Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Antioch
Electric gate repair in Antioch typically costs $180 to $480 for common opener and sensor fixes, and more involved jobs like a failed swing-arm operator or a hinge post that’s pulled loose usually land between $600 and $1,400. The delta winds that funnel through the Carquinez Strait don’t just make gates sag; they work hinge bolts loose and burn out first-generation swing-gate openers faster than almost anywhere else in the East Bay. If your gate stopped mid-travel on a G Street driveway or a north-side tract home, call (626) 649-4572 and we’ll get a technician out to look at it.
Why Latch & Post Gate Repair Is Antioch’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned gate specialists, and our Electric Gate Repair team works exclusively on gates: latches, posts, openers, and automation. That focus matters in Antioch, where the housing stock was built quickly. So many homes in the east and north subdivisions went up in the 1990s and early 2000s with the same LiftMaster or Linear swing-gate operator. When one fails, its neighbors are usually not far behind. Led by Cody Beckman, our technicians know to check the hinge post footing, the entrapment photo-eyes, and the control board in one visit, because those three fail together here.
Every call is answered by a live person, 24 hours a day. Nobody gets a voicemail. When you call about a gate dragging across the driveway, we ask specific questions: is it a swing or a slide, does it stop mid-travel, does the keypad still beep. That’s how we show up with the right parts on the first trip, not a clipboard and a return visit.
And before any work starts, you get a written price. No pressure, no vague “we’ll see when we’re in there.” The number you see is the number you approve. If the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right. That’s our policy, printed plainly.
Commercial Gate Operator in Antioch
Commercial gate operators in Antioch see constant abuse from wind, dust, and daily cycles. These are the heavier slide and swing operators on apartment complex entrances, storage facilities, and smaller commercial lots off Somersville Road and Lone Tree Way. The sustained Carquinez winds press against wide steel gates all day, forcing the operator to fight the load. Over time, that burns out capacitors, limit switches, and drive gears. A commercial gate operator repair in Antioch typically runs $480 to $1,600 depending on the operator model, and a full replacement of a slide operator with new receiver and safety loops can land between $2,100 and $4,300. Those are real ranges for this market, and you’ll see your exact number in writing before we begin.
Operator Replacement in Antioch
When a commercial operator fails, the gate almost always fails in a half-open position. Businesses on Contra Loma Boulevard and along Auto Center Drive cannot leave that unattended. We schedule the swap around your access hours, and we keep the gate operable manually if an emergency shuts things down.
Safety Loop and Photo-Eye Service
Commercial operators in Antioch need working safety loops and photo-eyes, full stop. The vehicle loop in the asphalt tells the operator not to close on a car; the photo-eye does the same for pedestrians. We test both on every commercial call, including entrapment-protection verification before we leave.
Gate Opener Repair in Antioch
Gate opener repair in Antioch is the call we get most often, and it usually starts the same way: the gate moved slower, started grinding, then stopped mid-swing. On a 1998 tract home off Hillcrest Avenue, that’s often a first-generation swing-arm opener with a burnt gear and a sagging hinge post behind it. Replacing the opener without fixing the post means the new motor starts pulling against a misaligned gate on day one. A gate opener repair in Antioch typically costs $240 to $520 for limit resets, gear replacements, and control board diagnostics. A full swing-arm opener replacement runs $700 to $1,400 for residential work. We quote it in writing before we touch a thing.
Worn Gear and Limit Reset
Delta wind loads cause openers to run long and hot. The internal gear wears faster here than in a shielded suburb. If the gate stops three inches short of the post or slams past it, the limits need resetting and the gear likely needs replacing. This is a two-hour job in most cases, and quiet: no jackhammer, no shouting.
Control Board Replacement
Boards fail from heat and power surges. Antioch summer afternoons over 100 degrees shorten control board life on openers mounted in direct sun. We carry boards for LiftMaster, Linear, and DoorKing on the truck, so most swaps happen same-day. If the board is obsolete, we can usually source a replacement through our parts network within two days.
Common Electric Gate Repair Problems We See in Antioch Homes
- Hinge post pulling out of a shallow footing. Many 1990s and early 2000s tract homes on the north and east sides of Antioch have gate hinge posts set in shallow concrete. Delta wind loads against a wide wrought iron panel lever the post loose over a decade, and then the gate sags until it drags on the driveway and kills the opener.
- Burnt swing-gate opener motor from constant wind pressure. The Carquinez Strait funnels wind straight into neighborhoods off Hillcrest Avenue and Lone Tree Way. Openers fight that pressure every cycle, and motors wear out noticeably faster here than in Brentwood or Walnut Creek.
- Wood side-yard gate bowed from summer heat. Temperatures past 100 degrees cause wood panels to expand and bow between spring and midsummer. A gate that was plumb in May can be dragging by July, and that tightens the opener’s workload until the motor trips its thermal overload.
- Corroded hinges and latches from Delta moisture. The airborne moisture and mild brine that drift inland from the Delta speed corrosion on ferrous hardware. Latches get stiff, hinges squeak and bind, and the operator has to work harder to move the same gate. We choose corrosion-resistant hardware wherever the gate allows it.
Shared Driveways and Tight Antioch Sites: The Real Working Conditions
Here’s what actually shapes electric gate repair in Antioch, and it’s the part no generic gate page will tell you. On the east and north sides, the 1990s and 2000s tract subdivisions were built on compressed timelines with nearly identical gate packages. A street off Lone Tree Way or a block north of Hillcrest Avenue will have five, seven, maybe nine homes with the same first-generation swing-gate opener. When one fails, the neighbors are typically months behind it. That’s why we run parts-anticipation on these blocks. We know which opener model dominates a given street, so we stock that gear on the truck and often repair two or three gates on the same trip. That keeps the per-gate cost down and gets whole blocks working again faster than a one-off visit could.
Then there’s the shared driveway problem. Antioch has plenty of duplexes, in-law setups, and older downtown lots where two households use one gate and one driveway. A gate that will not close leaves both homes exposed, but a repair that blocks access creates its own mess. We work around that. On swing gates we can usually repair and test without ever closing the driveway for more than a few minutes. On slide gates, the issue is different: many Antioch lots simply do not have the side clearance for a sliding gate, so swing gates are the norm. That means the hinge post and the operator arm take everything the wind gives them, and they need to be checked together, every time.
Trusted Brands We Service in Antioch
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Antioch, we most often see Linear and DoorKing openers on older tract homes, and Viking on larger or commercial properties. The difference is that we stock local parts for those common models, so the repair doesn’t stall for a shipped component. Cody Beckman keeps a running inventory of control boards, gear kits, and photo-eyes for the operators that dominate Antioch’s streets. When you call with a failed opener, the right part is usually on the truck.
Pricing for Electric Gate Repair in Antioch, CA
Here are honest ranges for Antioch’s market. A gate opener diagnostic and limit reset runs $180 to $300. A hinge post repair, including digging out the old footing and setting the post in fresh concrete, runs $450 to $900 depending on depth and access. A full residential swing-arm opener replacement is $700 to $1,400. A commercial slide operator, with safety loops and receiver, typically lands between $2,100 and $4,300. The Delta-wind factor means a straight opener swap without checking the hinge post can cost you twice: the new opener fails within a year. That’s why we check both, quote both, and fix both with the number in writing before any work starts. Call (626) 649-4572 for a free estimate.
We Also Serve Cities Near Antioch
Our Antioch technicians also cover Oakley, Pittsburg, Clayton, and Brentwood. The same Delta wind affects those gates, but the failure patterns differ by housing stock: Oakley and Brentwood have newer construction, while Pittsburg and Clayton have more varied, older gates. We adjust our parts stocking and repair approach for each.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Antioch
You need the hinge post fixed. Here’s why: in Antioch, the wind loads carried through the Carquinez Strait lever against the gate panel constantly. If the hinge post is loose or the footing is shallow, a new opener will pull against a misaligned gate and wear out again, often in under a year. We set the post, correct the sag, reset the limits, and then address the opener, in that order. A hinge post repair runs $450 to $900; skipping it is the most expensive shortcut we see. Call (626) 649-4572 for an exact quote.
Because the tract homes on many Antioch streets were built in the same window, on the same plan, with the same gate opener package. We’ll see the same first-generation LiftMaster or Linear swing operator on an entire block off Lone Tree Way or north of Hillcrest. They all have the same age, the same wear pattern, and the same shallow footings. When one fails, the neighbors follow. That’s why we run batch trips and stock parts by neighborhood: it’s cheaper for everyone and gets the block fixed faster.
Yes, and it’s measurable. Antioch sits at the western mouth of the Sacramento-San Joaquin Delta, where the Carquinez Strait funnels wind directly through residential corridors. Brentwood is further inland with less sustained pressure, and Walnut Creek is shielded by hills. An Antioch opener runs longer and hotter every cycle to fight that wind, so its gear, capacitor, and motor see more load hours than identical equipment in those cities. That’s not a sales line. It’s a parts-replacement pattern we see weekly.
On a shared driveway, we schedule around the access pattern and keep the gate operable as much as possible. Most swing gate repairs in Antioch can be completed without closing the driveway for more than a few minutes: we work on the gate panel, the hinge post, and the operator arm while the driveway stays open for the other household. For slide gates, which are less common in Antioch’s older lots due to clearance, we coordinate the few minutes of needed closure ahead of time. Tell us the access situation when you call and we’ll plan around it.
Yes, absolutely. Entrapment protection, meaning the photo-eyes and the reverse mechanism, is the safety system that stops the gate from closing on a person or a car. On every electric gate repair in Antioch, we test that system before we finish. We walk the gate through its full travel, block the photo-eye, and confirm the gate reverses. You should watch us do it, because it’s your home and your family. We verify entrapment protection on every job, repair or replacement, and we won’t sign off without it.
If your gate is dragging, stalled, or just making the wrong sound, call Latch & Post Gate Repair at (626) 649-4572. We’ll give you a straight answer, a written price, and a repair that holds up in Delta wind.
Written by Cody Beckman, Owner at Latch & Post Gate Repair, serving Antioch with the Cedarwell Care Promise: written pricing, shoe covers and drop cloths on every visit, and a cleanup photo before we leave.