Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Briar, TX
Briar gate work is different from what you’ll find in the suburbs just east of here. Most properties sit on one to ten acres of Parker County clay, with ranch-pipe swing gates or estate-style iron entries hung on posts that heave and shift every season. That means a gate that won’t close properly usually isn’t a simple hinge adjustment – it’s a post that’s moved out of plumb, an opener that was undersized from the start, or a latch frozen by a February ice storm. We’re Latch & Post Gate Repair, a Cedarwell-family gate specialist, and we focus on three things here: gate repair, gate installation, and electric gate repair. If you’re dealing with a gate that drags, binds, or won’t budge, call (626) 649-4572 and a live person will answer.
Why Briar Homes Are Different
The heavy black clay running through this corner of Parker and western Tarrant County expands dramatically after spring rain and shrinks just as much during July and August drought. That cycle works against every gate on the property. Posts rock, lean, and lose plumb with each wet-dry season, which throws the gate frame out of square and stresses the hinge welds. We see this repeat year after year – a gate that swung smoothly last fall dragging by June, and an opener that was quiet in March grinding by Labor Day.
The housing stock tells the same story. Most Briar homesteads went up between the 1980s and the 2010s on acreage lots, so the gate systems we service are predominantly agricultural-grade pipe gates and heavy custom iron, not the lightweight residential vinyl or wood panels common in Fort Worth neighborhoods. That matters because the opener’s workload is much higher here. A unit sized for a suburban driveway gate strains against a fifteen-foot pipe gate with six-inch posts set in shifting clay.
Winter ice storms are the other Briar constant. This northwest corridor catches freezing rain more often than central Fort Worth, and exposed rural entrances get the worst of it. Frozen latches, snapped opener arms, and bent brackets are all common after a hard freeze. The good news is that most of these failures are repairable without replacing the whole gate – if the post is still sound and the frame isn’t twisted.
Our Main Briar Services
Here are the three services Briar homeowners call us about most, each linked to its own detailed page.
Gate Repair in Briar
A sagging gate on a Briar acreage lot usually comes down to a post that’s shifted in the clay or a hinge that’s taken too much load for too long. We start by checking the post plumb and the hinge welds before quoting anything, because a new hinge won’t hold if the post is still leaning. Most repairs here involve resetting or bracing posts, welding cracked hinge plates, replacing worn latches, or straightening bent frames on pipe and ornamental iron gates. You’ll see the exact price in writing before we start, and every repair carries the 365-Day Done Right Promise. Learn more on our Gate Repair in Briar page.
Gate Installation in Briar
New gate installations in Briar need to be built for clay soil and ice, not just for the opening width. We measure the post depth and soil condition, confirm the gate weight against the opener you’re considering, and quote the full job – posts, gate, hardware, and automation if you want it – as one written price. We install ranch-pipe swing gates, custom iron estate gates, and the operators that move them. You’ll get a free measure and a written quote before any work begins. See what’s involved on our Gate Installation in Briar page.
Electric Gate Repair in Briar
When an automatic opener quits on a Briar driveway, the cause is often two things stacked together: an opener that was undersized for the gate from the start, and a post that’s shifted an inch or two out of plumb in the clay. That means the post reset and the opener repair or replacement usually need to be quoted together, not separately. We service FAAC, BFT, Linear, Viking, and other common brands, and we check the safety edges and photo sensors on every job. Electric Gate Repair in Briar has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Briar
We’re factory-trained on the opener brands families in Briar actually own, including FAAC, BFT, Linear, and Viking – plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Having the right parts and programming knowledge on the truck means most opener repairs are done in one visit. See our brands page for the full list.
Pricing for Gate Company in Briar, TX
Here are typical price ranges for the gate jobs we handle most often in Briar. Your written quote will be exact – these numbers show where most jobs land before we measure and inspect.
| Service | Typical range in Briar |
|---|---|
| Gate post reset or brace | $180-$420 |
| Hinge replacement or weld repair | $140-$360 |
| Latch or lock replacement | $95-$280 |
| Gate frame straightening | $200-$500 |
| Opener troubleshooting and repair | $150-$400 |
| Opener replacement (parts and labor) | $650-$1,400 |
| Safety edge or photo sensor replacement | $110-$300 |
| Full gate installation (standard swing gate) | $1,800-$4,500 |
| Custom iron or pipe gate installation | $3,000-$8,000+ |
What pushes a Briar job toward the top of these ranges is usually the post condition. If the clay has shifted a post several inches out of plumb, the reset work adds labor and often requires new concrete. The opener’s condition matters too – a strained unit that was undersized from the start needs replacement, not just a new control board. Every visit includes a written price before any work starts, so you’ll never see a surprise line item on the invoice.
Neighborhoods We Serve in Briar
We cover the full Briar area, from the ranch lots off Weatherford Highway to the acreage communities along Briar Road and the rural reaches near the Tarrant County line. Most jobs in this area can be scheduled within a few days of your call, and emergency gate-down situations on occupied homes get priority.
- Briar Oaks
- Chisholm Hills
- Woodland Hills
- Reno Valley
- Azle-area acreage communities
Service Area – Cities Near Briar
Briar is home base for this page, but our Dallas-Fort Worth office also coordinates gate work in nearby communities. We serve Dallas, TX, Fort Worth, TX, and Houston, TX with the same written-price commitment. For gate jobs in the San Antonio area, see our San Antonio, FL page.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Briar
Most non-emergency jobs in the Briar area are scheduled within a few days of your call. A gate that won’t close on an occupied home gets priority – call (626) 649-4572 and a live person will set the schedule with you directly. We never route you through a callback queue.
Many Briar acreage properties sit outside a stricter HOA structure, but some communities do have deed restrictions on gate height, material, or opener type. We can advise based on what we’ve seen in your area, and we’ll confirm any required approval before starting work.
You’ll get a technician in uniform who lays drop cloths inside and puts on shoe covers before stepping into the house. We explain the price before any work starts, and we take a photo of the clean-up before we leave. Every job is backed by the 365-Day Done Right Promise.
If your gate is binding, dragging, or the opener won’t respond, call (626) 649-4572 for a free estimate. We’ll talk through what’s happening, give you a straight answer, and schedule a time that works for your family.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Briar Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick