Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Coconut Creek
Electric gate repair in Coconut Creek usually costs between $185 and $650 depending on what failed, and most motor and control board fixes are done in a single visit. We work in Wynmoor Village, Century Village, and the single-family subdivisions along Wiles Road and Sample Road, where gate failures tend to follow a pattern: high-cycle wear at the big communities, corrosion from afternoon thunderstorms everywhere else. Call (626) 649-4572 and a live person answers, day or night.
Why Latch & Post Gate Repair Is Coconut Creek’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is a Cedarwell-family gate specialist, and that focus matters in Coconut Creek. We don’t paint houses or unclog drains. Gate repair, gate installation, and electric gate repair are what we do, and the technicians who show up at your community gate are background-checked, uniformed, and factory-trained on the operators Coconut Creek actually runs – LiftMaster and DoorKing at Wynmoor and Century Village, FAAC and BFT on newer villa communities, Linear and Viking on the older slide gates. Every job starts with a written price before we touch anything, and every job ends with shoe covers removed, drop cloths folded, and a photo of the clean-up before we leave.
What our Coconut Creek customers notice most is what they don’t notice: no voicemail when they call at 6 a.m. before morning exit rush, no surprise invoice after the board approves the repair, no gate left half-open because a part was “on order” without a date. The 365-Day Done Right Promise backs every repair and installation. If the gate isn’t right, we make it right. No argument, no fine print. That’s why HOAs and property managers keep our number on their vendor sheets.
Dispatch and scheduling for Coconut Creek are coordinated from our Miami (South FL) office, with crews serving Coconut Creek locally. For faster scheduling inside the big communities, our techs already know the board approval process, the vendor access requirements, and the quiet hours at Wynmoor and Century Village.
Commercial Gate Operator in Coconut Creek
A Commercial Gate Operator in Coconut Creek is the motor-and-gearbox assembly that drives the entry and exit lanes at the city’s large gated communities, and in this market it’s a different animal than a residential opener. Wynmoor Village and Century Village together generate some of the highest daily residential gate traffic in Broward County, so their commercial-grade operators cycle more in a month than most single-family slide gates do in a year. That duty cycle is why 30-to-50-year-old first-generation operators here need board-approved replacement rather than a residential-style patch.
High-Cycle Wear at the Big Communities
We see a pattern at Wynmoor and Century Village: the operator runs fine for years, then starts tripping its overload during morning exit rush, when hundreds of residents are trying to leave at once. The motor gets hot, the control board’s thermal protection kicks in, and the gate stops mid-cycle. Replacing a pinion gear or resetting a loop detector gets the lane open again, but at this duty cycle the honest fix is often a full operator replacement with a unit rated for continuous cycling.
Board-Approved Repairs Done on Schedule
When an HOA board needs to approve the work, we document the failure, quote the repair in writing, and clear the deadline. Our tech was called to a Wynmoor Village entry lane after a LiftMaster commercial slide gate operator tripped its overload every morning exit rush. The rack and pinion was worn and the loop detector was failing to hold the gate open, so we replaced the pinion gear, reset the loop detector, and verified the safety photocell before the board’s morning deadline. Because the board needed same-day authorization on a community-approved vendor basis, we documented the repair and cleared the lane before the next exit cycle.
Gate Opener Repair in Coconut Creek
Gate Opener Repair in Coconut Creek typically means diagnosing why the motor runs but the gate doesn’t move, or why the remote stopped working overnight. Most opener repairs run $185 to $420 here, with control board replacement on the higher end for DoorKing and FAAC units. The inland South Florida humidity is rough on electronics – afternoon thunderstorms roll through almost daily in summer, and circuit boards sitting in metal enclosures sweat condensation, corrode, and fail.
What Usually Fails on a Coconut Creek Opener
Motors burn out slowly in this climate. Bearings get stiff from humidity. Control boards corrode at the relay. Capacitors swell in the heat. We test each component before replacing anything, because a bad capacitor at $40 deserves a different fix than a dead board at $380. You see the price before we start, and we don’t upsell parts that still work.
Keeping Quiet for Families Sleeping Nearby
We know a gate opener running at 6 a.m. wakes more than just the guard. Our techs use quiet tools on early-morning calls and schedule around nap time when it matters. We also choose pet-safe lubricants where there’s a choice – because the kids’ dog is probably sleeping ten feet from the motor.
Trusted Brands We Service in Coconut Creek
We’re factory-trained on the gate operators Coconut Creek communities actually run: FAAC, BFT, Linear, and Viking for residential and villa gates, plus DoorKing and LiftMaster for the commercial lanes at Wynmoor and Century Village. Because we focus on these brands, our techs carry the common parts – capacitors, relays, limit switches, loop detectors – in the truck. That means faster turnaround for Coconut Creek customers and fewer second trips. If your operator predates the internet and the part number has faded off the motor plate, we can usually source it, but honestly, a 40-year-old operator is often cheaper to replace than to keep patching. Either way, you’ll see a written price before any work begins.
Common Electric Gate Repair Problems We See in Coconut Creek Homes
- Operators failing during morning exit rush at Wynmoor and Century Village: high cycle counts wear out control boards and motors far faster than residential slide gate equipment, and failures almost always happen when the gate is busiest. A single lane down backs up hundreds of residents.
- Corrosion from inland South Florida humidity: daily afternoon thunderstorms put moisture into motor enclosures and control boards, corroding terminals and relays. Boards that sat in dry climates for 20 years fail here in 5 to 7.
- Post shift after hurricane season: gate posts set in the soft, sandy-marl soil common to western Broward lean or shift after heavy storm saturation, which throws automatic gates out of alignment. A sagging swing gate usually fails at the hinge post, not the panel.
- Parts for first-generation electromechanical operators: the big condo and villa communities built from the late 1960s through the 1980s still run original operators, and sourcing parts for 30-to-50-year-old Linear, FAAC, and BFT units is slow. Often the board’s cheapest path is a full operator replacement.
Pricing for Electric Gate Repair in Coconut Creek, FL
Here’s what you can expect to pay in Coconut Creek, and yes, you’ll see the exact number in writing before we touch anything. Gate opener motor replacement runs $265 to $490. Control board replacement runs $320 to $650 for DoorKing, FAAC, or LiftMaster boards, depending on the model. Safety sensor (photocell) repair or replacement runs $120 to $240 per pair. Keypad and remote control programming runs $90 to $180. Full commercial operator replacement for the big community lanes runs $2,800 to $6,500 installed, quoted per gate after we see the existing equipment and duty cycle. Most standard gate-latch replacements run between $140 and $260 – and you’ll get the exact figure in writing before we start. Estimates are free. Call (626) 649-4572 with your gate symptoms and we’ll give you a realistic range over the phone.
We Also Serve Cities Near Coconut Creek
Latch & Post Gate Repair serves Electric Gate Repair clients throughout northern Broward County. If you’re in Coconut Creek, we also cover Margate, Pompano Beach, Coral Springs, and Deerfield Beach with the same written-price, clean-up-photo, 365-Day Done Right Promise on every visit. Call the number above and we’ll route you to the right crew.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Coconut Creek
Morning exit is when the gate cycles the most, and that’s when heat, load, and wear all peak at once. Hundreds of vehicles pass through in under an hour, the motor runs near its thermal limit, and any weak component – a motor, a control board relay, a loop detector – fails under that peak load rather than during the quieter afternoon. That’s why commercial-grade communities like Wynmoor Village and Century Village need operators rated for continuous cycling, not residential-duty units. Call (626) 649-4572 and we’ll assess whether your operator is the right rating for your lane.
Yes. We coordinate directly with HOA boards and property managers, provide written quotes for board review, and document the repair with photos before and after. If you’re a seasonal resident away from Coconut Creek, the board or your property manager can authorize the work, we complete it, and you get the documentation emailed to you. No one has to be home for the gate to get fixed.
Sometimes, and we’ll tell you straight if it’s worth it. We can source or repair components on many first-generation Linear, FAAC, and BFT units, but at 30 to 50 years old, parts availability is slow and the failure rate after repair is high. In most cases, the board’s cheapest long-term answer is a full operator replacement with a modern unit that meets UL 325 entrapment standards. Either way, you’ll see the numbers in writing before you decide.
Almost always the hinge post. In Coconut Creek’s soft, sandy-marl soil, a post that wasn’t set deep enough, or was set before decades of hurricane-season saturation, slowly leans or shifts. The panel itself rarely bends; the post moves and the gate follows. We fix the post – not the panel – and realign the operator so the gate opens and closes square again.
Yes, and it’s non-negotiable. UL 325 is the safety standard that requires entrapment protection on automatic gate operators – photocells, edge sensors, and force settings that prevent the gate from closing on a person, a pet, or a car. For community gates like Wynmoor and Century Village, it’s also a liability issue for the HOA. We verify and repair safety sensors on every gate we touch, and we’ll tell you in writing if your operator doesn’t meet current UL 325 requirements. Call (626) 649-4572 for a free assessment.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Coconut Creek since 2009.