Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Argyle
A failed electric gate motor in Argyle usually means a service truck at your property within the same day, and the repair itself often takes under two hours once we know the brand and fault. Most Argyle calls we handle involve either an operator that will not respond, a gate that drifts out of alignment on its concrete or crushed-granite drive, or a keypad that has stopped accepting codes. We answer the phone 24/7, and the person who picks up is a live human in our Dallas-Fort Worth office, not a menu. Call (626) 649-4572 and you will get a straight answer about whether we can come out today.
We are Latch & Post Gate Repair, part of the Cedarwell family of gate specialists, operating since 2009. Our crew knows Argyle’s particular gate mix better than most, because this town does not have one standard gate type. It has three, often on the same property. A motorized ornamental steel estate gate at the street, a heavy manual pipe gate at the barn lot, and a smaller paddock gate. That combination is rare in Flower Mound or Roanoke, but on the east and south sides of Argyle it is nearly routine. The dual-market reality of Argyle – agricultural pipe work and bespoke high-end automation – is the trade we focus on every day.
Why Latch & Post Gate Repair Is Argyle’s Preferred Electric Gate Repair Company
Argyle homeowners call us because we treat the entire gate system as one job, not three separate trades. That matters when a single property off Crawford Road or along Harpole Road has a LiftMaster opener at the driveway, a Viking keypad on the same post, and a sagging pipe gate by the barn that the same technician needs to assess. We do not hand off the estate gate to one crew and the pasture gate to another. One uniformed, background-checked technician handles the visit from the street to the barn lot, writes the price before any work starts, and walks you through the repair before the tools come out.
Our reviews from Argyle customers consistently mention the cleanup routine as much as the repair itself. We lay drop cloths where we work inside the house or near finished garage floors, we wear shoe covers on every visit, and we send a photo of the cleaned work area before we leave. Those are not add-ons. They are part of the Cedarwell C.A.R.E. values our technicians follow: clean up like it is our own home, ask before moving or touching anything, respect the family’s time and quiet hours, and explain the price before the work. If you have a sleeping toddler or a nervous dog in the house, tell the dispatcher when you call. We can schedule around nap time and we choose pet-safe lubricants where there is a choice.
Every repair we perform in Argyle is covered by the 365-Day Done Right Promise. If the fix is not right, we make it right. No argument, no fine print.
Electric Gate Motor in Argyle
An electric gate motor in Argyle is under more strain than the same model in a suburban cul-de-sac, because the swing or slide gate it moves is often heavier and the ground under its post is constantly shifting. The Blackland Prairie clay that runs through this part of Denton County swells after spring rains and shrinks in summer drought, and that movement telegraphs straight into the operator’s travel limits. What starts as a gate that stalls halfway through its cycle is often a motor fighting a post that has moved a half-inch out of plumb.
What the Repair Actually Involves
We start by checking the operator’s travel limits and force settings against the gate’s actual weight and swing path. Factory settings are wrong more often than people expect, especially on heavier iron estate gates that were retrofit with a residential operator. We re-set the limits, re-shim the rack and pinion if the post has moved, and cycle the motor multiple times with the safety photo-eye and loop detector in the loop. The fixed price range for motor repair in Argyle typically runs $160 to $340 depending on whether we are adjusting, replacing a gear assembly, or installing a new board.
When a Motor Is Beyond Saving
Freeze-thaw events like the February 2021 ice storm crack plastic gear housings on exposed operators. When a housing is cracked and the motor is ten years old, replacing the motor costs less than repeated band-aid repairs. A new residential operator in Argyle usually runs $450 to $1,200 installed, parts and labor included in the written quote you get before we start.
Gate Access Control in Argyle
Gate access control in Argyle means the keypad, the remote, the intercom, and sometimes the vehicle loop detector that tells the operator to open for a pulling car. On estate properties with long driveways, we also see phone-line or cellular entry systems tied to the gate. The job is to make every code, fob, and sensor work together, so the gate opens for the family and stays closed for everyone else.
Keypads and Remotes
Argyle weather is hard on outdoor keypads. Dust from crushed-granite driveways works into the membrane buttons, and summer heat warps the faceplate. We replace or reprogram keypads and remotes for Linear, Ghost Controls, and DoorKing systems, among others. A replacement outdoor keypad typically runs $120 to $220 installed, and a new remote is usually $45 to $90 programmed to your operator.
Safety Sensor and Loop Detector Work
Every automatic gate in Argyle must have working entrapment protection, usually photo-eyes and an edge sensor. The safety requirement is not optional, and our technicians will not bypass a sensor to make a gate run. If a loop detector fails, the gate will not open for a vehicle but the remote works fine. We diagnose and replace loop detectors, and in Argyle’s clay soil the loop wire can crack as the ground shifts. A loop replacement with new saw-cut installation typically runs $250 to $500.
Trusted Brands We Service in Argyle
Our technicians are factory-trained on the operators and access systems families in Argyle actually have on their posts: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Latch & Post Gate Repair does not sell one brand, so the recommendation you get is based on your gate’s weight and your driveway’s layout, not on what we have in the truck. We keep common boards, gear assemblies, remotes, and keypads for these brands at our Dallas-Fort Worth supply bench, which means most Argyle repair visits are completed the same day without a second trip for parts.
Common Electric Gate Repair Problems We See in Argyle Homes
- Post footings shifted by Blackland Prairie clay. After a wet spring or a long dry summer, the clay under the gate post swells or cracks, and the post moves. An automatic gate that was aligned in April can be binding the rack and pinion by August.
- Frozen or cracked operator gear housings. North Texas ice storms pop plastic gear assemblies on exposed swing and slide operators. The motor still hums, but the gate does not move.
- Sagging hinges on heavy ornamental iron gates. A bespoke 14-foot iron gate is a lot of mass on two hinges. We often find the hinge post was undersized for the panel weight, and owners mistake the sag for a bent gate.
- Keypads and remotes that fail in heat and dust. Argyle’s unpaved shoulder roads and gravel driveways put fine dust into outdoor keypads, and summer heat warps the plastic. Dead keys are usually a membrane or board issue, not a code problem.
Pricing for Electric Gate Repair in Argyle, TX
We Also Serve Cities Near Argyle
Our crews regularly run to Flower Mound, Roanoke, Lake Dallas, and Denton for gate repair work. If you are outside those towns but near the Denton County line, call us and we will tell you honestly whether we can reach you. Wherever we go, the same Electric Gate Repair standard applies: written price, clean floors, done right for a year or we come back.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Argyle
Why does my Argyle automatic gate keep drifting out of alignment?
The answer is almost always the soil. Argyle sits on Blackland Prairie clay that swells after rain and shrinks in drought, and that seasonal movement shifts the gate post out of plumb. Once the post moves even a half-inch, the rack and pinion or the chain drive goes out of alignment and the gate drifts off its travel limit. We re-set the post if needed and re-align the operator, and most properties need this re-checked every two to three years because the ground here never really stops moving. Call (626) 649-4572 and we will check alignment on the same visit.
Can Latch & Post repair my estate gate and my horse-pasture pipe gate in the same visit?
Yes. In fact, that is the standard Argyle call for us. We regularly work a motorized ornamental iron gate at the street, a manual pipe gate at the barn lot, and a smaller paddock gate on the same property, all in one visit. Because we are a gate specialist, not a general handyman, we can handle the operator electronics, the hinge work, and the welding without sending a second crew. The written quote covers all three before we begin.
Are my LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, or Elite operator serviced?
All of those brands are covered. Our technicians carry factory training specific to LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and we keep common boards and gear assemblies for those brands on hand. When an Argyle customer has an older operator from one of these makers, we usually do not need to special-order parts, which keeps the repair to one visit rather than two.
Is my Argyle gate required to have safety photo-eyes?
Yes. Automatic gate operators in Texas must have entrapment protection, and photo-eyes paired with an edge sensor are the standard. We will not bypass a sensor to make a gate run, and if a sensor is dead we replace or realign it as part of the same repair. The safety system is not an upsell; it is part of the gate running correctly and legally. Our technicians test the photo-eye and the reversal function on every electric gate repair we complete.
My gate is sagging, do I need a new panel?
Usually not. A sagging gate in Argyle is typically a hinge problem or an undersized hinge post, not a bent panel. Heavy ornamental iron gates overload posts that were set for a lighter gate, and fifteen years of swinging a 300-pound panel pulls the hinges out of true. We reset or replace the hinge post, repair the hinge barrels, and re-hang the panel. Replacing the panel is rare, and we will tell you if you do not need it. Call (626) 649-4572 for a free estimate on the sag repair.
On a 6-acre spread off Harpole Road, our tech diagnosed an intermittent slide gate that ran fine in cool weather but stalled by afternoon: the Blackland Prairie clay had heaved the post footing out of plumb, throwing the rack and pinion out of mesh. We re-set the hinge post, re-shimmed the rack, cycled the LiftMaster operator through its travel limits, and confirmed the safety photocell and loop detector still tripped correctly. One visit, barn-to-street, all three gates checked.
If your automatic gate is stalling, sagging, or ignoring the keypad, call (626) 649-4572. A live person answers, day or night, and the written price comes before any work begins. Electric Gate Repair in Argyle is what we do, from the estate gate to the paddock.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Argyle since 2009.