Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Oxnard, CA
Latch & Post Gate Repair is a gate company focused on Oxnard’s specific conditions: salt air, coastal moisture, and gate hardware that fails faster here than almost anywhere else in Ventura County. We repair, install, and service electric gates across Oxnard, from Mandalay Bay waterfront properties to older central neighborhoods with 1950s-era ironwork. Every visit includes a written price before work starts, shoe covers and drop cloths inside the home, and a cleanup photo before we leave. Call (626) 649-4572 and a live person answers, day or night.
Why Oxnard Homes Are Different
Oxnard sits directly on the Pacific, and that changes everything about gate work here. The marine layer settles over the city most mornings and evenings, leaving a fine salt moisture on metal surfaces that inland cities ten or fifteen miles away never see. Standard residential gate hinges, springs, and operators that would last a decade in Thousand Oaks can seize or short out in Oxnard within two or three years. On streets near Channel Islands Harbor and Mandalay Bay, we routinely find bare-steel hinges and gate operators installed just a couple of years prior already pitted, seized, or dead from corrosion.
The housing stock works against standard hardware too. Older central Oxnard neighborhoods, built from the 1950s through the 1970s, often have original wrought iron gates with decades of layered paint and rust. Newer River Ridge communities and harbor-side lots come with ornamental steel gates that look great but face the most aggressive salt-air exposure in the city. Out on the agricultural fringe of the Oxnard Plain, working ranches still use large swing and sliding estate gates on unpaved driveways where dust and grit add another layer of wear. Few cities mix coastal residential and farm gate work the way Oxnard does, and the materials that work in one setting often fail in the other.
Our Main Oxnard Services
Homeowners in Oxnard call us most often about gates that have stopped latching or swinging freely, and about electric openers that have quit after a few years near the coast. Each service has its own Oxnard page with full pricing and details.
Gate Repair in Oxnard
Most gate repairs in Oxnard start with a hinge, a latch, or a post that has shifted, and coastal corrosion usually plays a role. A gate that scraped the driveway in a Camarillo home for years may fail in Oxnard in months as salt air binds the hinge pins. We inspect the full swing path, lubricate or replace seized hardware with marine-grade parts where they belong, and check the post so the gate doesn’t sag again next season. Drop cloths and shoe covers stay on whenever we step inside, and the written price comes before anything gets touched. See Gate Repair in Oxnard for what we charge and how we work.
Gate Installation in Oxnard
New gate installation in Oxnard isn’t a one-size job, and the coastal air decides what materials make sense. Powder-coated steel may look right in a River Ridge driveway but blister within a few seasons if the coating isn’t marine-rated; stainless hardware and properly sealed posts cost a little more up front and avoid replacing the whole gate after three years. On the Oxnard Plain’s ranch properties, we set posts for wide sliding and swing estate gates on unpaved driveways that need deeper footings than city lots. We measure, quote a written price, and schedule the work so your driveway stays usable. Details at Gate Installation in Oxnard.
Electric Gate Repair in Oxnard
Electric gate failures in Oxnard cluster around the operator: salt moisture gets into control boards, corrodes limit switch connections, and kills motors that were never rated for this kind of exposure. We see Viking and Ghost Controls units near the harbor fail within two or three years, then bring them back with sealed connections and corrosion-resistant components where available. When a gate won’t open or a keypad ignores the code, we trace the problem from the operator to the sensor edges and the power run before quoting anything. Our full process and pricing are on Electric Gate Repair in Oxnard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Oxnard
Our Oxnard technicians are factory-trained on the brands families around here actually have: Viking, Ghost Controls, DoorKing, and Elite among them. We stock common boards, remotes, and replacement hinges in the service vans, so many repairs finish on the first visit instead of waiting for a part. See our brands for the full list we work on.
Pricing for Gate Company in Oxnard, CA
| Service | Typical range in Oxnard |
|---|---|
| Standard gate-latch replacement | $140-$260 |
| Wrought iron hinge replacement (per hinge) | $120-$220 |
| Gate sag repair and post re-shim | $200-$380 |
| Steel or iron gate frame repair | $300-$650 |
| Gate repaint and rust treatment | $450-$950 |
| Sliding gate track repair or replacement | $500-$1,100 |
| Gate operator wiring repair or replacement | $300-$700 |
| Operator control board replacement | $350-$800 |
| Remote and keypad replacement or programming | $100-$220 |
| Electric gate safety sensor replacement | $150-$350 |
Prices in Oxnard skew toward the upper end of these ranges when salt corrosion has spread to multiple components, or when a gate near the harbor needs marine-grade hardware and extra rust treatment before new parts go on. You will see the exact number in writing before any work begins, and that price is what you pay. No surprise line items after the fact.
Neighborhoods We Serve in Oxnard
We work throughout Oxnard, from the waterfront streets of Mandalay Bay and Channel Islands Harbor to older central neighborhoods and the newer developments near River Ridge. The drive across town rarely takes long, so response times stay short across the city.
- Mandalay Bay and Channel Islands Harbor
- River Ridge
- Central Oxnard (1950s-1970s tract neighborhoods)
- Oxnard Plain ranch and farm properties
- Silver Strand and Hollywood Beach
Service Area – Cities Near Oxnard
Beyond Oxnard, we also serve Port Hueneme, CA just down the coast, Camarillo, CA to the east, Santa Paula, CA inland, and Oak View, CA up toward the Ojai Valley. Each area gets the same written-price promise and the same cleanup routine.
Serving Oxnard, CA - Our Local Coverage Area
We’re based in the Oxnard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oxnard
We keep Oxnard on the schedule every weekday, and live dispatch answers around the clock at (626) 649-4572. Many service calls in Oxnard happen same-day or next-day depending on the time you call. Emergency repairs near the harbor are usually the fastest to route because our vans often work that side of the city.
Most gate repairs and like-for-like replacements don’t require a permit, but new installations with posts set in concrete or electrical runs may. If your Oxnard community has an HOA, gate style and height rules often apply, and we’ll check the requirements before quoting so you aren’t caught off guard later.
Yes, measurably. Homes near Channel Islands Harbor and Mandalay Bay see bare steel and standard operators fail within two or three years, while the same parts last far longer inland. We use marine-grade hardware and protective treatments where they’re needed, and we’ll tell you honestly what’s worth the upgrade and what isn’t.
For a free estimate on gate work in Oxnard, call (626) 649-4572. A live person answers, and the written price comes before anything gets touched.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oxnard Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs