Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Brooklyn
Electric gate repair in Brooklyn usually means one of two things: a motor that stopped responding, or a gate that drags, sags, or jams halfway through its cycle. Most jobs we see in Brooklyn take a single visit and run between $275 and $680, depending on whether we are replacing a control board, a hinge set, or an entire operator. We know this borough’s gates better than most because so many of them are original ironwork hanging on brownstones built before 1930. If your gate is stuck open, closed, or somewhere in between, call (626) 649-4572 and a live person will answer, day or night.
Why Latch & Post Gate Repair Is Brooklyn’s Preferred Electric Gate Repair Company
We are part of the Cedarwell family and have been repairing gates since 2009. The work we do in Brooklyn tends to be more complicated than what you would find in a newer suburb, because so many of the gates here are a century old and carry landmark review requirements. Our technicians understand that a gate on a landmarked block in Park Slope or Brooklyn Heights is not just a mechanism. It is part of a protected streetscape, and the fix has to respect that.
Brooklyn homeowners tell us the same thing again and again: they want a written price before we touch anything, and they want to know their floors will stay clean. We do both. Shoe covers and drop cloths are standard on every visit, and before we leave we will show you a photo of the clean-up. Our technicians are background-checked and uniformed, and they operate under the Cedarwell C.A.R.E. values: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, and Explain the price before the work.
Every job is backed by the 365-Day Done Right Promise. If the repair is not right, we make it right. No argument, no fine print.
Electric Gate Motor in Brooklyn
Electric Gate Motor replacement in Brooklyn is the most common repair we handle because coastal salt air and freeze-thaw cycling punish motor gears and control boards harder here than almost anywhere else in the state. When the motor in a swing or slide gate fails, the gate usually stops mid-travel or refuses to respond to the remote. On older brownstones, the motor is often a legacy LiftMaster, FAAC, or BFT unit that has been out of production for years. A typical electric gate motor swap in Brooklyn runs $450 to $680, and you will see the exact number in writing before any work begins.
Motor Mounts and Post Alignment
A motor cannot work correctly if the post it mounts to has shifted. In Brooklyn, masonry gate posts heave with the freeze-thaw cycle, and a motor bolted to a leaning post will chew through gears. We check post plumb before we install anything.
Retrofits on Legacy Operators
Some older operators can accept a new motor head without replacing the entire drive arm. We will tell you honestly if that applies to your gate, or if the discontinued parts make a full operator swap the cheaper answer.
Gate Access Control in Brooklyn
Gate Access Control in Brooklyn covers the keypads, remotes, intercoms, and safety sensors that tell your gate when to open and when to stop. On attached brownstones and converted loft buildings, access control is often the only thing standing between a shared courtyard and the street. A standard keypad replacement runs $180 to $320, and a full access control overhaul with new keypad, receivers, and photocells typically lands between $400 and $700. We will quote the exact figure before we order a single part.
Keypads and Intercoms
Salt air is rough on keypad terminals. We see corroded contacts on garden-level keypads near the Gowanus and Sheepshead Bay more than inland. When a keypad stops reading codes, we test for power first, then for corrosion, and we replace only what is actually dead.
Safety Photocells and Edges
Any automatic gate installed after UL 325 became the standard should have photocells or a safety edge that stops the gate if something is in the way. Many Brooklyn gates installed before the rule was enforced have neither. We can retrofit the missing safety equipment without triggering a landmark review, because it mounts to the gate, not to the historic iron face.
Trusted Brands We Service in Brooklyn
Our technicians are factory-trained on the brands Brooklyn families actually have on their properties: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Linear and DoorKing operators in our local vans so many repairs can be finished the same day. Viking and Ghost Controls parts are usually available within two business days. If your gate runs on a brand that is not listed here, call us anyway and we will tell you honestly whether we can source what you need.
Common Electric Gate Repair Problems We See in Brooklyn Homes
- Obsolete control boards on legacy operators. Brooklyn has thousands of LiftMaster, FAAC, and BFT gates installed in the 1990s and early 2000s. When the control board fails after years of freeze-thaw cycling and salt-laden air off Upper New York Bay, the replacement board is often discontinued, which means the entire operator gets swapped.
- Sagging gates caused by post heave, not bent panels. Masonry hinge posts crack at the footing after dozens of winters where temperatures cross 32°F repeatedly. The gate panel itself may be straight, but it sags because the post has moved. If a repair ignores the post, the gate will sag again within a year.
- Seized barrel hinges and cracked hinge plates. Brooklyn’s coastal exposure rusts iron hinges faster than inland markets. We regularly replace hinge sets on garden-level and rear-yard gates where the barrel has seized and the weld has cracked.
- Photocells knocked out of alignment or missing entirely. Gates installed before UL 325 became the standard often have no safety photocell at all. On other properties, the photocell is there but misaligned, so the gate refuses to close or reverses unpredictably.
Pricing for Electric Gate Repair in Brooklyn, NY
Most Brooklyn electric gate repairs land between $275 and $680. A keypad replacement runs $180 to $320. A hinge set replacement on a typical brownstone garden gate runs $275 to $450. A control board replacement, when the board is still available, runs $320 to $500. A full operator swap, which is increasingly common on legacy LiftMaster and FAAC units with discontinued boards, runs $450 to $680. The biggest cost lever is whether we can repair what you have or whether discontinued parts force a full replacement. We will always tell you before any work starts, and the price we quote is the price you pay.
Every job also includes the Cedarwell Care Promise: a written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before we leave. There is never a charge for the estimate itself.
We Also Serve Cities Near Brooklyn
Our Electric Gate Repair team works throughout Brooklyn, and we also take calls from nearby communities. If you are in Manhattan, Staten Island, the Bronx, or Mount Vernon, we can schedule the same careful, documented service we provide across Brooklyn. Call (626) 649-4572 and we will sort out the quickest visit time.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Brooklyn
No, not for most repairs. The NYC Landmarks Preservation Commission (LPC) requires review for work that alters, replaces, or removes protected historic ironwork, which includes gate panels and posts in districts like Brooklyn Heights, Park Slope, and Carroll Gardens. A like-for-like motor swap, control board replacement, or hinge repair that leaves the original flat-bar iron panels untouched usually needs only a Certificate of No Effect, and in many cases no LPC filing at all is required. We can tell you which applies to your gate before we order parts. Call (626) 649-4572 and describe what you have; we will give you a straight answer.
The panel is not the problem. The hinge post is. Brooklyn’s freeze-thaw cycle heaves masonry posts at the footing, and once a post is out of plumb, a straightened gate will sag again within a year. The fix is to shim and re-set the post, then re-hang the gate. A sag correction that ignores the hinge post is a callback waiting to happen. If your gate is sagging, call us and we will tell you over the phone whether the post or the panel is the likely culprit.
In most cases, you need a new operator. Discontinued FAAC control boards are increasingly hard to source, and when a compatible board does exist, the cost of the board plus labor often approaches the price of a new operator that will carry a fresh warranty. We will show you both numbers in writing and let you decide. Call (626) 649-4572 and we will tell you what applies to your exact model.
Yes, measurably. Brooklyn sits on a peninsula flanked by Upper New York Bay, the Gowanus Bay, and the Atlantic-facing shoreline at Coney Island and Sheepshead Bay. Salt-laden air accelerates rust on iron and steel components, and the region sees dozens of freeze-thaw cycles each winter as temperatures cross 32°F. That combination seizes hinges, cracks welds, and corrodes motor gears faster than inland cities. A motor in Brooklyn will often need replacement several years sooner than an identical unit in a dry, inland suburb. The practical fix is annual maintenance and treating rust at the first sign.
Yes. UL 325 is the safety standard for automatic gate operators in the United States, and it requires entrapment protection such as photocells or a safety edge. Gates installed before the standard was enforced often have neither. We can retrofit the missing safety equipment onto your existing gate, and because it mounts to the gate and the operator rather than to the historic iron face, it does not trigger LPC review. Call (626) 649-4572 for a written estimate.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Brooklyn, NY since 2009.