Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richwood, TX
Gate work in Richwood doesn’t follow the standard playbook. Between Gulf Coast salt air, chemical particulates from the nearby petrochemical corridor, and the lingering effects of Hurricane Harvey’s 2017 flooding, the hardware on Richwood homes fails in ways you won’t see twenty miles inland. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist focused only on gates: repair, installation, and electric operators. If your gate sags, sticks, or your opener trips constantly, call us at (626) 649-4572. You’ll get a written price before any work begins, every time.
Why Richwood Homes Are Different
Most Richwood homes were built in the 1960s through 1980s as modest ranch-style houses for plant workers. That means flat lots, older chain-link or basic ornamental iron gates, and original post footings that have been through a lot. When Harvey came through, water sat on these properties for days. Concrete shifted, posts heaved, and many gates have sat slightly out of plumb ever since. A gate that fights its own hinges every time it opens is a gate that burns through motors and latch hardware. We see this pattern constantly here: an opener that trips its thermal overload repeatedly, and the homeowner assumes the motor is failing. Often the real fix is resetting and re-seating the post first.
The second factor is the air itself. Richwood sits within a few miles of the Dow/Freeport corridor and roughly ten to fifteen miles from the Gulf. That’s a compound environment: salt air from the coast plus industrial particulates from the plants. Gate operators, hinge pins, and post welds here corrode years ahead of manufacturer specs. Galvanized hardware that would last fifteen years in Katy might look rough in five here. When we work on a Richwood gate, we choose corrosion-resistant materials because we know what the air does. It’s not an upsell. It’s the only way a repair holds.
Our Main Richwood Services
Most Richwood homeowners call us about one of three things: a gate that won’t swing or latch, a new gate to replace one that’s done, or an electric opener that’s misbehaving. Each has its own dedicated page.
Gate Repair in Richwood
Gate repair here usually involves more than replacing a latch or a hinge. Before we touch any hardware, we check the post alignment, because a shifted footing will undo any repair within months. Latch failures, sagging gates, broken welds, and rusted hinge pins are the common calls. We carry replacement parts for FAAC, BFT, and Linear operators, and our technicians document the post condition before and after the work. You’ll see the written price first. Read the full scope on our Gate Repair in Richwood page.
Gate Installation in Richwood
New gate installations in Richwood start with the footing, not the gate itself. Given the flood history and the shifting soils in the Brazos River floodplain, we set posts deeper and often use larger concrete footings than a standard inland install would call for. That’s the difference between a gate that opens smoothly for a decade and one that binds after two seasons. We install wood, ornamental iron, and chain-link gates sized to the property. You’ll get a written price, shoe covers and drop cloths inside the house, and a cleanup photo before we leave. Details are on the Gate Installation in Richwood page.
Electric Gate Repair in Richwood
Electric gate operators in Richwood contend with humidity, salt air, and chemical exposure that inland machines never face. Control boards corrode, limit switches fail, and wiring connections degrade faster here. We’re factory-trained on FAAC, BFT, Linear, and Viking openers, plus the other brands families in this area actually own. When an opener trips its overload or stops mid-travel, we diagnose the whole system, including the gate’s mechanical alignment, because a strained motor is often a symptom of a shifted post. The full picture is on our Electric Gate Repair in Richwood page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richwood
We work on the gate operators and hardware Richwood homeowners actually have. That includes FAAC, BFT, Linear, and Viking, alongside LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for the most common models are stocked in our service vehicles, which keeps most repairs to a single visit. See our brands for the full list.
Pricing for Gate Company in Richwood, TX
| Service | Typical range in Richwood |
|---|---|
| Gate latch or hinge replacement | $145 - $285 |
| Sagging gate realignment | $185 - $360 |
| Gate post resetting or re-footing | $450 - $1,200 |
| Manual gate tune-up (lube, adjust, tighten) | $120 - $220 |
| Chain-link gate panel replacement | $300 - $650 |
| Ornamental iron gate repair (weld, straighten) | $350 - $850 |
| Electric opener diagnostic call | $95 - $175 |
| Opener motor or control board replacement | $380 - $900 |
| Keypad or remote programming | $80 - $150 |
| Safety edge or photo-eye replacement | $165 - $320 |
Two things push Richwood prices higher than average. Corrosion damage often means we’re replacing more hardware than a typical inland job, and post-hurricane misalignment means the footing work is part of the repair, not an add-on. Whatever the scope, you’ll see the full number in writing before we start – and that number doesn’t change unless you approve a change first.
Neighborhoods We Serve in Richwood
We work all over Richwood, from the older ranch-style streets near the plant side of town to the newer residential pockets further south. Most Richwood homeowners can get a technician out within one to two business days, and emergency gate failures are handled as quickly as our schedule allows. We regularly serve:
- Audubon Woods
- Brazoswood area
- Shywood
- Richwood Village
- Plantation Drive corridor
Service Area – Cities Near Richwood
While this page covers Richwood gate work specifically, Latch & Post Gate Repair also serves surrounding communities throughout the region. If you’re in a neighboring area, you can find direct service information for Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Richwood locally.
Serving Richwood, TX - Our Local Coverage Area
We’re based in the Richwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richwood
Most Richwood appointments happen within one to two business days. Emergency repairs, like a gate that won’t close and leaves a yard open to the street, get priority on the schedule. Call (626) 649-4572 and a live person answers around the clock to set an arrival window.
Some Richwood neighborhoods have deed restrictions or HOA review processes for front-facing gate changes. We don’t file those applications for you, but we can provide the specs and material descriptions the HOA typically asks for. Bring us the requirements and we’ll make the paperwork straightforward.
No. Estimates are free, and the price we quote is the price you pay – written down before any work starts. If a repair reveals something unexpected, we stop and explain the change before touching anything else. You’re never locked into something you didn’t approve.
If your gate is giving you trouble, call (626) 649-4572 for a free estimate. A live person answers, day or night, and we’ll get your gate working right the first time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richwood Customers Say
"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon