Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Denton, TX
Denton gate work is different from gate work in Dallas, Fort Worth, or anywhere else in the metro, because the soil underneath this city moves more than the gates sitting on top of it. The Blackland Prairie clay swells in wet months and shrinks in dry ones, and that cycle slowly tilts posts, throws hinges out of line, and leaves even quality gates sagging after just a handful of years. Housing here splits between 1960s-era rentals near UNT and TWU and post-2010 HOA subdivisions along Loop 288, US-377, and I-35W, so the gate on a Denton home can be a weathered chain-link pull-through or a powder-coated ornamental iron driveway gate with an architectural review committee watching. Whatever you have, a live person answers at (626) 649-4572 any time you call.
Why Denton Homes Are Different
The defining fact of gate work in Denton is the soil. It is a highly expansive black clay, and it does not forgive a shallow footing. When the clay absorbs rain, it swells and pushes upward on the concrete around each gate post. When it dries, it shrinks and the post settles slightly out of level. Over a few wet-dry seasons, that repeated movement is enough to shift a gate post even a half inch, and a half inch at the post becomes a visible sag at the latch side. We regularly see ornamental iron and cedar gates installed three to seven years ago in subdivisions along the Loop 288 corridor that are already racking, failing to latch, and dragging against the post.
Denton also gets more ice accumulation than Dallas proper, and ice is what turns a small misalignment into a structural break. Freeze-thaw cycles push moisture into small gaps around fasteners and footings, and the extra weight of ice on a frame that is already out of square stresses hinges and welds until something fails. On top of that, many of the post-2010 HOA communities specify exact powder-coat colors, cedar grades, and ironwork profiles, so a fix using off-the-shelf parts that do not match the original spec can fail an HOA inspection. Local operators who stock matching materials avoid the callbacks that out-of-area crews keep getting hit with.
Our Main Denton Services
Most Denton calls start with one of two situations: a gate that will not close or latch correctly, or a family ready to replace an old gate and unsure what the HOA will allow. Electric gate systems add a third layer of diagnostics, which is why they have their own page.
Gate Repair in Denton
Most repair calls we take in Denton begin with a sag. The gate scrapes the ground, the latch no longer lines up with the post, or a hinge pulls loose from weathered wood. The fix usually means resetting or re-securing posts, truing the frame, and replacing worn hardware, and we always start by figuring out whether the soil has moved the post before we adjust anything on the gate itself. You will see the written price before any work starts, and a 365-day guarantee covers every repair. Take a look at the full breakdown on our Gate Repair in Denton page.
Gate Installation in Denton
A new gate in Denton has to answer three questions before we order the first piece: what does the HOA require, what will the clay do to the footings, and how heavy is the gate going to be for the hardware. We install cedar privacy gates, ornamental iron, and driveway gates sized for the newer master-planned communities, and we dig footings deep enough for the local soil, not a generic spec. If you are replacing a gate the association signed off on years ago, we can fabricate to match the original finish so you are not stuck explaining mismatched parts to an architectural review board. See Gate Installation in Denton for specifics.
Electric Gate Repair in Denton
An electric gate that stops moving in Denton is usually one of three things: a control board that has taken a hit from a power surge, a limit switch knocked out of setting by post movement, or a motor working against a gate that the clay has shifted out of square. We service FAAC, BFT, Linear, and Viking operators, along with other common residential brands, and the first step is always confirming the gate itself moves freely before we touch the electronics. The full diagnostic process is on our Electric Gate Repair in Denton page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Denton
We are factory-trained on the gate brands Denton homeowners actually open and close every day: FAAC, BFT, Linear, and Viking among them. Most common repair parts for these brands are stocked and ready, which keeps the fix on its first visit. See our brands for the full list.
Pricing for Gate Company in Denton, TX
Every price below is a typical range for Denton, and every one is confirmed in writing before we order the first part or turn the first wrench.
| Service | Typical range in Denton |
|---|---|
| Gate sag or rack repair | $180-$420 |
| Gate post reset or replacement | $250-$650 |
| Latch or hardware replacement | $95-$260 |
| Hinge replacement (pair) | $120-$340 |
| Wood gate frame rebuild | $300-$750 |
| Chain-link gate tension and hardware tune-up | $140-$310 |
| Ornamental iron weld repair | $150-$400 per section |
| Electric gate operator diagnostic | $120-$280 |
| Limit switch or control board replacement | $220-$550 |
| Electric gate sensor or photo-eye replacement | $160-$390 |
Prices in Denton climb when clay movement has shifted a post enough to require new concrete, or when an HOA finish means parts need to be matched or fabricated rather than pulled from a shelf. The written quote covers the full job, and we do not start until you have seen and approved it.
Neighborhoods We Serve in Denton
We run gate repair and gate installation calls across Denton, from the UNT and TWU rental belt to the post-2010 HOA subdivisions along US-377, I-35W, and Loop 288. Most repair calls are scheduled within 24 to 48 hours, and crews coordinate dispatch through our Dallas-Fort Worth office.
- Corinth
- Southridge
- Idiot’s Hill
- North Denton
- Rayzor Ranch
Service Area – Cities Near Denton
Latch & Post Gate Repair serves Denton and the smaller communities around it. If you are a few minutes outside the city, we likely cover you too: Krum, TX, Argyle, TX, Sanger, TX, and Aubrey, TX are all in our regular service area.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denton
For a gate that is stuck open, off its track, or otherwise unsecure, we will get a technician out the same day in most of Denton. A live person answers the phone 24/7 at (626) 649-4572, so you will know within the first minute when someone can arrive.
That depends on your association. Many of the newer Denton subdivisions require approval for any visible change to a gate, including a full replacement, and some require it for a repair that changes the hardware or finish. We can match the original spec that the association approved, and we will tell you before any work starts whether your HOA’s rules could affect the job.
Most Denton gate repairs land between $150 and $450, depending on what has moved, worn out, or broken. You will see the exact number in writing before any work begins, and the price we quote is the price you pay. Call (626) 649-4572 for a free estimate on your specific gate.
If your gate is sagging, stuck, or not latching in Denton, call Latch & Post Gate Repair at (626) 649-4572 for a free, no-pressure estimate. A live person answers, and the written price comes before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Denton Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick