often mean the gate sits far from the house and far from grid power. We regularly install and repair solar-powered operators on gates where trenching electric lines would cost thousands. A properly sized solar kit with battery backup keeps a heavy ranch gate cycling through North Texas winters without running a power line down a gravel drive.
Automatic Gate Repair in Fort Worth
Automatic Gate Repair in Fort Worth covers the full chain that opens and closes your gate: the opener, the safety sensors, the keypad, the remote receiver, and the control board. A typical safety sensor replacement runs $150 to $300, and a full operator replacement on a wide ranch entrance runs $800 to $2,400 depending on gate weight, span, and whether we’re adding solar or battery backup. Every repair starts with a written price you approve before we touch anything.
Safety Reversal and Photocells
If your gate no longer reverses when something is in the way, that’s a safety problem. The photocells must be aligned and the control board’s force setting must be matched to the gate’s travel. That’s equipment measured and adjusted on-site, never guessed from a photo.
Rebuilding After an Ice Storm
Fort Worth ice storms seize operators, shatter plastic slide-gate rollers, and snap spring-loaded hinges when water infiltrates and freezes. After a hard freeze, we see a wave of automatic gate failures across the metro. We stock the common parts for DoorKing and Elite operators locally, which usually means faster turnaround for Fort Worth customers.
Trusted Brands We Service in Fort Worth
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s the full field on Fort Worth driveways, from the LiftMaster swing operators on master-planned subdivisions near Alliance to the Viking and Ghost Controls solar kits on horse properties off gravel roads near Benbrook Lake. When we service a DoorKing or an Elite, we’re working on a brand we know well enough to diagnose on the first visit. Keeping parts stocked locally for these Fort Worth operators shortens the repair window.
Common Electric Gate Repair Problems We See in Fort Worth Homes
- Heaved posts from black gumbo clay. The active clay zone swells and shrinks with every wet-dry cycle, tilting gate posts and racking wide pipe gates out of plumb. A post set without concrete deep enough to clear the shrink-swell layer fails fast and takes the operator with it.
- Operator burnout from a dragging panel. When a ranch gate starts scraping or binding because its posts have shifted, the motor strains on every cycle. A strained motor dies sooner than a properly balanced one, and replacing the operator without fixing the post guarantees a callback.
- Ice storm damage to mechanics. Frozen water inside hinges, rollers, and operator housings expands and cracks plastic parts. Spring-loaded hinges on slide gates are especially vulnerable when a Fort Worth freeze hits.
- Summer heat degrading seals and track. 100°F-plus days warp aluminum slide-gate track and harden rubber seals on hydraulic operators. Gates that ran fine in spring start binding by August, often before the manufacturer’s rated service interval would suggest a problem.
Pricing for Electric Gate Repair in Fort Worth, TX
Most electric gate repairs in Fort Worth run between $180 and $650 for component-level work: safety sensor replacement, control board swap, remote reprogramming, or limit switch adjustment. Full operator replacements start around $800 and go up from there based on gate weight, span length, and whether we’re adding solar panels and a battery bank for a rural entrance without grid power. A post reset or realignment, which is common on black gumbo lots near Benbrook Lake, adds to the total. You’ll see every dollar in writing as a firm quote before any work starts, and the 365-Day Done Right Promise covers everything we do.
We Also Serve Cities Near Fort Worth
Along with Electric Gate Repair in Fort Worth, our crews take care of homeowners in Haltom City, North Richland Hills, Hurst, and Kennedale. If your property sits just outside the city line, call us anyway. Schedules are built to keep nearby jobs grouped so we can get to you without a long wait.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fort Worth
Your gate is almost certainly sitting on Blackland Prairie expansive clay, the local black gumbo that swells and shrinks with every wet-dry cycle. The soil moves, the post tilts, and the gate panel racks out of alignment. If the post was set without concrete deep enough to clear the active clay zone, the repair will never hold. The fix is a post reset to the correct depth, not just a re-leveling. Call (626) 649-4572 for someone who knows to check post depth before quoting.
Yes. We work on solar gate openers regularly for horse properties and small acreages west of I-35W where trenching a power line down a long driveway isn’t practical. We test the panel output, battery health, and charge controller, then size a replacement that keeps your gate cycling through North Texas winters and the hot summers that drain weak batteries. Written pricing comes before any work.
Yes, absolutely. A gate that won’t reverse on obstruction is a serious safety issue, especially for homes with kids and pets. We check the photocell alignment, the control board’s force settings, and the edge sensors. The repair is usually quick and affordable, but it’s not something to postpone. Call (626) 649-4572 and we’ll walk you through it.
We do. Fort Worth has a higher concentration of heavy-duty pipe and tubular-steel ranch gates than almost any major metro, and those gates need technicians who know agricultural gate hardware, not just ornamental iron. Our techs are trained on Viking, Ghost Controls, and DoorKing ranch-style operators and understand the weight and span demands of a real farm entrance.
Ice storms damage operators by seizing them with frozen water, shattering plastic slide-gate rollers, and snapping spring-loaded hinges when trapped water freezes and expands. Fort Worth gets hit harder than Dallas because of slightly colder exposure on the open prairie. After a freeze, we see a wave of failures. If your gate stopped working after ice, call (626) 649-4572. We’ll diagnose it and give you a written price before touching a bolt.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Fort Worth and the surrounding metro. Founded in 2009 as part of the Cedarwell family, we focus on one trade: gates. Repair, installation, and electric operation. That’s it.