Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Surfside, FL
Gate repair in Surfside has to account for something most gate companies never think about: this town sits on a half-mile-wide barrier island, so salt air hits every hinge, motor, and steel post from both the Atlantic and Biscayne Bay. That changes everything about how a gate wears, what parts survive, and what repair actually solves the problem. We’re Latch & Post Gate Repair, part of the Cedarwell family of gate specialists since 2009, and we handle gate repair, gate installation, and electric gate repair across Surfside. Every job starts with a written price before any work begins. Call us at (626) 649-4572.
Why Surfside Homes Are Different
Surfside’s housing stock is almost entirely mid-century and contemporary condo towers packed into roughly 0.6 square miles, and nearly every property has a gated vehicle entry plus a secured pedestrian access. That means most gate work here runs through professional HOA management companies. Boards request documented parts specs, permit compliance, and warranty-backed repairs before a technician ever touches the gate. It’s a different rhythm than a single-family-home call: more paperwork upfront, but also clearer expectations about what the repair must accomplish.
The climate does not give gates a break here. Salt-laden ocean air approaches from both directions, and standard powder-coated or galvanized steel hardware that might last a decade in Hialeah can show deep rust and motor seizure within 18 to 24 months on the oceanfront blocks along Collins Avenue. Marine-grade aluminum frames and stainless-steel fasteners are the only realistic spec for any property east of Harding Avenue. After the 2021 Champlain Towers South collapse, Florida’s SB 4D milestone-inspection mandates put Surfside’s condo associations under intense scrutiny, and many boards now audit all exterior infrastructure including gate systems as part of building-safety compliance. We see the paperwork side of that every week, and we’re comfortable with it.
Hurricane-season wind-driven debris and periodic storm surge also damage gate arms, loop detectors, and control boards. Post-storm repair demand concentrates in a very small footprint here, which means scheduling moves differently after a named storm. When the gate stops working on a building, every resident notices. We treat that urgency seriously, but without alarm: the job gets diagnosed correctly first, then priced in writing, then fixed.
Our Main Surfside Services
Most Surfside calls to us fall into two categories: a gate that stopped working correctly, or a gate system that needs to be upgraded or replaced entirely. Here’s what each involves locally.
Gate Repair in Surfside
Surfside gate repair usually starts with a swing gate or slide gate that has become noisy, slow, or stuck. Salt corrosion on hinges and rollers is the most common culprit near the water, while storm surge damages control boards and loop detectors on ground-level entries. We arrive with marine-grade replacement hardware as an option, not an afterthought. Repairs are quoted in writing before we start, and our technicians lay drop cloths and wear shoe covers when the work takes them through a lobby or into a building interior. Full details are on the Gate Repair in Surfside page.
Gate Installation in Surfside
New gates in Surfside have to handle two realities at once: the corrosive environment east of Harding Avenue and HOA design and safety requirements that vary building to building. We measure, specify materials that actually hold up here (marine-grade aluminum, stainless fasteners), and pull permits where the building or town requires them. A written quote covers the full scope before anything is ordered, so there’s no surprise line item halfway through the project. We can schedule around building hours and quiet times. Read more on the Gate Installation in Surfside page.
Electric Gate Repair in Surfside
Electric gate failures in Surfside often trace back to salt intrusion in the control board, corroded limit switches, or loop detectors knocked out by storm debris. We’re factory-trained on FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, LiftMaster, and Mighty Mule systems, so the right fix usually happens on the first visit. When a board is beyond saving, we quote a replacement with the exact part and labor before ordering. For the full picture, see the Electric Gate Repair in Surfside page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Surfside
We repair and install FAAC, BFT, Linear, and Viking systems here, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common parts for these brands are stocked locally, which keeps most repairs to a single visit. More detail is on our brands page.
Pricing for Gate Company in Surfside, FL
| Service | Typical range in Surfside |
|---|---|
| Gate latch replacement | $180 - $340 |
| Hinge replacement (pair) | $220 - $420 |
| Gate wheel or roller replacement | $160 - $300 |
| Gate sag adjustment and reinforcement | $200 - $380 |
| Gate opener motor replacement | $450 - $950 |
| Control board replacement | $350 - $800 |
| Loop detector replacement | $280 - $560 |
| Complete gate installation (single swing) | $2,800 - $7,500 |
| Complete gate installation (slide gate) | $4,500 - $12,000 |
| Electric gate automation system | $1,800 - $4,500 |
| Safety edge and photoelectric sensor install | $350 - $900 |
| Access control add-on (keypad or intercom) | $600 - $1,800 |
Oceanfront properties east of Harding Avenue tend to land at the higher end of these ranges because marine-grade materials and stainless hardware simply cost more, and board-level documentation adds labor time. Whatever the final number is, you’ll see it in writing before any work starts, and the price we quote is the price you pay.
Neighborhoods We Serve in Surfside
Surfside is compact, but the gate work differs block to block. We cover the entire town and typically respond to Surfside calls the same day, though post-storm periods can extend scheduling as demand spikes across the island.
- Collins Avenue oceanfront corridor
- Harding Avenue commercial and residential stretch
- North Surfside near 96th Street
- The central condo district around the community center
- Residential streets west of Abbott Avenue
Service Area – Cities Near Surfside
Most of our work stays in Surfside, but we also take calls from homeowners and HOAs in nearby cities. If you’re in Miami, FL, Jacksonville, FL, Orlando, FL, or Tampa, FL, reach out and we’ll let you know whether one of our local crews can help. Scheduling is coordinated from our Miami office, and the same written-price and clean-up routine applies everywhere we go.
Serving Surfside, FL - Our Local Coverage Area
We’re based in the Surfside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Surfside
Most Surfside calls are answered the same day, and we keep common parts for FAAC, BFT, Linear, and Viking systems stocked locally. After a hurricane or major storm, response windows stretch because demand concentrates on the island. Call (626) 649-4572 and we’ll give you a straight answer on timing.
Yes. Most of our Surfside work is on condo properties managed by professional association companies, and we’re used to providing documented parts specs, warranty information, and permit filings. We coordinate with the HOA or property manager so the repair meets the board’s requirements before we begin.
We will secure the gate so the property remains safe and usable, then return with the correct part once it arrives. You’ll know the full scope and the written price before we leave the first visit, so there’s no surprise second invoice. If you need a faster decision, call us and we’ll walk you through options.
Call (626) 649-4572 for a free estimate on any gate repair, installation, or electric gate issue in Surfside. A live person answers around the clock, and every job starts with a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Surfside Customers Say
"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco