Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Azle
If your electric gate in Azle won’t open, drags on the ground, or trips its breaker every morning, here’s the short answer: most Azle gate repairs run between $185 and $480, and our Electric Gate Repair team can typically be at your driveway within a few hours on emergency calls. Azle sits right at the line where suburbia gives way to ranchettes, so we service everything from a Viking opener on a Pelican Bay subdivision entry to a Ghost Controls arm on a five-acre spread off Farm Road 730. Call (626) 649-4572 and a live person picks up, around the clock.
Why Latch & Post Gate Repair Is Azle’s Preferred Electric Gate Repair Company
Latch & Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, founded in 2009 and focused exclusively on gate repair, gate installation, and electric gate repair. We’re not a handyman service that also looks at gates, and we’re not a big-box service center. The work on your gate is the only work we do.
Our technicians are background-checked, uniformed, and factory-trained on the brands families across Azle actually own: LiftMaster, FAAC, Viking, Ghost Controls, DoorKing, and Elite. Before we touch anything, you get a written price. Before we leave, we lay down drop cloths, put on shoe covers, and send you a photo of the clean-up. Those steps are the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, and Explain the price before the work. Each one is included, not an add-on.
We also answer the phone. Live person, 24/7. Nights, weekends, holidays. No voicemail tree, no callback queue. If your gate operator seized during a March ice storm at 2 a.m. and your horses are behind it, you do not want a robot. You want Cody Beckman and the crew at Latch & Post.
Azle homeowners call us because we understand the difference between an ornamental steel gate on a Briar-Rose neighborhood lot and a 16-foot pipe-and-tube swing gate on a ranchette near Veal Station Road. The latter weighs four times as much, rides on post footings Texas clay has been trying to move for two decades, and was probably never installed with entrapment protection in the first place. We arrive ready for that reality.
Gate Access Control in Azle
Gate Access Control in Azle means more than the opener arm itself – it is the keypad, the remote control, the safety sensor, the control board, and the wiring that ties them into one working system so your gate opens for you, closes behind you, and never closes on a kid or a dog. In Azle, access control takes two common shapes: a keypad mounted on a gooseneck pedestal at the end of a gravel driveway, and a coded swing gate at a pasture entrance. Homeowners call us when the keypad stops reading codes, when a gate opens but won’t reverse, or when a control board fails and leaves the gate dead at the post.
Keypad and Remote Repair
A keypad that works intermittently on a winter morning is usually a cracked membrane or moisture behind the faceplate. We replace it, re-seal the housing, and test every code before we leave. Remote controls lose signal when receiver antennas get bent or control boards develop cold solder joints, and both are quick fixes when the truck is stocked. Most keypad replacements in Azle land between $120 and $240; remote control repair runs $50 to $140.
Safety Sensor Alignment
Azle homes with acreage often have photocell safety sensors mounted on gate posts that move with the clay. A sensor that has drifted even a few degrees out of line will keep the gate from closing, and the fix is re-aiming, re-weathering, and testing under load. We treat entrapment protection as mandatory, not optional – a gate without a working safety edge or photocell is a serious injury risk, especially for families with children.
Commercial Gate Operator in Azle
Commercial Gate Operator work in Azle covers the same issues as residential, scaled up: a slide operator on a business entrance, a barrier arm at a community gate, or a heavy-duty swing operator on a property that sees a dozen open-close cycles a day. Most commercial failures around Azle come from gearbox wear, chain tension drift, and operator arms mounted on concreting that has shifted with the expansive soil. A commercial operator that has run for 15 years off a control board with three re-soldered relays is usually at the end of its service life, and the honest answer is a replacement unit – not another band-aid on the old board.
Heavy-Duty Swing Operators for Wide Gates
Rural commercial entrances on the Parker County side of Azle often use wide, heavy pipe gates with single-arm operators that were under-specified for the job from day one. When the arm tries to move a panel that weighs several hundred pounds through a bind at half travel, the motor overdraws, the thermal overload trips, and the owner thinks the opener is dead. We square the gate at the hinge post first, then evaluate the operator. A replacement heavy-duty swing operator for a wide gate in Azle typically runs $650 to $1,400 installed, and the exact number is in writing before work starts.
Slide Operator and Chain Drive Service
Slide gate operators on Azle commercial lots fail most often from chain wear and sprocket misalignment on gates that have survived several wet springs. Re-tensioning a drive chain, replacing a limit switch, and calibrating the travel stops is a service call we see weekly. If the motor draws high current at start-up but the gate moves fine once rolling, the capacitor is failing – a cheap part, but it takes a trained eye to catch before the motor burns out.
Trusted Brands We Service in Azle
We’re factory-trained on the equipment Azle families and businesses actually own, and those are the brands we stock parts for: Viking, Ghost Controls, DoorKing, and Elite, alongside LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters when you need a control board replaced the same week rather than ordered from a distributor in Dallas. For Azle customers, we keep common boards, remotes, keypads, and limit switches on the truck so the first visit is usually the last visit.
Common Electric Gate Repair Problems We See in Azle Homes
- Heaved hinge posts and sagging gates. The expansive clay under Azle shrinks during dry summers and swells in wet springs, which moves gate posts a few degrees out of plumb. The gate panel then drags or binds mid-travel, and the operator trips on overload. The fix is re-setting the footing and often cutting a deeper pour, not just lubing a hinge.
- Ice storm damage to limit switches and shear bolts. Freezing rain, not snow, is the thing that gets Azle operators. Plastic limit-switch housings crack in the cold, shear bolts snap when ice locks a gate panel to the track, and older units installed 15 or 20 years ago were never sealed for that kind of exposure.
- Aftermarket single-arm operators on pipe gates. Many ranchette entry gates around Azle started life as manual pasture gates and had a swing operator bolted on years later. The post was never poured for the load, the hinge hardware is undersized, and the safety photocell is often missing entirely. These gates are the most common service call we run west of Farm Road 730.
- Solar-powered openers on remote acreage. Where there is no mains power at the gate entrance, Azle properties often run a solar panel into a battery bank that feeds a swing or slide operator. Dead batteries, corroded charge controllers, and panels angled to the north are common failures. We test the battery under load, not just with a voltmeter, because a battery that reads 12.8 volts at rest can still collapse under motor draw.
Key takeaways: post movement from clay soil causes more Azle gate problems than the operator itself; ice storms crack older housings and shear bolts; and solar-powered gates on unpowered acreage have a specific set of failure modes that require battery load testing.
Pricing for Electric Gate Repair in Azle, TX
Honest ranges for Azle work: gate motor repair runs $185 to $480, keypad replacement $120 to $240, remote control repair $50 to $140, safety sensor replacement or re-aiming $90 to $220, and control board replacement $250 to $650. A full single-arm swing operator install on a standard residential gate lands between $650 and $1,400. The price you pay here depends on three things: the weight and width of the gate, the condition of the posts, and whether we’re fixing wiring that water or a mower has chewed through. You will always see the exact number in writing before we touch anything, and no work starts until you approve it. Estimates are free. Call (626) 649-4572 and we’ll walk you through it.
We Also Serve Cities Near Azle
Our Electric Gate Repair in Azle service area also covers surrounding Tarrant and Parker County communities, including Newark, Springtown, Haslet, and Aledo. If your gate is along the Eagle Mountain Lake corridor or on the county line, give us a call and we’ll let you know when we can be there.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Azle
More often than not, it’s the gate post that has moved in the expansive clay, not the operator. On the Parker County side, crews hit caliche hardpan and rocky substrate at 18 to 24 inches when setting footings, so posts that were set shallow heave in wet springs and lean in drought summers. The gate panel binds mid-travel, the operator trips on overload, and the arm or motor takes the blame. We reset the post footing first, correct the hinge-post plumb, then re-level the arm and re-aim the safety photocell. The fix is an excavation job as much as a hardware job. Call (626) 649-4572 and we’ll diagnose it on site.
Yes, and many Azle ranchettes already do. A properly sized panel, a deep-cycle battery, and a charge controller will run a single-arm swing or slide opener through most of the year. The failures we see on solar gates around Azle are dead or sulfated batteries, corroded charge controllers, panels that have been re-angled wrong after a windstorm, and operators that draw more current than the battery bank can sustain. We test the battery under load to know if it will hold voltage when the motor kicks in, not just at idle. If you want to add solar or your current solar gate won’t hold a charge, call us for a real assessment.
Yes. Our crews carry hydraulic augers and carbide-tipped bits specifically for the caliche hardpan and rocky substrate common on the Parker County side of Azle. A standard auger from a Fort Worth-dispatched truck often stalls at 24 inches out here, which means a second trip and a second scheduling delay. We dispatch for Azle soil the first time, which is one reason local homeowners call us instead of a metro shop. Explain the price before the work starts, and the equipment is already on the truck.
Once a year is the right interval for an electric gate operator in Azle, with a visual check after major weather. North Texas clay moves under gate posts seasonally, and a quick service visit lets us re-plumb hinge posts, lubricate pivot points, check limit switches before the ice storms arrive, and catch a failing capacitor before the motor burns out. Annual service for a standard residential operator runs $120 to $200, and it is a lot cheaper than a mid-January emergency call at 2 a.m.
Yes, and this is not a paperwork technicality. A gate with a motor and no working safety device can crush a child or a pet, and that is the entire reason the entrapment protection standards exist. On Azle properties with older aftermarket single-arm operators bolted to manual pipe gates, we regularly find that the original install never included a functioning safety photocell or edge sensor. We will not leave a gate in service without working entrapment protection. If your gate lacks it, we’ll quote the fix in writing before we start.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, part of the Cedarwell family and serving Azle since 2009.