Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Ennis
If your automatic gate in Ennis won’t open, grinds mid-travel, or has stopped responding to the remote, you need someone who understands Blackland Prairie soil nearly as well as gate hardware. Our Electric Gate Repair team works on Ennis properties every week, from in-town homes near Highway 34 to acreage ranches off FM 85. Most jobs are diagnosed and quoted the same day, and you’ll see the exact price in writing before any work starts. Call (626) 649-4572 and a live person answers, around the clock.
Why Latch & Post Gate Repair Is Ennis’s Preferred Electric Gate Repair Company
Most electric gate problems in Ennis trace back to the same thing: black gumbo clay moving under the posts. When the soil shrinks in summer and swells after rain, posts tilt. The gate drags. The opener strains. A technician who doesn’t know this will adjust the hinges, charge you for it, and be back in three months doing the same job. We start every diagnosis in Ennis by probing post depth and checking the concrete collar for cracking or uplift before we touch a hinge or a limit switch.
We’re a Cedarwell-family gate specialist, founded in 2009, and our technicians show up in uniform, background-checked, and trained on the brands Ennis homeowners actually run: Viking, Ghost Controls, DoorKing, and Elite among them. Our crews dispatch from the brand’s Dallas-Fort Worth office and serve Ennis locally. No call center maze, no voicemail at 2 a.m. when your gate is stuck open and your dog is loose.
The 365-Day Done Right Promise covers every repair. If the fix doesn’t hold through the next wet-dry cycle, we make it right. No argument, no fine print. And when we step onto your property, we treat it like our own: shoe covers, drop cloths inside the house, a photo of the clean-up before we leave.
Gate Opener Repair in Ennis
Gate Opener Repair in Ennis usually means one of three things: a burned-out motor or stripped drive gear on a heavy farm gate, a control board damaged by an Ellis County ice storm, or a battery that quit after too many cloudy days on a solar setup. Most opener repairs in Ennis run $175-$380, depending on whether we’re replacing a gear, a board, or a full motor assembly. You’ll get the number in writing before we order a single part.
Motor and Drive Gear Replacement
Operators straining against a 12 or 14-foot pipe gate burn through rack and pinion gears faster than the manual says they should. We see it constantly on ranch properties between Ennis and Waxahachie. If the motor hums but the gate doesn’t move, the gear is usually stripped. We stock common drive gears for Viking and Ghost Controls units locally, so the repair often happens the same visit.
Solar Charging System Checks
Many Ennis acreage entrances have no mains power within 200 feet. Solar is the practical answer, but batteries degrade, and North Texas ice storms leave panels covered and batteries drained. When a solar-powered opener goes dead after a storm, the fix is often the battery or a regulator, not the operator itself. We test the full charging loop before recommending any replacement.
Automatic Gate Repair in Ennis
Automatic Gate Repair in Ennis covers the whole system, not just the operator: hinges, post alignment, safety sensors, keypads, loops, and the control board that ties it all together. A full system diagnosis in Ennis typically costs $325-$650 when it includes post re-setting or board replacement. If the gate moves but the safety edge doesn’t reverse it, that’s a sensor job, usually on the lower end of that range.
Post Alignment and Footing Repairs
The hinge post is the foundation of every automatic gate. On Ennis black clay, the footing heaves upward in summer, cracks, and lets the post lean. When that happens, the gate sags, the opener labors, and the sensors go out of line. We re-set posts, re-pour concrete collars, and only then adjust the hardware to match the newly plumb post. Anything less is a temporary fix on gumbo soil.
Control Board and Safety Sensor Diagnostics
Control boards fail quietly. One day the gate opens fine; the next it won’t respond to the remote, or the keypad flashes an error. DoorKing and Elite boards are picky about voltage dips, which happen often in rural Ennis when the grid fluctuates. We test incoming voltage first, then the board, then the wiring. That sequence saves Ennis homeowners from paying for a board replacement when a power supply was the real culprit.
Trusted Brands We Service in Ennis
We’re factory-trained on the equipment families here actually use: Viking and Ghost Controls for ranch and rural gates, DoorKing and Elite for ornamental iron driveway systems in newer subdivisions along the I-45 corridor. Because we work these brands daily, we keep common replacement parts accessible for fast turnaround in Ennis. No waiting three weeks for a specialty board to ship from a distributor. If the part exists in our Dallas-Fort Worth inventory, it’s on a truck to your gate the same day.
Common Electric Gate Repair Problems We See in Ennis Homes
- The gate drifts out of alignment every few months. On Blackland Prairie clay, the post has almost certainly moved. The concrete collar cracks and lifts during dry spells, tilting the post and dragging the gate. We fix the footing first, then the alignment.
- The opener runs but the gate barely moves. Wide 12-16 ft pipe livestock gates are heavy. Undersized operators strip their drive gears or burn out motors. We match the operator to the gate’s actual weight and span, not the brochure rating.
- The gate works on some remotes but not others. That’s usually receiver or programming drift, but sometimes it’s a failing control board dropping signal codes. We test the board’s memory before blaming the remote.
- The gate stops halfway and reverses. Misaligned safety sensors or an obstruction caused by a leaning post. After rain re-expands the clay, posts shift suddenly, and sensors that were fine yesterday are now reading the gate itself as an obstacle.
Pricing for Electric Gate Repair in Ennis, TX
Here are straight numbers for Ennis, because you shouldn’t have to guess: a gate opener motor or gear replacement runs $175-$380, a control board replacement runs $220-$450, a safety sensor pair replacement runs $120-$200, a keypad replacement runs $90-$180, and a full system diagnosis with post re-setting runs $325-$650. The exact figure depends on your gate’s width, weight, and whether the post itself has moved. You’ll see the exact price in writing before any work begins, every visit, no pressure to accept. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Ennis
Our gate technicians regularly serve Ennis and the surrounding communities, including Waxahachie, Red Oak, Wilmer, and Lancaster. If your property sits just outside the city limits or along the county roads between these towns, we’re already familiar with the roads, the soil, and the gate hardware out there. Give us a call and we’ll get you on the schedule.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Ennis
Your gate post is almost certainly moving, not your hardware. Ennis sits on Blackland Prairie black clay that shrinks in summer and swells after rain, lifting and cracking the concrete collar around your hinge post. When the post tilts, the gate drags or drifts out of alignment. We re-set the post and re-pour the footing before adjusting any hinge, so the fix holds through wet-dry cycles instead of reverting in three months. Call (626) 649-4572 to have a technician check your footings.
Yes. Solar-powered operators are the standard answer for long Ennis driveways where running mains power costs more than the gate itself. We size the panel and battery bank for real north Texas conditions, including the cloudy stretches after Ellis County ice storms. The key is matching the operator to the gate’s weight and width, not undersizing it and replacing gears every year. Solar automation runs roughly $1,200-$2,800 installed, depending on the gate. Call (626) 649-4572 for an exact number.
A safe automatic gate should stop and reverse when a safety sensor or edge detects resistance, and it should never close on a person, pet, or vehicle. The sensors need to be aligned, the edge strips must be intact, and the operator’s force settings should be tuned so the gate reverses gently, not with full motor torque. On a wide ranch gate, that force tuning matters doubly, because the gate’s momentum is enormous. We test safety edges and sensors on every repair. If yours haven’t been checked in a year, call (626) 649-4572 for a safety inspection.
Yes, and it’s a common one on the wide pipe gates common around Ennis ranches. When a 14-foot gate sags in the middle, the operator has to push against gravity as well as momentum, and that extra load strips gears and burns motors. The fix is a sag correction: re-tensioning the gate frame, sometimes adding a truss rod or corner gusset, then re-tuning the operator. It’s less expensive than replacing a motor every year. Call (626) 649-4572 and we’ll quote the sag correction in writing.
Yes. Heavy 12-16 ft pipe livestock gates on ranch and acreage properties are a big part of what we do around Ennis. We re-set moving posts, correct sag, replace worn hinges, and match or upgrade operators to handle the gate’s actual weight. We were called out to a ranch property off FM 85 where a 14-ft pipe swing gate was dragging in the dirt on every cycle. The hinge post footing had cracked and lifted during a summer dry spell. We re-set the post, re-poured the collar, corrected the sag, and re-tuned the LiftMaster operator arm. Two full wet-dry cycles later, it still swings clean. Call (626) 649-4572 for your ranch gate.
If your automatic gate is giving you trouble in Ennis, don’t wait for it to fail completely with the gate stuck open or shut. Call Latch & Post Gate Repair at (626) 649-4572. A live person answers, and we’ll give you a written price before any work begins.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Ennis and the surrounding Ellis County area.