Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Carrollton, TX
Latch & Post Gate Repair is a Carrollton gate company focused on one trade: gates that sag, stick, refuse to open, or need full replacement. Carrollton jobs are different from the rest of the metro because most of the city’s gate inventory was installed with the 1980s and 1990s HOA subdivisions, which means a lot of original operators and ornamental iron gates are reaching the end of their service life at the same time. If your gate won’t latch or your opener has gone quiet, call (626) 649-4572 and a live person answers every time.
Why Carrollton Homes Are Different
Carrollton sits on Blackland Prairie clay, and that clay moves. Wet winters make it swell; triple-digit summers bake it into cracked, shrunken soil. Gate posts set in that soil heave and tilt over the years, which is why so many Carrollton gates sag at the latch even when the hinges look fine. We align the post first, then tune the gate around it. Skip that step and the new hinges or operator fight the same lean within a season.
The housing stock splits into two distinct groups. South Carrollton has 1950s and 1960s ranch homes, many with narrow driveway gates and decades of improvised fixes. Central and north Carrollton are dominated by 1980s and 1990s master-planned communities where HOA rules often required uniform cedar privacy fences or ornamental iron gates. Those gates are now 25 to 35 years old. Original swing-arm operators from the early-1990s are common, especially LiftMaster and Linear units still on factory wiring. Their logic boards are mostly discontinued, so repair usually means replacement, and the post realignment happens at the same visit.
Cedar gates in Carrollton absorb years of North Texas sun and humidity swings. We see panels warped just enough to bind on the latch side, and UV-damaged stain that flakes off in sheets. Metal gates expand in summer heat enough to throw travel limits off. It’s predictable work once you know the soil and the housing stock, and our technicians know both.
Our Main Carrollton Services
Most Carrollton homeowners call us for one of two reasons: a gate that won’t close properly, or an opener that stopped responding. Here’s how each works in Carrollton specifically.
Gate Repair in Carrollton
Gate repair in Carrollton usually starts with the post, not the hinge. The clay soil shifts posts out of plumb, which drags the gate out of alignment and puts strain on every moving part. We remove the post from its shifting footing when needed, reset it in compacted base, then rehang and tune the gate so the latch meets the post cleanly. For cedar gates with warped panels, we straighten or replace the affected boards and match the existing stain as closely as the original allows. The full scope, including reset depth and any board replacement, goes into a written quote before we touch anything. Details on what a Carrollton repair visit includes are on our Gate Repair in Carrollton page.
Gate Installation in Carrollton
New gate installation in Carrollton has to account for the same clay. We set posts deeper than the frost line with a compacted gravel base that drains, because a post set in shifting clay will repeat the old failure within two years. Choices of cedar, ornamental iron, or steel frame get priced differently against your HOA’s standards. Some Carrollton HOAs ask for architectural approval before a replacement gate goes in; we work with whatever your neighborhood requires and time the install around it. See the full process here: Gate Installation in Carrollton.
Electric Gate Repair in Carrollton
Electric gate repair in Carrollton is often a story of age and heat. Original operators from the 1990s run on discontinued logic boards, so when the board fails, the efficient fix is a full operator swap matched to the existing arm or slide track. Summer heat also expands metal gates and throws travel limits off, so we re-teach limits after every component change. When a Carrollton operator keeps tripping the safety reverse, it’s usually a post lean shifting the gate against the sensor path, not a sensor setting. See how we diagnose and fix these systems on our Electric Gate Repair in Carrollton page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Carrollton
We service FAAC and BFT hydraulic operators, Linear and Viking control boards and motors, and the LiftMaster and Mighty Mule units common across Carrollton’s older subdivisions. Parts for the current-generation models are stocked in our DFW service vehicles; discontinued boards get quoted with a full-operator replacement option rather than a drawn-out search for obsolete parts. See the full list on our brands page.
Pricing for Gate Company in Carrollton, TX
| Service | Typical range in Carrollton |
|---|---|
| Gate latch replacement | $95-$185 |
| Hinge replacement (pair) | $120-$240 |
| Post realignment and reset | $250-$600 |
| Cedar gate panel straightening or board replacement | $180-$420 |
| Ornamental iron gate weld repair | $150-$350 |
| Single swing gate operator replacement | $750-$1,400 |
| Slide gate operator replacement | $1,200-$2,300 |
| Control board replacement | $200-$500 |
| Safety sensor or edge replacement | $140-$320 |
| New standard cedar or iron single gate | $900-$2,500 |
| Full driveway gate system with operator | $3,000-$7,500 |
Post realignment is the most common cost driver in Carrollton, because the clay soil here heaves more than in the sandier counties east of Dallas. A gate that looks like a simple hinge fix often hides a post that’s drifted out of plumb, and resetting it correctly takes more labor than the hinge itself. You’ll see the exact number in writing before any work starts, and that number doesn’t change unless you approve added scope.
Neighborhoods We Serve in Carrollton
We work throughout Carrollton, from the older ranch-home streets of south Carrollton through the HOA subdivisions around Josey, Hebron, and the Greenbelt. Most jobs are scheduled within a day or two, and urgent calls like a gate stuck open on a pet yard get same-day attention when we have a crew in the area.
- South Carrollton ranch-home neighborhoods
- Neighborhoods around Josey Lane and Hebron Parkway
- Subdivisions near the Greenbelt and Elm Fork
- Central Carrollton HOA communities off Rosemeade and Marsh
- North Carrollton around Hebron and Old Denton Road
Service Area – Cities Near Carrollton
Our DFW office dispatches Carrollton crews locally, and we also serve the neighboring cities of Addison, TX, Coppell, TX, Richardson, TX, and Lewisville, TX. If you’re on the edge of Carrollton near the Addison or Coppell line, call and we’ll confirm which crew can reach you fastest.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Carrollton
For a gate stuck open or a pet that could get out, we schedule same-day when a crew is in the area, and our live phone line runs 24/7. Call (626) 649-4572 and a person answers, not a callback queue.
Many central and north Carrollton HOA communities require architectural approval before a gate style or material change, especially for front-facing driveway gates. We work from your HOA’s written guidelines and time the work around their approval process. Repairs that match the existing style usually don’t trigger review.
Yes. The clay swells and shrinks with every wet-dry cycle, which pushes posts out of plumb and causes the sag and operator strain we see across Carrollton. That’s why we check the post before quoting any hinge or latch work, and reset it in compacted base when the lean is the root cause.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick